[Fri Jun 15 20:45:41 2012] Detection parameters:
  Position = (210.1, 275.2) = 23 33 13.24 -54 37 39.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 79.5 +/- 12.1
  Background counts = 17.8
  Rate = 0.006 +/- 0.0009

[Fri Jun 15 20:45:41 2012] Off-axis axis estimate = 6.62'
[Fri Jun 15 21:09:19 2012] Using EEF radius (= 9.74 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 21:09:19 2012] Initial guess for spatial extent in simple fitting = 9.74"
[Fri Jun 15 21:09:19 2012] source mask rpix=2.2, npix_max = 30, mask sum = 36, frac = 1.200
[Fri Jun 15 21:09:19 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 9.74"
[Fri Jun 15 21:20:57 2012] fullrun_mos1_xmm0505383501_pi300-10000_cl_pass0_src3.ximg exists
[Fri Jun 15 21:20:57 2012] fullrun_mos1_xmm0505383501_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Jun 15 21:20:57 2012] Fit fullrun_mos1_xmm0505383501_pi300-10000_cl_pass0_src3 appears to have run properly
[Fri Jun 15 21:20:57 2012] fullrun_mos1_xmm0505383501_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Jun 15 21:20:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505383501_pi300-10000_cl_pass0_tfrozen_src3.csv
[Fri Jun 15 21:20:57 2012] fullrun_mos1_xmm0505383501_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Jun 15 21:20:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505383501_pi300-10000_cl_pass0_tfrozen_src3.csv
[Fri Jun 15 21:20:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505383501_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505383501_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 21:37:35 2012] Spatial fit model total counts = 211.206000, observed total counts = 201.000000
[Fri Jun 15 21:37:35 2012] Offset between fit and detection position for source 6 = 0.133944 pixels
[Fri Jun 15 21:37:35 2012] 211.312600 total counts/ 144.472000 bgd. counts: snr = 5.560944
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.133944 pixels
  Position = (210.1, 275.1) = 23 33 13.28 -54 37 41.4
  Extent = 7.0" x 4.8", rotation angle = 290
  Source counts = 66.8 +/- 14.5
  Background counts = 144.5
  Rate = 0.004 +/- 0.0009
[Fri Jun 15 21:37:35 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 21:37:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 21:37:35 2012] Assessing source extent using major
[Fri Jun 15 21:37:35 2012] Source does appear to be extended
[Fri Jun 15 21:37:35 2012] Computing asymmetry using major and minor axis, asym = 1.47
[Fri Jun 15 21:57:22 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 15 21:57:22 2012] Initial guess for spatial extent in simple fitting = 5.89"
[Fri Jun 15 21:57:22 2012] source mask rpix=1.4, npix_max = 13, mask sum = 16, frac = 1.162
[Fri Jun 15 21:57:22 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 5.89"
[Fri Jun 15 22:08:22 2012] fullrun_mos1_xmm0505383501_pi300-10000_cl_pass1_src3.ximg exists
[Fri Jun 15 22:08:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505383501_pi300-10000_cl_pass1_src3.csv
[Fri Jun 15 22:08:22 2012] fullrun_mos1_xmm0505383501_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Jun 15 22:08:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505383501_pi300-10000_cl_pass1_src3.csv
[Fri Jun 15 22:08:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505383501_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505383501_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 22:08:22 2012] fullrun_mos1_xmm0505383501_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Jun 15 22:08:22 2012] fullrun_mos1_xmm0505383501_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Jun 15 22:08:22 2012] Fit fullrun_mos1_xmm0505383501_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Jun 15 22:24:12 2012] Spatial fit model total counts = 209.594000, observed total counts = 201.000000
[Fri Jun 15 22:24:12 2012] Offset between fit and detection position for source 6 = 0.149599 pixels
[Fri Jun 15 22:24:12 2012] 209.782300 total counts/ 142.832000 bgd. counts: snr = 5.601957
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.149599 pixels
  Position = (210.0, 275.2) = 23 33 13.31 -54 37 40.8
  Extent = 5.8 (4.4-7.4)", rotation angle = 0
  Source counts = 67.0 +/- 14.5
  Background counts = 142.8
  Rate = 0.004 +/- 0.0009
[Fri Jun 15 22:24:12 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 22:24:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 22:24:12 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 22:24:12 2012] Source does appear to be extended
[Fri Jun 15 22:24:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 22:36:29 2012] XMMSAS src. selection expression = ellipse(18222.770694, 23896.061400, 347.056210, 347.056210, 0.000000, X, Y)
[Fri Jun 15 22:36:29 2012] Writing source region out to fullrun_mos1_xmm0505383501_pi300-10000_pass1_cl_src6_src.reg
[Fri Jun 15 22:36:29 2012] Extracting stamp from image fullrun_mos1_xmm0505383501_pi300-10000_cl_sm2.00.img.gz, (190, 255) - (230, 295)
[Fri Jun 15 22:36:29 2012] XMMSAS bgd. selection expression = annulus(18222.770694, 23896.061400, 578.427017, 1156.854033, X, Y)
[Fri Jun 15 22:36:29 2012] Writing fullrun_mos1_xmm0505383501_pi300-10000_pass1_cl_src6.gif
[Fri Jun 15 22:36:56 2012] Mean detx,y = (2245.11, 5694.00) 
[Fri Jun 15 22:36:57 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 22:37:13 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 22:37:13 2012] Setting source spectrum file to fullrun_mos1_xmm0505383501_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Fri Jun 15 22:37:13 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505383501_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Fri Jun 15 22:43:10 2012] Not generating rmf since there are only 66 counts
[Fri Jun 15 22:43:10 2012] rmf not generated due to insufficient counts
[Fri Jun 15 22:52:17 2012] Updating aperture counts using extracted products
[Fri Jun 15 22:52:17 2012] Error reading totcts from fullrun_mos1_xmm0505383501_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Fri Jun 15 22:52:17 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 15 22:52:17 2012] Using photon index=1.80, rate=0.00424, arf fullrun_mos1_xmm0505383501_pi300-10000_pass1_cl_src6.arf
[Fri Jun 15 22:52:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 15 22:52:17 2012] Updating source flux to 5.3e-14
[Fri Jun 15 22:52:18 2012] Source 6 has fewer than 100.000000 counts, skipping spectral fitting