[Mon Dec 19 13:34:27 2011] Detection parameters:
  Position = (197.7, 179.8) = 23 24 34.81 -54 23 37.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 36.9 +/- 7.8
  Background counts = 4.4
  Rate = 0.003 +/- 0.0007

[Mon Dec 19 13:34:27 2011] Off-axis axis estimate = 11.28'
[Mon Dec 19 14:34:25 2011] Using EEF radius (= 12.07 ")to estimate initial spatial extent for simple fitting
[Mon Dec 19 14:34:25 2011] Initial guess for spatial extent in simple fitting = 12.07"
[Mon Dec 19 14:34:25 2011] source mask rpix=2.8, npix_max = 42, mask sum = 41, frac = 0.956
[Mon Dec 19 14:34:25 2011] Giving source the simple spatial ID 8 for pass 0, mean size = 12.07"
[Mon Dec 19 14:50:30 2011] fullrun_mos2_xmm0505383801_pi300-10000_cl_pass0_src8.ximg exists
[Mon Dec 19 14:50:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505383801_pi300-10000_cl_pass0_src8.csv
[Mon Dec 19 14:50:30 2011] fullrun_mos2_xmm0505383801_pi300-10000_cl_pass0_src8_1.ximg exists
[Mon Dec 19 14:50:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505383801_pi300-10000_cl_pass0_src8.csv
[Mon Dec 19 14:50:30 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505383801_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505383801_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 19 14:50:30 2011] fullrun_mos2_xmm0505383801_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Mon Dec 19 14:50:30 2011] fullrun_mos2_xmm0505383801_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Mon Dec 19 14:50:30 2011] Fit fullrun_mos2_xmm0505383801_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Mon Dec 19 14:50:37 2011] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 12.805721 pixels away
[Mon Dec 19 14:50:37 2011] Vigneting correction estimate = 1.000000
[Mon Dec 19 14:50:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 19 14:50:37 2011] Assessing source extent using major
[Mon Dec 19 14:50:37 2011] Source does appear to be extended
[Mon Dec 19 14:50:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 19 15:33:14 2011] Using EEF radius (= 12.07 ")to estimate initial spatial extent for simple fitting
[Mon Dec 19 15:33:14 2011] Initial guess for spatial extent in simple fitting = 12.07"
[Mon Dec 19 15:33:14 2011] source mask rpix=2.8, npix_max = 42, mask sum = 41, frac = 0.956
[Mon Dec 19 15:33:14 2011] Giving source the simple spatial ID 7 for pass 1, mean size = 12.07"
[Mon Dec 19 15:46:38 2011] fullrun_mos2_xmm0505383801_pi300-10000_cl_pass1_src7.ximg exists
[Mon Dec 19 15:46:38 2011] fullrun_mos2_xmm0505383801_pi300-10000_cl_pass1_src7_1.ximg exists
[Mon Dec 19 15:46:38 2011] Fit fullrun_mos2_xmm0505383801_pi300-10000_cl_pass1_src7 appears to have run properly
[Mon Dec 19 15:46:38 2011] fullrun_mos2_xmm0505383801_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Mon Dec 19 15:46:38 2011] fullrun_mos2_xmm0505383801_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Mon Dec 19 15:46:38 2011] Fit fullrun_mos2_xmm0505383801_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Mon Dec 19 15:46:49 2011] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 14.767058 pixels away
[Mon Dec 19 15:46:49 2011] Source 10 is offset by 6.982937 and -3.937458 pixels which is larger than
2 X fitted extent = 1.464920 x 1.464920, not incorporating fit results
[Mon Dec 19 15:46:49 2011] Vigneting correction estimate = 1.000000
[Mon Dec 19 15:46:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 19 15:46:49 2011] Assessing source extent using major
[Mon Dec 19 15:46:49 2011] Source does appear to be extended
[Mon Dec 19 15:46:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 19 16:11:42 2011] XMMSAS src. selection expression = ellipse(17151.597534, 15592.523178, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Dec 19 16:11:42 2011] Writing source region out to fullrun_mos2_xmm0505383801_pi300-10000_pass1_cl_src10_src.reg
[Mon Dec 19 16:11:42 2011] Extracting stamp from image fullrun_mos2_xmm0505383801_pi300-10000_cl_sm2.00.img.gz, (160, 142) - (235, 217)
[Mon Dec 19 16:11:42 2011] XMMSAS bgd. selection expression = annulus(17151.597534, 15592.523178, 1087.500000, 2175.000000, X, Y) && !ellipse(15576.223953, 14829.827515, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Dec 19 16:11:42 2011] Writing fullrun_mos2_xmm0505383801_pi300-10000_pass1_cl_src10.gif
[Mon Dec 19 16:13:33 2011] Mean detx,y = (2291.95, -15189.04) 
[Mon Dec 19 16:13:35 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Dec 19 16:13:46 2011] Binned source spectrum to 10 counts/bin
[Mon Dec 19 16:13:46 2011] Setting source spectrum file to fullrun_mos2_xmm0505383801_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Mon Dec 19 16:13:46 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0505383801_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Mon Dec 19 16:18:55 2011] Not generating rmf since there are only 36 counts
[Mon Dec 19 16:18:55 2011] rmf not generated due to insufficient counts
[Mon Dec 19 16:19:31 2011] Updating aperture counts using extracted products
[Mon Dec 19 16:19:32 2011] Error reading totcts from fullrun_mos2_xmm0505383801_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Mon Dec 19 16:19:32 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec 19 16:19:32 2011] Using photon index=1.80, rate=0.00315, arf fullrun_mos2_xmm0505383801_pi300-10000_pass1_cl_src10.arf
[Mon Dec 19 16:19:32 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec 19 16:19:32 2011] Updating source flux to 7.9e-14
[Mon Dec 19 16:19:41 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting