[Thu May 31 15:58:06 2012] Detection parameters:
  Position = (326.7, 296.9) = 23 29 56.47 -54 38 7.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 23.2 +/- 6.7
  Background counts = 5.4
  Rate = 0.002 +/- 0.0006

[Thu May 31 15:58:06 2012] Off-axis axis estimate = 2.05'
[Thu May 31 16:57:33 2012] Using EEF radius (= 7.45 ")to estimate initial spatial extent for simple fitting
[Thu May 31 16:57:33 2012] Initial guess for spatial extent in simple fitting = 7.45"
[Thu May 31 16:57:33 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.020
[Thu May 31 16:57:33 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 7.45"
[Thu May 31 17:14:38 2012] fullrun_mos2_xmm0505383401_pi300-10000_cl_pass0_src10.ximg exists
[Thu May 31 17:14:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505383401_pi300-10000_cl_pass0_src10.csv
[Thu May 31 17:14:38 2012] fullrun_mos2_xmm0505383401_pi300-10000_cl_pass0_src10_1.ximg exists
[Thu May 31 17:14:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505383401_pi300-10000_cl_pass0_src10.csv
[Thu May 31 17:14:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505383401_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505383401_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 17:14:38 2012] fullrun_mos2_xmm0505383401_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Thu May 31 17:14:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505383401_pi300-10000_cl_pass0_tfrozen_src10.csv
[Thu May 31 17:14:38 2012] fullrun_mos2_xmm0505383401_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Thu May 31 17:14:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505383401_pi300-10000_cl_pass0_tfrozen_src10.csv
[Thu May 31 17:14:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505383401_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505383401_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 17:14:47 2012] Source 9 is offset by 0.976119 and -8.409804 pixels which is larger than
2 X fitted extent = 0.838759 x 0.838759, not incorporating fit results
[Thu May 31 17:14:47 2012] Source 9 is offset by 0.190719 and -7.330999 pixels which is larger than
2 X fitted extent = 0.856800 x 0.856800, not incorporating fit results
[Thu May 31 17:14:47 2012] Vigneting correction estimate = 1.000000
[Thu May 31 17:14:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 17:14:47 2012] Assessing source extent using major
[Thu May 31 17:14:47 2012] Source does appear to be extended
[Thu May 31 17:14:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 18:04:29 2012] Using EEF radius (= 7.45 ")to estimate initial spatial extent for simple fitting
[Thu May 31 18:04:29 2012] Initial guess for spatial extent in simple fitting = 7.45"
[Thu May 31 18:04:29 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.020
[Thu May 31 18:04:29 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 7.45"
[Thu May 31 18:20:10 2012] fullrun_mos2_xmm0505383401_pi300-10000_cl_pass1_src9.ximg exists
[Thu May 31 18:20:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505383401_pi300-10000_cl_pass1_src9.csv
[Thu May 31 18:20:10 2012] fullrun_mos2_xmm0505383401_pi300-10000_cl_pass1_src9_1.ximg exists
[Thu May 31 18:20:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505383401_pi300-10000_cl_pass1_src9.csv
[Thu May 31 18:20:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505383401_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505383401_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 18:20:10 2012] fullrun_mos2_xmm0505383401_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Thu May 31 18:20:10 2012] fullrun_mos2_xmm0505383401_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Thu May 31 18:20:10 2012] Fit fullrun_mos2_xmm0505383401_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Thu May 31 18:20:19 2012] Spatial fit model total counts = 125.216000, observed total counts = 114.000000
[Thu May 31 18:20:19 2012] Offset between fit and detection position for source 9 = 0.341779 pixels
[Thu May 31 18:20:19 2012] 126.903100 total counts/ 116.475000 bgd. counts: snr = 0.966248
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.341779 pixels
  Position = (327.0, 296.8) = 23 29 56.31 -54 38 8.0
  Extent = 3.6 (2.1-6.1)", rotation angle = 0
  Source counts = 10.4 +/- 11.3
  Background counts = 116.5
  Rate = 0.0009 +/- 0.0009
  Deleting source due to low Poisson probability