[Mon Dec 19 13:34:27 2011] Detection parameters:
  Position = (353.0, 285.1) = 23 23 17.54 -54 15 59.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 40.6 +/- 8.4
  Background counts = 4.1
  Rate = 0.004 +/- 0.0008

[Mon Dec 19 13:34:27 2011] Off-axis axis estimate = 4.07'
[Mon Dec 19 14:34:25 2011] Using EEF radius (= 8.47 ")to estimate initial spatial extent for simple fitting
[Mon Dec 19 14:34:25 2011] Initial guess for spatial extent in simple fitting = 8.47"
[Mon Dec 19 14:34:25 2011] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.836
[Mon Dec 19 14:34:25 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 8.47"
[Mon Dec 19 14:50:30 2011] fullrun_mos2_xmm0505383801_pi300-10000_cl_pass0_src5.ximg exists
[Mon Dec 19 14:50:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505383801_pi300-10000_cl_pass0_src5.csv
[Mon Dec 19 14:50:30 2011] fullrun_mos2_xmm0505383801_pi300-10000_cl_pass0_src5_1.ximg exists
[Mon Dec 19 14:50:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505383801_pi300-10000_cl_pass0_src5.csv
[Mon Dec 19 14:50:30 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505383801_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505383801_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 19 14:50:30 2011] fullrun_mos2_xmm0505383801_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Mon Dec 19 14:50:30 2011] fullrun_mos2_xmm0505383801_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Mon Dec 19 14:50:30 2011] Fit fullrun_mos2_xmm0505383801_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Mon Dec 19 14:50:37 2011] Spatial fit model total counts = 88.999300, observed total counts = 89.000000
[Mon Dec 19 14:50:37 2011] Offset between fit and detection position for source 8 = 0.165406 pixels
[Mon Dec 19 14:50:37 2011] 88.628700 total counts/ 60.863300 bgd. counts: snr = 3.558985
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.165406 pixels
  Position = (352.9, 285.2) = 23 23 17.57 -54 15 58.8
  Extent = 6.3 (4.4-8.2)", rotation angle = 0
  Source counts = 27.8 +/- 9.4
  Background counts = 60.9
  Rate = 0.002 +/- 0.0008
[Mon Dec 19 14:50:37 2011] Vigneting correction estimate = 1.000000
[Mon Dec 19 14:50:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 19 14:50:37 2011] Assessing source extent using major axis lower bound
[Mon Dec 19 14:50:37 2011] Source does appear to be extended
[Mon Dec 19 14:50:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 19 15:33:14 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Dec 19 15:33:14 2011] Initial guess for spatial extent in simple fitting = 6.26"
[Mon Dec 19 15:33:14 2011] source mask rpix=1.4, npix_max = 15, mask sum = 16, frac = 1.064
[Mon Dec 19 15:33:14 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 6.26"
[Mon Dec 19 15:46:38 2011] fullrun_mos2_xmm0505383801_pi300-10000_cl_pass1_src5.ximg exists
[Mon Dec 19 15:46:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505383801_pi300-10000_cl_pass1_src5.csv
[Mon Dec 19 15:46:38 2011] fullrun_mos2_xmm0505383801_pi300-10000_cl_pass1_src5_1.ximg exists
[Mon Dec 19 15:46:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505383801_pi300-10000_cl_pass1_src5.csv
[Mon Dec 19 15:46:38 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505383801_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505383801_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 19 15:46:38 2011] fullrun_mos2_xmm0505383801_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Mon Dec 19 15:46:38 2011] fullrun_mos2_xmm0505383801_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Mon Dec 19 15:46:38 2011] Fit fullrun_mos2_xmm0505383801_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Mon Dec 19 15:46:49 2011] Warning, spatial fit 5 centroid is now closest to src. 3
[Mon Dec 19 15:46:49 2011] Vigneting correction estimate = 1.000000
[Mon Dec 19 15:46:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 19 15:46:49 2011] Assessing source extent using major axis lower bound
[Mon Dec 19 15:46:49 2011] Source does appear to be extended
[Mon Dec 19 15:46:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 19 16:11:42 2011] XMMSAS src. selection expression = ellipse(30657.723500, 24766.364000, 375.463811, 375.463811, 0.000000, X, Y)
[Mon Dec 19 16:11:42 2011] Writing source region out to fullrun_mos2_xmm0505383801_pi300-10000_pass1_cl_src8_src.reg
[Mon Dec 19 16:11:42 2011] Extracting stamp from image fullrun_mos2_xmm0505383801_pi300-10000_cl_sm2.00.img.gz, (331, 264) - (375, 307)
[Mon Dec 19 16:11:42 2011] XMMSAS bgd. selection expression = annulus(30657.723500, 24766.364000, 625.773018, 1251.546036, X, Y)
[Mon Dec 19 16:11:42 2011] Writing fullrun_mos2_xmm0505383801_pi300-10000_pass1_cl_src8.gif
[Mon Dec 19 16:12:47 2011] Mean detx,y = (-3327.97, 172.92) 
[Mon Dec 19 16:12:49 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Dec 19 16:12:59 2011] Binned source spectrum to 10 counts/bin
[Mon Dec 19 16:12:59 2011] Setting source spectrum file to fullrun_mos2_xmm0505383801_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Mon Dec 19 16:12:59 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0505383801_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Mon Dec 19 16:18:49 2011] Not generating rmf since there are only 27 counts
[Mon Dec 19 16:18:49 2011] rmf not generated due to insufficient counts
[Mon Dec 19 16:19:31 2011] Updating aperture counts using extracted products
[Mon Dec 19 16:19:31 2011] Error reading totcts from fullrun_mos2_xmm0505383801_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Mon Dec 19 16:19:32 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec 19 16:19:32 2011] Using photon index=1.80, rate=0.00237, arf fullrun_mos2_xmm0505383801_pi300-10000_pass1_cl_src8.arf
[Mon Dec 19 16:19:32 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec 19 16:19:32 2011] Updating source flux to 3.1e-14
[Mon Dec 19 16:19:41 2011] Source 8 has fewer than 100.000000 counts, skipping spectral fitting