[Thu May 31 15:58:06 2012] Detection parameters:
  Position = (500.7, 367.2) = 23 28 29.48 -54 32 53.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 43.8 +/- 9.1
  Background counts = 3.6
  Rate = 0.004 +/- 0.0008

[Thu May 31 15:58:06 2012] Off-axis axis estimate = 15.49'
[Thu May 31 16:57:33 2012] Using EEF radius (= 14.17 ")to estimate initial spatial extent for simple fitting
[Thu May 31 16:57:33 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 31 16:57:33 2012] Initial guess for spatial extent in simple fitting = 14.17"
[Thu May 31 16:57:33 2012] source mask rpix=3.3, npix_max = 56, mask sum = 56, frac = 0.991
[Thu May 31 16:57:33 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 14.17"
[Thu May 31 17:14:38 2012] fullrun_mos2_xmm0505383401_pi300-10000_cl_pass0_src7.ximg exists
[Thu May 31 17:14:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505383401_pi300-10000_cl_pass0_src7.csv
[Thu May 31 17:14:38 2012] fullrun_mos2_xmm0505383401_pi300-10000_cl_pass0_src7_1.ximg exists
[Thu May 31 17:14:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505383401_pi300-10000_cl_pass0_src7.csv
[Thu May 31 17:14:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505383401_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505383401_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 17:14:38 2012] fullrun_mos2_xmm0505383401_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Thu May 31 17:14:38 2012] fullrun_mos2_xmm0505383401_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Thu May 31 17:14:38 2012] Fit fullrun_mos2_xmm0505383401_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Thu May 31 17:14:47 2012] Spatial fit model total counts = 91.932400, observed total counts = 85.000000
[Thu May 31 17:14:47 2012] Offset between fit and detection position for source 4 = 0.163297 pixels
[Thu May 31 17:14:47 2012] 89.671700 total counts/ 59.169400 bgd. counts: snr = 3.965373
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.163297 pixels
  Position = (500.6, 367.3) = 23 28 29.53 -54 32 58.8
  Extent = 6.7 (5.2-11.5)", rotation angle = 0
  Source counts = 30.5 +/- 9.5
  Background counts = 59.2
  Rate = 0.003 +/- 0.0008
[Thu May 31 17:14:47 2012] Vigneting correction estimate = 1.000000
[Thu May 31 17:14:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 17:14:47 2012] Assessing source extent using major axis lower bound
[Thu May 31 17:14:47 2012] Source does appear to be extended
[Thu May 31 17:14:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 18:04:29 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 31 18:04:29 2012] Initial guess for spatial extent in simple fitting = 6.71"
[Thu May 31 18:04:29 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.959
[Thu May 31 18:04:29 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 6.71"
[Thu May 31 18:20:10 2012] fullrun_mos2_xmm0505383401_pi300-10000_cl_pass1_src7.ximg exists
[Thu May 31 18:20:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505383401_pi300-10000_cl_pass1_src7.csv
[Thu May 31 18:20:10 2012] fullrun_mos2_xmm0505383401_pi300-10000_cl_pass1_src7_1.ximg exists
[Thu May 31 18:20:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505383401_pi300-10000_cl_pass1_src7.csv
[Thu May 31 18:20:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505383401_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505383401_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 18:20:10 2012] fullrun_mos2_xmm0505383401_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Thu May 31 18:20:10 2012] fullrun_mos2_xmm0505383401_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Thu May 31 18:20:10 2012] Fit fullrun_mos2_xmm0505383401_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Thu May 31 18:20:19 2012] Spatial fit model total counts = 75.981900, observed total counts = 71.000000
[Thu May 31 18:20:19 2012] Offset between fit and detection position for source 4 = 0.029681 pixels
[Thu May 31 18:20:19 2012] 73.670400 total counts/ 45.530300 bgd. counts: snr = 4.170378
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.029681 pixels
  Position = (500.7, 367.3) = 23 28 29.52 -54 32 58.7
  Extent = 6.5 (4.9-9.5)", rotation angle = 0
  Source counts = 28.1 +/- 8.6
  Background counts = 45.5
  Rate = 0.002 +/- 0.0007
[Thu May 31 18:20:19 2012] Vigneting correction estimate = 1.000000
[Thu May 31 18:20:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 18:20:19 2012] Assessing source extent using major axis lower bound
[Thu May 31 18:20:19 2012] Source does appear to be extended
[Thu May 31 18:20:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 18:48:11 2012] XMMSAS src. selection expression = ellipse(43508.611200, 31907.267800, 388.883411, 388.883411, 0.000000, X, Y)
[Thu May 31 18:48:11 2012] Writing source region out to fullrun_mos2_xmm0505383401_pi300-10000_pass1_cl_src4_src.reg
[Thu May 31 18:48:11 2012] Extracting stamp from image fullrun_mos2_xmm0505383401_pi300-10000_cl_sm2.00.img.gz, (478, 345) - (523, 390)
[Thu May 31 18:48:11 2012] XMMSAS bgd. selection expression = annulus(43508.611200, 31907.267800, 648.139019, 1296.278037, X, Y)
[Thu May 31 18:48:11 2012] Writing fullrun_mos2_xmm0505383401_pi300-10000_pass1_cl_src4.gif
[Thu May 31 18:49:17 2012] Mean detx,y = (-11502.79, 11929.97) 
[Thu May 31 18:49:18 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 31 18:49:29 2012] Binned source spectrum to 10 counts/bin
[Thu May 31 18:49:29 2012] Setting source spectrum file to fullrun_mos2_xmm0505383401_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Thu May 31 18:49:29 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505383401_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Thu May 31 18:50:09 2012] Not generating rmf since there are only 28 counts
[Thu May 31 18:50:09 2012] rmf not generated due to insufficient counts
[Thu May 31 18:50:42 2012] Updating aperture counts using extracted products
[Thu May 31 18:50:42 2012] Error reading totcts from fullrun_mos2_xmm0505383401_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Thu May 31 18:50:42 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 31 18:50:42 2012] Using photon index=1.80, rate=0.00232, arf fullrun_mos2_xmm0505383401_pi300-10000_pass1_cl_src4.arf
[Thu May 31 18:50:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 31 18:50:42 2012] Updating source flux to 9.1e-14
[Thu May 31 18:50:44 2012] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Thu May 31 18:50:45 2012] xmm0505383401/analysis//spectral/fullrun_mos2_xmm0505383401_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete