[Fri Jun 15 20:45:24 2012] Detection parameters:
  Position = (273.6, 353.1) = 23 32 41.43 -54 32 1.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 137.7 +/- 18.6
  Background counts = 82.9
  Rate = 0.01 +/- 0.002

[Fri Jun 15 20:45:24 2012] Off-axis axis estimate = 4.36'
[Fri Jun 15 20:47:32 2012] Using EEF radius (= 8.61 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 20:47:32 2012] Initial guess for spatial extent in simple fitting = 8.61"
[Fri Jun 15 20:47:32 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.017
[Fri Jun 15 20:47:32 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 8.61"
[Fri Jun 15 21:09:18 2012] fullrun_pn_xmm0505383501_pi300-10000_cl_pass0_src9.ximg exists
[Fri Jun 15 21:09:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505383501_pi300-10000_cl_pass0_src9.csv
[Fri Jun 15 21:09:18 2012] fullrun_pn_xmm0505383501_pi300-10000_cl_pass0_src9_1.ximg exists
[Fri Jun 15 21:09:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505383501_pi300-10000_cl_pass0_src9.csv
[Fri Jun 15 21:09:19 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505383501_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505383501_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 21:09:19 2012] fullrun_pn_xmm0505383501_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Fri Jun 15 21:09:19 2012] fullrun_pn_xmm0505383501_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Fri Jun 15 21:09:19 2012] Fit fullrun_pn_xmm0505383501_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Fri Jun 15 21:37:33 2012] Source 9 is offset by 8.494429 and 3.807526 pixels which is larger than
2 X fitted extent = 2.097232 x 2.097232, not incorporating fit results
[Fri Jun 15 21:37:33 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 21:37:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 21:37:33 2012] Assessing source extent using major
[Fri Jun 15 21:37:33 2012] Source does appear to be extended
[Fri Jun 15 21:37:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 21:37:44 2012] Using EEF radius (= 8.61 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 21:37:44 2012] Initial guess for spatial extent in simple fitting = 8.61"
[Fri Jun 15 21:37:44 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.017
[Fri Jun 15 21:37:44 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 8.61"
[Fri Jun 15 21:57:21 2012] fullrun_pn_xmm0505383501_pi300-10000_cl_pass1_src9.ximg exists
[Fri Jun 15 21:57:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505383501_pi300-10000_cl_pass1_src9.csv
[Fri Jun 15 21:57:21 2012] fullrun_pn_xmm0505383501_pi300-10000_cl_pass1_src9_1.ximg exists
[Fri Jun 15 21:57:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505383501_pi300-10000_cl_pass1_src9.csv
[Fri Jun 15 21:57:21 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505383501_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505383501_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 21:57:22 2012] fullrun_pn_xmm0505383501_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Fri Jun 15 21:57:22 2012] fullrun_pn_xmm0505383501_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Fri Jun 15 21:57:22 2012] Fit fullrun_pn_xmm0505383501_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Fri Jun 15 22:24:10 2012] Source 9 is offset by 8.494429 and 3.781640 pixels which is larger than
2 X fitted extent = 2.046589 x 2.046589, not incorporating fit results
[Fri Jun 15 22:24:10 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 22:24:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 22:24:10 2012] Assessing source extent using major
[Fri Jun 15 22:24:10 2012] Source does appear to be extended
[Fri Jun 15 22:24:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 22:24:21 2012] XMMSAS src. selection expression = ellipse(23753.001312, 30674.046722, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 15 22:24:21 2012] Writing source region out to fullrun_pn_xmm0505383501_pi300-10000_pass1_cl_src9_src.reg
[Fri Jun 15 22:24:21 2012] Extracting stamp from image fullrun_pn_xmm0505383501_pi300-10000_cl_sm2.00.img.gz, (236, 316) - (311, 391)
[Fri Jun 15 22:24:21 2012] XMMSAS bgd. selection expression = annulus(23753.001312, 30674.046722, 1087.500000, 2175.000000, X, Y)
[Fri Jun 15 22:24:21 2012] Writing fullrun_pn_xmm0505383501_pi300-10000_pass1_cl_src9.gif
[Fri Jun 15 22:30:29 2012] Mean detx,y = (2076.15, 5659.21) 
[Fri Jun 15 22:30:30 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 22:30:49 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 22:30:50 2012] Setting source spectrum file to fullrun_pn_xmm0505383501_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Fri Jun 15 22:30:50 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505383501_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Fri Jun 15 22:35:10 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun 15 22:35:10 2012] rmf not generated due to insufficient counts
[Fri Jun 15 22:52:16 2012] Updating aperture counts using extracted products
[Fri Jun 15 22:52:16 2012] Error reading totcts from fullrun_pn_xmm0505383501_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Fri Jun 15 22:52:17 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 15 22:52:17 2012] Using photon index=1.80, rate=0.0136, arf fullrun_pn_xmm0505383501_pi300-10000_pass1_cl_src9.arf
[Fri Jun 15 22:52:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 15 22:52:17 2012] Updating source flux to 4.2e-14
[Fri Jun 15 22:52:35 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun 15 22:52:36 2012] xmm0505383501/analysis//spectral/fullrun_pn_xmm0505383501_pi300-10000_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete