[Fri Jun 15 20:46:01 2012] Detection parameters:
  Position = (315.6, 298.7) = 23 32 20.43 -54 35 59.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 756.4 +/- 33.7
  Background counts = 16.6
  Rate = 0.05 +/- 0.002

[Fri Jun 15 20:46:01 2012] Off-axis axis estimate = 1.24'
[Fri Jun 15 21:20:57 2012] Using EEF radius (= 7.05 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 21:20:57 2012] Initial guess for spatial extent in simple fitting = 7.05"
[Fri Jun 15 21:20:57 2012] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.112
[Fri Jun 15 21:20:57 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.05"
[Fri Jun 15 21:37:29 2012] fullrun_mos2_xmm0505383501_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jun 15 21:37:29 2012] fullrun_mos2_xmm0505383501_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jun 15 21:37:29 2012] Fit fullrun_mos2_xmm0505383501_pi300-10000_cl_pass0_src1 appears to have run properly
[Fri Jun 15 21:37:29 2012] fullrun_mos2_xmm0505383501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jun 15 21:37:29 2012] fullrun_mos2_xmm0505383501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jun 15 21:37:29 2012] Fit fullrun_mos2_xmm0505383501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Jun 15 21:37:38 2012] Spatial fit model total counts = 848.361000, observed total counts = 846.000000
[Fri Jun 15 21:37:38 2012] Offset between fit and detection position for source 1 = 0.200655 pixels
[Fri Jun 15 21:37:38 2012] 848.144000 total counts/ 350.349000 bgd. counts: snr = 26.595006
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.200655 pixels
  Position = (315.4, 298.6) = 23 32 20.51 -54 35 59.6
  Extent = 4.6 (4.3-5.0)", rotation angle = 0
  Source counts = 497.8 +/- 29.1
  Background counts = 350.3
  Rate = 0.03 +/- 0.002
[Fri Jun 15 21:37:38 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 21:37:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 21:37:38 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 21:37:38 2012] Source does appear to be extended
[Fri Jun 15 21:37:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 22:08:22 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 15 22:08:22 2012] Initial guess for spatial extent in simple fitting = 4.64"
[Fri Jun 15 22:08:22 2012] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.916
[Fri Jun 15 22:08:22 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 4.64"
[Fri Jun 15 22:24:06 2012] fullrun_mos2_xmm0505383501_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jun 15 22:24:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505383501_pi300-10000_cl_pass1_src1.csv
[Fri Jun 15 22:24:06 2012] fullrun_mos2_xmm0505383501_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jun 15 22:24:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505383501_pi300-10000_cl_pass1_src1.csv
[Fri Jun 15 22:24:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505383501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505383501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 22:24:06 2012] fullrun_mos2_xmm0505383501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jun 15 22:24:06 2012] fullrun_mos2_xmm0505383501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jun 15 22:24:06 2012] Fit fullrun_mos2_xmm0505383501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jun 15 22:24:14 2012] Spatial fit model total counts = 839.999000, observed total counts = 840.000000
[Fri Jun 15 22:24:14 2012] Offset between fit and detection position for source 1 = 0.011351 pixels
[Fri Jun 15 22:24:14 2012] 847.534000 total counts/ 351.727000 bgd. counts: snr = 26.436856
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.011351 pixels
  Position = (315.4, 298.6) = 23 32 20.51 -54 35 59.6
  Extent = 4.6 (4.3-5.0)", rotation angle = 0
  Source counts = 495.8 +/- 29.1
  Background counts = 351.7
  Rate = 0.03 +/- 0.002
[Fri Jun 15 22:24:14 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 22:24:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 22:24:14 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 22:24:14 2012] Source does appear to be extended
[Fri Jun 15 22:24:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 22:43:57 2012] XMMSAS src. selection expression = ellipse(27391.989200, 25929.568600, 278.767208, 278.767208, 0.000000, X, Y)
[Fri Jun 15 22:43:57 2012] Writing source region out to fullrun_mos2_xmm0505383501_pi300-10000_pass1_cl_src1_src.reg
[Fri Jun 15 22:43:57 2012] Extracting stamp from image fullrun_mos2_xmm0505383501_pi300-10000_cl_sm2.00.img.gz, (299, 283) - (331, 315)
[Fri Jun 15 22:43:57 2012] XMMSAS bgd. selection expression = annulus(27391.989200, 25929.568600, 464.612013, 929.224027, X, Y) && !ellipse(27827.390686, 27358.132843, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 15 22:43:57 2012] Writing fullrun_mos2_xmm0505383501_pi300-10000_pass1_cl_src1.gif
[Fri Jun 15 22:43:59 2012] Mean detx,y = (2625.32, -1965.06) 
[Fri Jun 15 22:44:00 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 22:44:04 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 22:44:04 2012] Setting source spectrum file to fullrun_mos2_xmm0505383501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jun 15 22:44:04 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505383501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Jun 15 22:52:17 2012] Updating aperture counts using extracted products
[Fri Jun 15 22:52:17 2012] Error reading totcts from fullrun_mos2_xmm0505383501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jun 15 22:52:17 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 15 22:52:17 2012] Using photon index=1.80, rate=0.0314, arf fullrun_mos2_xmm0505383501_pi300-10000_pass1_cl_src1.arf
[Fri Jun 15 22:52:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 15 22:52:17 2012] Updating source flux to 3.8e-13
[Fri Jun 15 22:52:35 2012] Reading fit data from xmm0505383501/analysis//spectral/fullrun_mos2_xmm0505383501_pi300-10000_pass1_cl_src1_pl.csv
[Fri Jun 15 22:52:35 2012] Spectral fit parameter nH value = 616218000000.0
[Fri Jun 15 22:52:35 2012] Spectral fit parameter PhoIndex value = 2.07867
[Fri Jun 15 22:52:35 2012] Failed to get F(0.3-8.0) from xmm0505383501/analysis//spectral/fullrun_mos2_xmm0505383501_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Jun 15 22:52:35 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 15 22:52:35 2012] Using Nh = 6.2e+11, photon index=2.08, rate=0.0314, arf fullrun_mos2_xmm0505383501_pi300-10000_pass1_cl_src1.arf
[Fri Jun 15 22:52:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 15 22:52:35 2012] Updating source flux to 3.4e-13