[Fri Jun 15 20:46:01 2012] Detection parameters:
  Position = (151.0, 238.2) = 23 33 42.95 -54 40 20.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 36.5 +/- 8.7
  Background counts = 14.0
  Rate = 0.002 +/- 0.0006

[Fri Jun 15 20:46:01 2012] Off-axis axis estimate = 11.55'
[Fri Jun 15 21:20:57 2012] Using EEF radius (= 12.20 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 21:20:57 2012] Initial guess for spatial extent in simple fitting = 12.20"
[Fri Jun 15 21:20:57 2012] source mask rpix=2.8, npix_max = 43, mask sum = 32, frac = 0.732
[Fri Jun 15 21:20:57 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 12.20"
[Fri Jun 15 21:37:29 2012] fullrun_mos2_xmm0505383501_pi300-10000_cl_pass0_src15.ximg exists
[Fri Jun 15 21:37:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505383501_pi300-10000_cl_pass0_src15.csv
[Fri Jun 15 21:37:29 2012] fullrun_mos2_xmm0505383501_pi300-10000_cl_pass0_src15_1.ximg exists
[Fri Jun 15 21:37:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505383501_pi300-10000_cl_pass0_src15.csv
[Fri Jun 15 21:37:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505383501_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505383501_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 21:37:30 2012] fullrun_mos2_xmm0505383501_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Fri Jun 15 21:37:30 2012] fullrun_mos2_xmm0505383501_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Fri Jun 15 21:37:30 2012] Fit fullrun_mos2_xmm0505383501_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Fri Jun 15 21:37:38 2012] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 16.400400 pixels away
[Fri Jun 15 21:37:38 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 21:37:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 21:37:38 2012] Assessing source extent using major
[Fri Jun 15 21:37:38 2012] Source does appear to be extended
[Fri Jun 15 21:37:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 22:08:22 2012] Using EEF radius (= 12.20 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 22:08:22 2012] Initial guess for spatial extent in simple fitting = 12.20"
[Fri Jun 15 22:08:22 2012] source mask rpix=2.8, npix_max = 43, mask sum = 32, frac = 0.732
[Fri Jun 15 22:08:22 2012] Giving source the simple spatial ID 14 for pass 1, mean size = 12.20"
[Fri Jun 15 22:24:06 2012] fullrun_mos2_xmm0505383501_pi300-10000_cl_pass1_src14.ximg exists
[Fri Jun 15 22:24:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505383501_pi300-10000_cl_pass1_src14.csv
[Fri Jun 15 22:24:06 2012] fullrun_mos2_xmm0505383501_pi300-10000_cl_pass1_src14_1.ximg exists
[Fri Jun 15 22:24:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505383501_pi300-10000_cl_pass1_src14.csv
[Fri Jun 15 22:24:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505383501_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505383501_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 22:24:07 2012] fullrun_mos2_xmm0505383501_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Fri Jun 15 22:24:07 2012] fullrun_mos2_xmm0505383501_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Fri Jun 15 22:24:07 2012] Fit fullrun_mos2_xmm0505383501_pi300-10000_cl_pass1_tfrozen_src14 appears to have run properly
[Fri Jun 15 22:24:14 2012] Spatial fit model total counts = 164.736000, observed total counts = 155.000000
[Fri Jun 15 22:24:14 2012] Offset between fit and detection position for source 14 = 0.132038 pixels
[Fri Jun 15 22:24:14 2012] 167.937200 total counts/ 143.415000 bgd. counts: snr = 2.047680
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.132038 pixels
  Position = (151.1, 238.2) = 23 33 42.89 -54 40 20.7
  Extent = 3.8 (3.1-5.8)", rotation angle = 0
  Source counts = 24.5 +/- 13.0
  Background counts = 143.4
  Rate = 0.002 +/- 0.0008
[Fri Jun 15 22:24:14 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 22:24:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 22:24:14 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 22:24:14 2012] Source does appear to be extended
[Fri Jun 15 22:24:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 22:43:57 2012] XMMSAS src. selection expression = ellipse(13099.811200, 20679.201200, 229.486207, 229.486207, 0.000000, X, Y)
[Fri Jun 15 22:43:57 2012] Writing source region out to fullrun_mos2_xmm0505383501_pi300-10000_pass1_cl_src14_src.reg
[Fri Jun 15 22:43:57 2012] Extracting stamp from image fullrun_mos2_xmm0505383501_pi300-10000_cl_sm2.00.img.gz, (138, 225) - (164, 251)
[Fri Jun 15 22:43:57 2012] XMMSAS bgd. selection expression = annulus(13099.811200, 20679.201200, 382.477011, 764.954022, X, Y)
[Fri Jun 15 22:43:57 2012] Writing fullrun_mos2_xmm0505383501_pi300-10000_pass1_cl_src14.gif
[Fri Jun 15 22:46:38 2012] Mean detx,y = (-10139.21, 6321.94) 
[Fri Jun 15 22:46:39 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 22:46:50 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 22:46:50 2012] Setting source spectrum file to fullrun_mos2_xmm0505383501_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Fri Jun 15 22:46:50 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505383501_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Fri Jun 15 22:51:49 2012] Not generating rmf since there are only 24 counts
[Fri Jun 15 22:51:49 2012] rmf not generated due to insufficient counts
[Fri Jun 15 22:52:17 2012] Updating aperture counts using extracted products
[Fri Jun 15 22:52:17 2012] Error reading totcts from fullrun_mos2_xmm0505383501_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Fri Jun 15 22:52:17 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 15 22:52:17 2012] Using photon index=1.80, rate=0.00155, arf fullrun_mos2_xmm0505383501_pi300-10000_pass1_cl_src14.arf
[Fri Jun 15 22:52:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 15 22:52:17 2012] Updating source flux to 5.3e-14
[Fri Jun 15 22:52:28 2012] Source 14 has fewer than 100.000000 counts, skipping spectral fitting