[Mon Dec 19 13:34:27 2011] Detection parameters:
  Position = (447.4, 282.1) = 23 22 30.65 -54 16 11.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 530.6 +/- 28.2
  Background counts = 5.7
  Rate = 0.09 +/- 0.005

[Mon Dec 19 13:34:27 2011] Off-axis axis estimate = 10.87'
[Mon Dec 19 14:34:25 2011] Using EEF radius (= 11.86 ")to estimate initial spatial extent for simple fitting
[Mon Dec 19 14:34:25 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Dec 19 14:34:25 2011] Initial guess for spatial extent in simple fitting = 11.86"
[Mon Dec 19 14:34:25 2011] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.008
[Mon Dec 19 14:34:25 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 11.86"
[Mon Dec 19 14:50:30 2011] fullrun_mos2_xmm0505383801_pi300-10000_cl_pass0_src1.ximg exists
[Mon Dec 19 14:50:30 2011] fullrun_mos2_xmm0505383801_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Dec 19 14:50:30 2011] Fit fullrun_mos2_xmm0505383801_pi300-10000_cl_pass0_src1 appears to have run properly
[Mon Dec 19 14:50:30 2011] fullrun_mos2_xmm0505383801_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Dec 19 14:50:30 2011] fullrun_mos2_xmm0505383801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Dec 19 14:50:30 2011] Fit fullrun_mos2_xmm0505383801_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Dec 19 14:50:37 2011] Spatial fit model total counts = 1047.000000, observed total counts = 1047.000000
[Mon Dec 19 14:50:37 2011] Offset between fit and detection position for source 1 = 0.606516 pixels
[Mon Dec 19 14:50:37 2011] 1051.231000 total counts/ 476.855000 bgd. counts: snr = 26.302869
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.606516 pixels
  Position = (447.0, 282.5) = 23 22 30.86 -54 16 9.5
  Extent = 11.7 (10.6-13.2)", rotation angle = 0
  Source counts = 574.4 +/- 32.4
  Background counts = 476.9
  Rate = 0.05 +/- 0.003
[Mon Dec 19 14:50:37 2011] Vigneting correction estimate = 1.000000
[Mon Dec 19 14:50:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 19 14:50:37 2011] Assessing source extent using major axis lower bound
[Mon Dec 19 14:50:37 2011] Source does appear to be extended
[Mon Dec 19 14:50:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 19 15:33:14 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Dec 19 15:33:14 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Dec 19 15:33:14 2011] Initial guess for spatial extent in simple fitting = 11.71"
[Mon Dec 19 15:33:14 2011] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.030
[Mon Dec 19 15:33:14 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 11.71"
[Mon Dec 19 15:46:38 2011] fullrun_mos2_xmm0505383801_pi300-10000_cl_pass1_src1.ximg exists
[Mon Dec 19 15:46:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505383801_pi300-10000_cl_pass1_src1.csv
[Mon Dec 19 15:46:38 2011] fullrun_mos2_xmm0505383801_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Dec 19 15:46:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505383801_pi300-10000_cl_pass1_src1.csv
[Mon Dec 19 15:46:38 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505383801_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505383801_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 19 15:46:38 2011] fullrun_mos2_xmm0505383801_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Dec 19 15:46:38 2011] fullrun_mos2_xmm0505383801_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Dec 19 15:46:38 2011] Fit fullrun_mos2_xmm0505383801_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Dec 19 15:46:49 2011] Warning, spatial fit 1 centroid is now closest to src. 2
[Mon Dec 19 15:46:49 2011] Vigneting correction estimate = 1.000000
[Mon Dec 19 15:46:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 19 15:46:49 2011] Assessing source extent using major axis lower bound
[Mon Dec 19 15:46:49 2011] Source does appear to be extended
[Mon Dec 19 15:46:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 19 16:11:42 2011] XMMSAS src. selection expression = ellipse(38840.456028, 24527.380200, 702.756020, 702.756020, 0.000000, X, Y)
[Mon Dec 19 16:11:42 2011] Writing source region out to fullrun_mos2_xmm0505383801_pi300-10000_pass1_cl_src1_src.reg
[Mon Dec 19 16:11:42 2011] Extracting stamp from image fullrun_mos2_xmm0505383801_pi300-10000_cl_sm2.00.img.gz, (407, 242) - (487, 323)
[Mon Dec 19 16:11:42 2011] XMMSAS bgd. selection expression = annulus(38840.456028, 24527.380200, 1171.260034, 2342.520067, X, Y)
[Mon Dec 19 16:11:42 2011] Writing fullrun_mos2_xmm0505383801_pi300-10000_pass1_cl_src1.gif
[Mon Dec 19 16:11:45 2011] Mean detx,y = (-10143.56, 4737.28) 
[Mon Dec 19 16:11:47 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Dec 19 16:12:05 2011] Binned source spectrum to 10 counts/bin
[Mon Dec 19 16:12:05 2011] Setting source spectrum file to fullrun_mos2_xmm0505383801_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Dec 19 16:12:05 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0505383801_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Dec 19 16:19:31 2011] Updating aperture counts using extracted products
[Mon Dec 19 16:19:31 2011] Error reading totcts from fullrun_mos2_xmm0505383801_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Dec 19 16:19:32 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec 19 16:19:32 2011] Using photon index=1.80, rate=0.0491, arf fullrun_mos2_xmm0505383801_pi300-10000_pass1_cl_src1.arf
[Mon Dec 19 16:19:32 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec 19 16:19:32 2011] Updating source flux to 8.7e-13
[Mon Dec 19 16:19:47 2011] Reading fit data from xmm0505383801/analysis//spectral/fullrun_mos2_xmm0505383801_pi300-10000_pass1_cl_src1_pl.csv
[Mon Dec 19 16:19:47 2011] Spectral fit parameter nH value = 1.23141e+21
[Mon Dec 19 16:19:47 2011] Spectral fit parameter PhoIndex value = 2.5166
[Mon Dec 19 16:19:47 2011] Failed to get F(0.3-8.0) from xmm0505383801/analysis//spectral/fullrun_mos2_xmm0505383801_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Dec 19 16:19:47 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec 19 16:19:47 2011] Using Nh = 1.2e+21, photon index=2.52, rate=0.0491, arf fullrun_mos2_xmm0505383801_pi300-10000_pass1_cl_src1.arf
[Mon Dec 19 16:19:47 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec 19 16:19:47 2011] Updating source flux to 7.2e-13