[Wed May  9 19:59:20 2012] Detection parameters:
  Position = (274.3, 360.5) = 23 21 20.81 -54 10 30.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 17.5 +/- 5.7
  Background counts = 3.4
  Rate = 0.002 +/- 0.0008

[Wed May  9 19:59:24 2012] Off-axis axis estimate = 4.83'
[Wed May  9 23:05:16 2012] Using EEF radius (= 8.84 ")to estimate initial spatial extent for simple fitting
[Wed May  9 23:05:16 2012] Initial guess for spatial extent in simple fitting = 8.84"
[Wed May  9 23:05:16 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.974
[Wed May  9 23:05:16 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 8.84"
[Thu May 10 01:16:11 2012] fullrun_mos2_xmm0505383701_pi300-10000_cl_pass0_src20.ximg exists
[Thu May 10 01:16:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505383701_pi300-10000_cl_pass0_src20.csv
[Thu May 10 01:16:11 2012] fullrun_mos2_xmm0505383701_pi300-10000_cl_pass0_src20_1.ximg exists
[Thu May 10 01:16:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505383701_pi300-10000_cl_pass0_src20.csv
[Thu May 10 01:16:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505383701_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505383701_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 01:16:11 2012] fullrun_mos2_xmm0505383701_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Thu May 10 01:16:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505383701_pi300-10000_cl_pass0_tfrozen_src20.csv
[Thu May 10 01:16:11 2012] fullrun_mos2_xmm0505383701_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Thu May 10 01:16:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505383701_pi300-10000_cl_pass0_tfrozen_src20.csv
[Thu May 10 01:16:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505383701_pi300-10000_cl_pass0_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505383701_pi300-10000_cl_pass0_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 01:16:24 2012] Warning, spatial fit 9 centroid is now closest to src. 1
[Thu May 10 01:16:38 2012] Warning, spatial fit 16 centroid is now closest to src. 10
[Thu May 10 01:16:38 2012] Source 4 is offset by -1.845529 and 7.571843 pixels which is larger than
2 X fitted extent = 8.131586 x 1.501007, not incorporating fit results
[Thu May 10 01:16:38 2012] Vigneting correction estimate = 1.000000
[Thu May 10 01:16:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 10 01:16:38 2012] Assessing source extent using major
[Thu May 10 01:16:38 2012] Source does appear to be extended
[Thu May 10 01:16:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 10 04:03:02 2012] Using EEF radius (= 8.84 ")to estimate initial spatial extent for simple fitting
[Thu May 10 04:03:02 2012] Initial guess for spatial extent in simple fitting = 8.84"
[Thu May 10 04:03:02 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.974
[Thu May 10 04:03:02 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 8.84"
[Thu May 10 05:39:00 2012] fullrun_mos2_xmm0505383701_pi300-10000_cl_pass1_src19.ximg exists
[Thu May 10 05:39:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505383701_pi300-10000_cl_pass1_src19.csv
[Thu May 10 05:39:00 2012] fullrun_mos2_xmm0505383701_pi300-10000_cl_pass1_src19_1.ximg exists
[Thu May 10 05:39:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505383701_pi300-10000_cl_pass1_src19.csv
[Thu May 10 05:39:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505383701_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505383701_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 05:39:01 2012] fullrun_mos2_xmm0505383701_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Thu May 10 05:39:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505383701_pi300-10000_cl_pass1_tfrozen_src19.csv
[Thu May 10 05:39:01 2012] fullrun_mos2_xmm0505383701_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Thu May 10 05:39:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505383701_pi300-10000_cl_pass1_tfrozen_src19.csv
[Thu May 10 05:39:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505383701_pi300-10000_cl_pass1_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505383701_pi300-10000_cl_pass1_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 05:39:14 2012] Warning, spatial fit 8 centroid is now closest to src. 1
[Thu May 10 05:39:29 2012] Spatial fit model total counts = 46.921000, observed total counts = 39.000000
[Thu May 10 05:39:29 2012] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May 10 05:39:29 2012] Vigneting correction estimate = 1.000000
[Thu May 10 05:39:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 10 05:39:29 2012] Assessing source extent using major
[Thu May 10 05:39:29 2012] Source does appear to be extended
[Thu May 10 05:39:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 10 07:12:57 2012] XMMSAS src. selection expression = ellipse(23814.162567, 31315.982361, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 10 07:12:57 2012] Writing source region out to fullrun_mos2_xmm0505383701_pi300-10000_pass1_cl_src4_src.reg
[Thu May 10 07:12:57 2012] Extracting stamp from image fullrun_mos2_xmm0505383701_pi300-10000_cl_sm2.00.img.gz, (237, 323) - (312, 398)
[Thu May 10 07:12:57 2012] XMMSAS bgd. selection expression = annulus(23814.162567, 31315.982361, 1087.500000, 2175.000000, X, Y)
[Thu May 10 07:12:57 2012] Writing fullrun_mos2_xmm0505383701_pi300-10000_pass1_cl_src4.gif
[Thu May 10 07:25:06 2012] Mean detx,y = (6057.64, 1639.96) 
[Thu May 10 07:25:10 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 10 07:26:10 2012] Binned source spectrum to 10 counts/bin
[Thu May 10 07:26:10 2012] Setting source spectrum file to fullrun_mos2_xmm0505383701_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Thu May 10 07:26:10 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505383701_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Thu May 10 07:41:21 2012] Not generating rmf since there are only 17 counts
[Thu May 10 07:41:21 2012] rmf not generated due to insufficient counts
[Thu May 10 07:42:09 2012] Updating aperture counts using extracted products
[Thu May 10 07:42:09 2012] Error reading totcts from fullrun_mos2_xmm0505383701_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Thu May 10 07:42:10 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 10 07:42:10 2012] Using photon index=1.80, rate=0.00237, arf fullrun_mos2_xmm0505383701_pi300-10000_pass1_cl_src4.arf
[Thu May 10 07:42:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 10 07:42:10 2012] Updating source flux to 3.3e-14
[Thu May 10 07:42:13 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting