[Wed May  9 19:59:08 2012] Detection parameters:
  Position = (239.7, 329.8) = 23 21 37.96 -54 12 45.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 147.6 +/- 15.4
  Background counts = 9.7
  Rate = 0.03 +/- 0.003

[Wed May  9 19:59:13 2012] Off-axis axis estimate = 4.83'
[Wed May  9 20:02:07 2012] Using EEF radius (= 8.84 ")to estimate initial spatial extent for simple fitting
[Wed May  9 20:02:07 2012] Initial guess for spatial extent in simple fitting = 8.84"
[Wed May  9 20:02:07 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.974
[Wed May  9 20:02:07 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 8.84"
[Wed May  9 22:09:02 2012] fullrun_pn_xmm0505383701_pi300-10000_cl_pass0_src5.ximg exists
[Wed May  9 22:09:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505383701_pi300-10000_cl_pass0_src5.csv
[Wed May  9 22:09:02 2012] fullrun_pn_xmm0505383701_pi300-10000_cl_pass0_src5_1.ximg exists
[Wed May  9 22:09:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505383701_pi300-10000_cl_pass0_src5.csv
[Wed May  9 22:09:02 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505383701_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505383701_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  9 22:09:02 2012] fullrun_pn_xmm0505383701_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Wed May  9 22:09:02 2012] fullrun_pn_xmm0505383701_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Wed May  9 22:09:02 2012] Fit fullrun_pn_xmm0505383701_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Thu May 10 01:16:24 2012] Spatial fit model total counts = 228.906000, observed total counts = 219.000000
[Thu May 10 01:16:24 2012] Offset between fit and detection position for source 5 = 0.132890 pixels
[Thu May 10 01:16:24 2012] 229.426800 total counts/ 130.621000 bgd. counts: snr = 8.645218
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.132890 pixels
  Position = (239.8, 329.7) = 23 21 37.91 -54 12 46.0
  Extent = 4.9 (4.2-6.2)", rotation angle = 0
  Source counts = 98.8 +/- 15.1
  Background counts = 130.6
  Rate = 0.01 +/- 0.002
[Thu May 10 01:16:25 2012] Vigneting correction estimate = 1.000000
[Thu May 10 01:16:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 10 01:16:25 2012] Assessing source extent using major axis lower bound
[Thu May 10 01:16:25 2012] Source does appear to be extended
[Thu May 10 01:16:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 10 01:16:58 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 10 01:16:58 2012] Initial guess for spatial extent in simple fitting = 4.94"
[Thu May 10 01:16:58 2012] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.842
[Thu May 10 01:16:58 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 4.94"
[Thu May 10 03:08:47 2012] fullrun_pn_xmm0505383701_pi300-10000_cl_pass1_src5.ximg exists
[Thu May 10 03:08:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505383701_pi300-10000_cl_pass1_src5.csv
[Thu May 10 03:08:47 2012] fullrun_pn_xmm0505383701_pi300-10000_cl_pass1_src5_1.ximg exists
[Thu May 10 03:08:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505383701_pi300-10000_cl_pass1_src5.csv
[Thu May 10 03:08:47 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505383701_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505383701_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 03:08:48 2012] fullrun_pn_xmm0505383701_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Thu May 10 03:08:48 2012] fullrun_pn_xmm0505383701_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Thu May 10 03:08:48 2012] Fit fullrun_pn_xmm0505383701_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Thu May 10 05:39:14 2012] Spatial fit model total counts = 225.825000, observed total counts = 217.000000
[Thu May 10 05:39:14 2012] Offset between fit and detection position for source 5 = 0.033781 pixels
[Thu May 10 05:39:14 2012] 222.087000 total counts/ 121.596000 bgd. counts: snr = 9.113129
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.033781 pixels
  Position = (239.8, 329.7) = 23 21 37.90 -54 12 46.0
  Extent = 5.1 (4.3-6.3)", rotation angle = 0
  Source counts = 100.5 +/- 14.9
  Background counts = 121.6
  Rate = 0.01 +/- 0.002
[Thu May 10 05:39:15 2012] Vigneting correction estimate = 1.000000
[Thu May 10 05:39:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 10 05:39:15 2012] Assessing source extent using major axis lower bound
[Thu May 10 05:39:15 2012] Source does appear to be extended
[Thu May 10 05:39:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 10 05:39:48 2012] XMMSAS src. selection expression = ellipse(20817.897060, 28638.383600, 308.707809, 308.707809, 0.000000, X, Y)
[Thu May 10 05:39:48 2012] Writing source region out to fullrun_pn_xmm0505383701_pi300-10000_pass1_cl_src5_src.reg
[Thu May 10 05:39:48 2012] Extracting stamp from image fullrun_pn_xmm0505383701_pi300-10000_cl_sm2.00.img.gz, (222, 312) - (258, 347)
[Thu May 10 05:39:48 2012] XMMSAS bgd. selection expression = annulus(20817.897060, 28638.383600, 514.513015, 1029.026030, X, Y) && !ellipse(21946.114000, 28209.516000, 1335.904038, 1335.904038, 0.000000, X, Y)
[Thu May 10 05:39:48 2012] Writing fullrun_pn_xmm0505383701_pi300-10000_pass1_cl_src5.gif
[Thu May 10 05:45:46 2012] Mean detx,y = (-6795.12, 2110.36) 
[Thu May 10 05:45:53 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 10 05:46:48 2012] Binned source spectrum to 10 counts/bin
[Thu May 10 05:46:49 2012] Setting source spectrum file to fullrun_pn_xmm0505383701_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu May 10 05:46:49 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505383701_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Thu May 10 07:42:00 2012] Updating aperture counts using extracted products
[Thu May 10 07:42:00 2012] Error reading totcts from fullrun_pn_xmm0505383701_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu May 10 07:42:03 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 10 07:42:03 2012] Using photon index=1.80, rate=0.0117, arf fullrun_pn_xmm0505383701_pi300-10000_pass1_cl_src5.arf
[Thu May 10 07:42:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 10 07:42:03 2012] Updating source flux to 5.2e-14
[Thu May 10 07:43:14 2012] Reading fit data from xmm0505383701/analysis//spectral/fullrun_pn_xmm0505383701_pi300-10000_pass1_cl_src5_pl.csv
[Thu May 10 07:43:14 2012] Spectral fit parameter nH value = 2.55639e+20
[Thu May 10 07:43:14 2012] Spectral fit parameter PhoIndex value = 2.19329
[Thu May 10 07:43:14 2012] Failed to get F(0.3-8.0) from xmm0505383701/analysis//spectral/fullrun_pn_xmm0505383701_pi300-10000_pass1_cl_src5_pl.csv, possibly due to different flux energy range selected
[Thu May 10 07:43:14 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 10 07:43:14 2012] Using Nh = 2.6e+20, photon index=2.19, rate=0.0117, arf fullrun_pn_xmm0505383701_pi300-10000_pass1_cl_src5.arf
[Thu May 10 07:43:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 10 07:43:14 2012] Updating source flux to 4.3e-14