[Wed May  9 19:59:17 2012] Detection parameters:
  Position = (430.0, 321.0) = 23 20 3.56 -54 13 23.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 55.9 +/- 9.4
  Background counts = 4.6
  Rate = 0.009 +/- 0.001

[Wed May  9 19:59:18 2012] Off-axis axis estimate = 9.68'
[Wed May  9 22:09:02 2012] Using EEF radius (= 11.27 ")to estimate initial spatial extent for simple fitting
[Wed May  9 22:09:02 2012] Initial guess for spatial extent in simple fitting = 11.27"
[Wed May  9 22:09:02 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.942
[Wed May  9 22:09:02 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 11.27"
[Wed May  9 23:05:16 2012] fullrun_mos1_xmm0505383701_pi300-10000_cl_pass0_src3.ximg exists
[Wed May  9 23:05:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505383701_pi300-10000_cl_pass0_src3.csv
[Wed May  9 23:05:16 2012] fullrun_mos1_xmm0505383701_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed May  9 23:05:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505383701_pi300-10000_cl_pass0_src3.csv
[Wed May  9 23:05:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505383701_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505383701_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  9 23:05:16 2012] fullrun_mos1_xmm0505383701_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed May  9 23:05:16 2012] fullrun_mos1_xmm0505383701_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed May  9 23:05:16 2012] Fit fullrun_mos1_xmm0505383701_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Thu May 10 01:16:31 2012] Spatial fit model total counts = 92.680000, observed total counts = 88.000000
[Thu May 10 01:16:31 2012] Offset between fit and detection position for source 7 = 0.176645 pixels
[Thu May 10 01:16:31 2012] 93.324300 total counts/ 56.962700 bgd. counts: snr = 4.817788
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.176645 pixels
  Position = (429.9, 321.0) = 23 20 3.65 -54 13 23.0
  Extent = 4.5 (3.4-6.2)", rotation angle = 0
  Source counts = 36.4 +/- 9.7
  Background counts = 57.0
  Rate = 0.004 +/- 0.0009
[Thu May 10 01:16:31 2012] Vigneting correction estimate = 1.000000
[Thu May 10 01:16:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 10 01:16:31 2012] Assessing source extent using major axis lower bound
[Thu May 10 01:16:31 2012] Source does appear to be extended
[Thu May 10 01:16:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 10 03:08:48 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 10 03:08:48 2012] Initial guess for spatial extent in simple fitting = 4.54"
[Thu May 10 03:08:48 2012] source mask rpix=1.0, npix_max = 9, mask sum = 12, frac = 1.259
[Thu May 10 03:08:48 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 4.54"
[Thu May 10 04:03:02 2012] fullrun_mos1_xmm0505383701_pi300-10000_cl_pass1_src3.ximg exists
[Thu May 10 04:03:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505383701_pi300-10000_cl_pass1_src3.csv
[Thu May 10 04:03:02 2012] fullrun_mos1_xmm0505383701_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu May 10 04:03:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505383701_pi300-10000_cl_pass1_src3.csv
[Thu May 10 04:03:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505383701_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505383701_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 04:03:02 2012] fullrun_mos1_xmm0505383701_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu May 10 04:03:02 2012] fullrun_mos1_xmm0505383701_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu May 10 04:03:02 2012] Fit fullrun_mos1_xmm0505383701_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Thu May 10 05:39:20 2012] Spatial fit model total counts = 88.025300, observed total counts = 81.000000
[Thu May 10 05:39:20 2012] Offset between fit and detection position for source 7 = 0.028170 pixels
[Thu May 10 05:39:20 2012] 88.581400 total counts/ 50.894200 bgd. counts: snr = 5.282746
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.028170 pixels
  Position = (429.9, 321.0) = 23 20 3.65 -54 13 23.1
  Extent = 4.8 (3.4-6.3)", rotation angle = 0
  Source counts = 37.7 +/- 9.4
  Background counts = 50.9
  Rate = 0.004 +/- 0.0009
[Thu May 10 05:39:20 2012] Vigneting correction estimate = 1.000000
[Thu May 10 05:39:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 10 05:39:20 2012] Assessing source extent using major axis lower bound
[Thu May 10 05:39:20 2012] Source does appear to be extended
[Thu May 10 05:39:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 10 06:57:08 2012] XMMSAS src. selection expression = ellipse(37349.568400, 27878.598400, 286.332557, 286.332557, 0.000000, X, Y)
[Thu May 10 06:57:08 2012] Writing source region out to fullrun_mos1_xmm0505383701_pi300-10000_pass1_cl_src7_src.reg
[Thu May 10 06:57:08 2012] Extracting stamp from image fullrun_mos1_xmm0505383701_pi300-10000_cl_sm2.00.img.gz, (413, 305) - (446, 337)
[Thu May 10 06:57:08 2012] XMMSAS bgd. selection expression = annulus(37349.568400, 27878.598400, 477.220929, 954.441857, X, Y)
[Thu May 10 06:57:08 2012] Writing fullrun_mos1_xmm0505383701_pi300-10000_pass1_cl_src7.gif
[Thu May 10 06:58:31 2012] Mean detx,y = (6700.29, 6917.24) 
[Thu May 10 06:58:34 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 10 06:59:12 2012] Binned source spectrum to 10 counts/bin
[Thu May 10 06:59:13 2012] Setting source spectrum file to fullrun_mos1_xmm0505383701_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Thu May 10 06:59:13 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505383701_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Thu May 10 07:09:57 2012] Not generating rmf since there are only 37 counts
[Thu May 10 07:09:57 2012] rmf not generated due to insufficient counts
[Thu May 10 07:42:05 2012] Updating aperture counts using extracted products
[Thu May 10 07:42:05 2012] Error reading totcts from fullrun_mos1_xmm0505383701_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Thu May 10 07:42:06 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 10 07:42:06 2012] Using photon index=1.80, rate=0.0037, arf fullrun_mos1_xmm0505383701_pi300-10000_pass1_cl_src7.arf
[Thu May 10 07:42:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 10 07:42:06 2012] Updating source flux to 7.1e-14
[Thu May 10 07:42:12 2012] Source 7 has fewer than 100.000000 counts, skipping spectral fitting
[Thu May 10 07:42:13 2012] xmm0505383701/analysis//spectral/fullrun_mos1_xmm0505383701_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete