[Wed May  9 19:59:11 2012] Detection parameters:
  Position = (386.0, 216.8) = 23 20 25.26 -54 20 56.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 42.0 +/- 9.1
  Background counts = 10.5
  Rate = 0.009 +/- 0.002

[Wed May  9 19:59:13 2012] Off-axis axis estimate = 8.68'
[Wed May  9 20:02:07 2012] Using EEF radius (= 10.77 ")to estimate initial spatial extent for simple fitting
[Wed May  9 20:02:07 2012] Initial guess for spatial extent in simple fitting = 10.77"
[Wed May  9 20:02:07 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.017
[Wed May  9 20:02:07 2012] Giving source the simple spatial ID 22 for pass 0, mean size = 10.77"
[Wed May  9 22:09:02 2012] fullrun_pn_xmm0505383701_pi300-10000_cl_pass0_src22.ximg exists
[Wed May  9 22:09:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505383701_pi300-10000_cl_pass0_src22.csv
[Wed May  9 22:09:02 2012] fullrun_pn_xmm0505383701_pi300-10000_cl_pass0_src22_1.ximg exists
[Wed May  9 22:09:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505383701_pi300-10000_cl_pass0_src22.csv
[Wed May  9 22:09:02 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505383701_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505383701_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  9 22:09:02 2012] fullrun_pn_xmm0505383701_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Wed May  9 22:09:02 2012] fullrun_pn_xmm0505383701_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Wed May  9 22:09:02 2012] Fit fullrun_pn_xmm0505383701_pi300-10000_cl_pass0_tfrozen_src22 appears to have run properly
[Thu May 10 01:16:25 2012] Spatial fit model total counts = 146.416000, observed total counts = 133.000000
[Thu May 10 01:16:25 2012] Poor agreement between spatial fit and data for source 22
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May 10 01:16:25 2012] Vigneting correction estimate = 1.000000
[Thu May 10 01:16:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 10 01:16:25 2012] Assessing source extent using major
[Thu May 10 01:16:25 2012] Source does appear to be extended
[Thu May 10 01:16:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 10 01:16:58 2012] Using EEF radius (= 10.77 ")to estimate initial spatial extent for simple fitting
[Thu May 10 01:16:58 2012] Initial guess for spatial extent in simple fitting = 10.77"
[Thu May 10 01:16:58 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.017
[Thu May 10 01:16:58 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 10.77"
[Thu May 10 03:08:48 2012] fullrun_pn_xmm0505383701_pi300-10000_cl_pass1_src21.ximg exists
[Thu May 10 03:08:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505383701_pi300-10000_cl_pass1_src21.csv
[Thu May 10 03:08:48 2012] fullrun_pn_xmm0505383701_pi300-10000_cl_pass1_src21_1.ximg exists
[Thu May 10 03:08:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505383701_pi300-10000_cl_pass1_src21.csv
[Thu May 10 03:08:48 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505383701_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505383701_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 03:08:48 2012] fullrun_pn_xmm0505383701_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Thu May 10 03:08:48 2012] fullrun_pn_xmm0505383701_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Thu May 10 03:08:48 2012] Fit fullrun_pn_xmm0505383701_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Thu May 10 05:39:14 2012] Warning: source 21 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 22 at 13.340736 pixels away
[Thu May 10 05:39:15 2012] Vigneting correction estimate = 1.000000
[Thu May 10 05:39:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 10 05:39:15 2012] Assessing source extent using major
[Thu May 10 05:39:15 2012] Source does appear to be extended
[Thu May 10 05:39:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 10 05:39:49 2012] XMMSAS src. selection expression = ellipse(33534.434570, 18814.719833, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 10 05:39:49 2012] Writing source region out to fullrun_pn_xmm0505383701_pi300-10000_pass1_cl_src22_src.reg
[Thu May 10 05:39:49 2012] Extracting stamp from image fullrun_pn_xmm0505383701_pi300-10000_cl_sm2.00.img.gz, (349, 179) - (424, 254)
[Thu May 10 05:39:49 2012] XMMSAS bgd. selection expression = annulus(33534.434570, 18814.719833, 1087.500000, 2175.000000, X, Y)
[Thu May 10 05:39:49 2012] Writing fullrun_pn_xmm0505383701_pi300-10000_pass1_cl_src22.gif
[Thu May 10 06:04:00 2012] Mean detx,y = (9311.71, 2998.34) 
[Thu May 10 06:04:06 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 10 06:04:59 2012] Binned source spectrum to 10 counts/bin
[Thu May 10 06:05:00 2012] Setting source spectrum file to fullrun_pn_xmm0505383701_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Thu May 10 06:05:00 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505383701_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Thu May 10 06:54:03 2012] Not generating rmf since there are only 42 counts
[Thu May 10 06:54:03 2012] rmf not generated due to insufficient counts
[Thu May 10 07:42:02 2012] Updating aperture counts using extracted products
[Thu May 10 07:42:02 2012] Error reading totcts from fullrun_pn_xmm0505383701_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Thu May 10 07:42:04 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 10 07:42:04 2012] Using photon index=1.80, rate=0.00855, arf fullrun_pn_xmm0505383701_pi300-10000_pass1_cl_src22.arf
[Thu May 10 07:42:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 10 07:42:04 2012] Updating source flux to 3.3e-14
[Thu May 10 07:42:28 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting