[Mon Dec 19 13:34:07 2011] Detection parameters:
  Position = (451.0, 293.9) = 23 22 28.91 -54 15 19.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 32.0 +/- 8.3
  Background counts = 8.2
  Rate = 0.005 +/- 0.001

[Mon Dec 19 13:34:07 2011] Off-axis axis estimate = 11.06'
[Mon Dec 19 14:10:42 2011] Using EEF radius (= 11.96 ")to estimate initial spatial extent for simple fitting
[Mon Dec 19 14:10:42 2011] Initial guess for spatial extent in simple fitting = 11.96"
[Mon Dec 19 14:10:42 2011] source mask rpix=2.7, npix_max = 42, mask sum = 36, frac = 0.852
[Mon Dec 19 14:10:42 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 11.96"
[Mon Dec 19 14:34:25 2011] fullrun_mos1_xmm0505383801_pi300-10000_cl_pass0_src4.ximg exists
[Mon Dec 19 14:34:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505383801_pi300-10000_cl_pass0_src4.csv
[Mon Dec 19 14:34:25 2011] fullrun_mos1_xmm0505383801_pi300-10000_cl_pass0_src4_1.ximg exists
[Mon Dec 19 14:34:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505383801_pi300-10000_cl_pass0_src4.csv
[Mon Dec 19 14:34:25 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505383801_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505383801_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 19 14:34:25 2011] fullrun_mos1_xmm0505383801_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Mon Dec 19 14:34:25 2011] fullrun_mos1_xmm0505383801_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Mon Dec 19 14:34:25 2011] Fit fullrun_mos1_xmm0505383801_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Mon Dec 19 14:50:35 2011] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 11.974325 pixels away
[Mon Dec 19 14:50:35 2011] Vigneting correction estimate = 1.000000
[Mon Dec 19 14:50:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 19 14:50:35 2011] Assessing source extent using major
[Mon Dec 19 14:50:35 2011] Source does appear to be extended
[Mon Dec 19 14:50:35 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 19 15:15:53 2011] Using EEF radius (= 11.96 ")to estimate initial spatial extent for simple fitting
[Mon Dec 19 15:15:53 2011] Initial guess for spatial extent in simple fitting = 11.96"
[Mon Dec 19 15:15:53 2011] source mask rpix=2.7, npix_max = 42, mask sum = 36, frac = 0.852
[Mon Dec 19 15:15:53 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 11.96"
[Mon Dec 19 15:33:14 2011] fullrun_mos1_xmm0505383801_pi300-10000_cl_pass1_src4.ximg exists
[Mon Dec 19 15:33:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505383801_pi300-10000_cl_pass1_src4.csv
[Mon Dec 19 15:33:14 2011] fullrun_mos1_xmm0505383801_pi300-10000_cl_pass1_src4_1.ximg exists
[Mon Dec 19 15:33:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505383801_pi300-10000_cl_pass1_src4.csv
[Mon Dec 19 15:33:14 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505383801_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505383801_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 19 15:33:14 2011] fullrun_mos1_xmm0505383801_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Mon Dec 19 15:33:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505383801_pi300-10000_cl_pass1_tfrozen_src4.csv
[Mon Dec 19 15:33:14 2011] fullrun_mos1_xmm0505383801_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Mon Dec 19 15:33:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505383801_pi300-10000_cl_pass1_tfrozen_src4.csv
[Mon Dec 19 15:33:14 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505383801_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505383801_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 19 15:46:46 2011] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 12.071119 pixels away
[Mon Dec 19 15:46:46 2011] Vigneting correction estimate = 1.000000
[Mon Dec 19 15:46:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 19 15:46:46 2011] Assessing source extent using major
[Mon Dec 19 15:46:46 2011] Source does appear to be extended
[Mon Dec 19 15:46:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 19 16:05:35 2011] XMMSAS src. selection expression = ellipse(39186.768921, 25522.485413, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Dec 19 16:05:35 2011] Writing source region out to fullrun_mos1_xmm0505383801_pi300-10000_pass1_cl_src6_src.reg
[Mon Dec 19 16:05:35 2011] Extracting stamp from image fullrun_mos1_xmm0505383801_pi300-10000_cl_sm2.00.img.gz, (413, 256) - (488, 331)
[Mon Dec 19 16:05:35 2011] XMMSAS bgd. selection expression = annulus(39186.768921, 25522.485413, 1087.500000, 2175.000000, X, Y) && !ellipse(38839.360400, 24555.967400, 1048.000030, 1048.000030, 0.000000, X, Y) && !ellipse(41652.183990, 23608.782776, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38075.612610, 24105.427246, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Dec 19 16:05:35 2011] Writing fullrun_mos1_xmm0505383801_pi300-10000_pass1_cl_src6.gif
[Mon Dec 19 16:06:40 2011] Mean detx,y = (5732.69, 9745.65) 
[Mon Dec 19 16:06:42 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Dec 19 16:06:57 2011] Binned source spectrum to 10 counts/bin
[Mon Dec 19 16:06:58 2011] Setting source spectrum file to fullrun_mos1_xmm0505383801_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Mon Dec 19 16:06:58 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0505383801_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Mon Dec 19 16:11:33 2011] Not generating rmf since there are only 32 counts
[Mon Dec 19 16:11:33 2011] rmf not generated due to insufficient counts
[Mon Dec 19 16:19:31 2011] Updating aperture counts using extracted products
[Mon Dec 19 16:19:31 2011] Error reading totcts from fullrun_mos1_xmm0505383801_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Mon Dec 19 16:19:31 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec 19 16:19:31 2011] Using photon index=1.80, rate=0.00479, arf fullrun_mos1_xmm0505383801_pi300-10000_pass1_cl_src6.arf
[Mon Dec 19 16:19:31 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec 19 16:19:31 2011] Updating source flux to 7.8e-14
[Mon Dec 19 16:19:33 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting