[Wed May  9 19:59:09 2012] Detection parameters:
  Position = (164.8, 272.0) = 23 22 15.24 -54 16 55.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 120.2 +/- 14.2
  Background counts = 11.2
  Rate = 0.01 +/- 0.002

[Wed May  9 19:59:13 2012] Off-axis axis estimate = 9.88'
[Wed May  9 20:02:07 2012] Using EEF radius (= 11.37 ")to estimate initial spatial extent for simple fitting
[Wed May  9 20:02:07 2012] Initial guess for spatial extent in simple fitting = 11.37"
[Wed May  9 20:02:07 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.929
[Wed May  9 20:02:07 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 11.37"
[Wed May  9 22:09:02 2012] fullrun_pn_xmm0505383701_pi300-10000_cl_pass0_src10.ximg exists
[Wed May  9 22:09:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505383701_pi300-10000_cl_pass0_src10.csv
[Wed May  9 22:09:02 2012] fullrun_pn_xmm0505383701_pi300-10000_cl_pass0_src10_1.ximg exists
[Wed May  9 22:09:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505383701_pi300-10000_cl_pass0_src10.csv
[Wed May  9 22:09:02 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505383701_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505383701_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  9 22:09:02 2012] fullrun_pn_xmm0505383701_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Wed May  9 22:09:02 2012] fullrun_pn_xmm0505383701_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Wed May  9 22:09:02 2012] Fit fullrun_pn_xmm0505383701_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Thu May 10 01:16:24 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 14.673223 pixels away
[Thu May 10 01:16:25 2012] Vigneting correction estimate = 1.000000
[Thu May 10 01:16:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 10 01:16:25 2012] Assessing source extent using major
[Thu May 10 01:16:25 2012] Source does appear to be extended
[Thu May 10 01:16:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 10 01:16:58 2012] Using EEF radius (= 11.37 ")to estimate initial spatial extent for simple fitting
[Thu May 10 01:16:58 2012] Initial guess for spatial extent in simple fitting = 11.37"
[Thu May 10 01:16:58 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.929
[Thu May 10 01:16:58 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 11.37"
[Thu May 10 03:08:48 2012] fullrun_pn_xmm0505383701_pi300-10000_cl_pass1_src9.ximg exists
[Thu May 10 03:08:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505383701_pi300-10000_cl_pass1_src9.csv
[Thu May 10 03:08:48 2012] fullrun_pn_xmm0505383701_pi300-10000_cl_pass1_src9_1.ximg exists
[Thu May 10 03:08:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505383701_pi300-10000_cl_pass1_src9.csv
[Thu May 10 03:08:48 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505383701_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505383701_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 03:08:48 2012] fullrun_pn_xmm0505383701_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Thu May 10 03:08:48 2012] fullrun_pn_xmm0505383701_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Thu May 10 03:08:48 2012] Fit fullrun_pn_xmm0505383701_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Thu May 10 05:39:14 2012] Spatial fit model total counts = 205.998000, observed total counts = 206.000000
[Thu May 10 05:39:14 2012] Offset between fit and detection position for source 10 = 0.259801 pixels
[Thu May 10 05:39:14 2012] 207.857800 total counts/ 126.678000 bgd. counts: snr = 7.212692
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.259801 pixels
  Position = (165.0, 272.1) = 23 22 15.12 -54 16 55.8
  Extent = 5.4 (4.4-6.9)", rotation angle = 0
  Source counts = 81.2 +/- 14.4
  Background counts = 126.7
  Rate = 0.009 +/- 0.002
[Thu May 10 05:39:15 2012] Vigneting correction estimate = 1.000000
[Thu May 10 05:39:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 10 05:39:15 2012] Assessing source extent using major axis lower bound
[Thu May 10 05:39:15 2012] Source does appear to be extended
[Thu May 10 05:39:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 10 05:39:48 2012] XMMSAS src. selection expression = ellipse(14307.389400, 23623.964600, 321.454809, 321.454809, 0.000000, X, Y)
[Thu May 10 05:39:48 2012] Writing source region out to fullrun_pn_xmm0505383701_pi300-10000_pass1_cl_src10_src.reg
[Thu May 10 05:39:48 2012] Extracting stamp from image fullrun_pn_xmm0505383701_pi300-10000_cl_sm2.00.img.gz, (147, 254) - (183, 291)
[Thu May 10 05:39:48 2012] XMMSAS bgd. selection expression = annulus(14307.389400, 23623.964600, 535.758015, 1071.516031, X, Y)
[Thu May 10 05:39:48 2012] Writing fullrun_pn_xmm0505383701_pi300-10000_pass1_cl_src10.gif
[Thu May 10 05:49:44 2012] Mean detx,y = (-9342.30, 9926.09) 
[Thu May 10 05:49:51 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 10 05:50:41 2012] Binned source spectrum to 10 counts/bin
[Thu May 10 05:50:42 2012] Setting source spectrum file to fullrun_pn_xmm0505383701_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Thu May 10 05:50:42 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505383701_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Thu May 10 06:25:02 2012] Not generating rmf since there are only 81 counts
[Thu May 10 06:25:02 2012] rmf not generated due to insufficient counts
[Thu May 10 07:42:00 2012] Updating aperture counts using extracted products
[Thu May 10 07:42:00 2012] Error reading totcts from fullrun_pn_xmm0505383701_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Thu May 10 07:42:03 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 10 07:42:03 2012] Using photon index=1.80, rate=0.00941, arf fullrun_pn_xmm0505383701_pi300-10000_pass1_cl_src10.arf
[Thu May 10 07:42:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 10 07:42:03 2012] Updating source flux to 8.5e-14
[Thu May 10 07:42:28 2012] Source 10 has fewer than 100.000000 counts, skipping spectral fitting