[Thu May 31 15:57:50 2012] Detection parameters:
  Position = (375.1, 337.0) = 23 29 32.28 -54 35 12.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 31.5 +/- 7.4
  Background counts = 5.2
  Rate = 0.003 +/- 0.0007

[Thu May 31 15:57:50 2012] Off-axis axis estimate = 6.22'
[Thu May 31 16:32:13 2012] Using EEF radius (= 9.54 ")to estimate initial spatial extent for simple fitting
[Thu May 31 16:32:13 2012] Initial guess for spatial extent in simple fitting = 9.54"
[Thu May 31 16:32:13 2012] source mask rpix=2.2, npix_max = 28, mask sum = 34, frac = 1.172
[Thu May 31 16:32:13 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 9.54"
[Thu May 31 16:57:33 2012] fullrun_mos1_xmm0505383401_pi300-10000_cl_pass0_src11.ximg exists
[Thu May 31 16:57:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505383401_pi300-10000_cl_pass0_src11.csv
[Thu May 31 16:57:33 2012] fullrun_mos1_xmm0505383401_pi300-10000_cl_pass0_src11_1.ximg exists
[Thu May 31 16:57:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505383401_pi300-10000_cl_pass0_src11.csv
[Thu May 31 16:57:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505383401_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505383401_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 16:57:33 2012] fullrun_mos1_xmm0505383401_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Thu May 31 16:57:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505383401_pi300-10000_cl_pass0_tfrozen_src11.csv
[Thu May 31 16:57:33 2012] fullrun_mos1_xmm0505383401_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Thu May 31 16:57:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505383401_pi300-10000_cl_pass0_tfrozen_src11.csv
[Thu May 31 16:57:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505383401_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505383401_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 17:14:46 2012] Source 7 is offset by 7.542353 and -5.570463 pixels which is larger than
2 X fitted extent = 1.666667 x 1.666667, not incorporating fit results
[Thu May 31 17:14:46 2012] Vigneting correction estimate = 1.000000
[Thu May 31 17:14:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 17:14:46 2012] Assessing source extent using major
[Thu May 31 17:14:46 2012] Source does appear to be extended
[Thu May 31 17:14:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 17:45:19 2012] Using EEF radius (= 9.54 ")to estimate initial spatial extent for simple fitting
[Thu May 31 17:45:19 2012] Initial guess for spatial extent in simple fitting = 9.54"
[Thu May 31 17:45:19 2012] source mask rpix=2.2, npix_max = 28, mask sum = 34, frac = 1.172
[Thu May 31 17:45:19 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 9.54"
[Thu May 31 18:04:28 2012] fullrun_mos1_xmm0505383401_pi300-10000_cl_pass1_src9.ximg exists
[Thu May 31 18:04:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505383401_pi300-10000_cl_pass1_src9.csv
[Thu May 31 18:04:28 2012] fullrun_mos1_xmm0505383401_pi300-10000_cl_pass1_src9_1.ximg exists
[Thu May 31 18:04:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505383401_pi300-10000_cl_pass1_src9.csv
[Thu May 31 18:04:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505383401_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505383401_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 18:04:29 2012] fullrun_mos1_xmm0505383401_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Thu May 31 18:04:29 2012] fullrun_mos1_xmm0505383401_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Thu May 31 18:04:29 2012] Fit fullrun_mos1_xmm0505383401_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Thu May 31 18:20:17 2012] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 84.494804 pixels away
[Thu May 31 18:20:17 2012] Spatial fit model total counts = 93.246900, observed total counts = 85.000000
[Thu May 31 18:20:17 2012] Offset between fit and detection position for source 7 = 0.110885 pixels
[Thu May 31 18:20:17 2012] 90.752900 total counts/ 71.764500 bgd. counts: snr = 2.241473
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.110885 pixels
  Position = (375.0, 337.0) = 23 29 32.34 -54 35 12.9
  Extent = 3.9 (2.4-6.4)", rotation angle = 0
  Source counts = 19.0 +/- 9.5
  Background counts = 71.8
  Rate = 0.002 +/- 0.0008
[Thu May 31 18:20:17 2012] Vigneting correction estimate = 1.000000
[Thu May 31 18:20:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 18:20:17 2012] Assessing source extent using major axis lower bound
[Thu May 31 18:20:17 2012] Source does appear to be extended
[Thu May 31 18:20:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 18:44:40 2012] XMMSAS src. selection expression = ellipse(32572.244260, 29268.666600, 236.838607, 236.838607, 0.000000, X, Y)
[Thu May 31 18:44:40 2012] Writing source region out to fullrun_mos1_xmm0505383401_pi300-10000_pass1_cl_src7_src.reg
[Thu May 31 18:44:40 2012] Extracting stamp from image fullrun_mos1_xmm0505383401_pi300-10000_cl_sm2.00.img.gz, (361, 323) - (389, 351)
[Thu May 31 18:44:40 2012] XMMSAS bgd. selection expression = annulus(32572.244260, 29268.666600, 394.731011, 789.462023, X, Y)
[Thu May 31 18:44:40 2012] Writing fullrun_mos1_xmm0505383401_pi300-10000_pass1_cl_src7.gif
[Thu May 31 18:46:17 2012] Mean detx,y = (4659.83, 2969.42) 
[Thu May 31 18:46:18 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 31 18:46:23 2012] Binned source spectrum to 10 counts/bin
[Thu May 31 18:46:23 2012] Setting source spectrum file to fullrun_mos1_xmm0505383401_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Thu May 31 18:46:23 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505383401_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Thu May 31 18:47:48 2012] Not generating rmf since there are only 18 counts
[Thu May 31 18:47:48 2012] rmf not generated due to insufficient counts
[Thu May 31 18:50:42 2012] Updating aperture counts using extracted products
[Thu May 31 18:50:42 2012] Error reading totcts from fullrun_mos1_xmm0505383401_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Thu May 31 18:50:42 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 31 18:50:42 2012] Using photon index=1.80, rate=0.00157, arf fullrun_mos1_xmm0505383401_pi300-10000_pass1_cl_src7.arf
[Thu May 31 18:50:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 31 18:50:42 2012] Updating source flux to 2.7e-14
[Thu May 31 18:50:43 2012] Flag b found in src. 7 procflags, skipping spectral fitting
[Thu May 31 18:50:43 2012] Source 7 has fewer than 100.000000 counts, skipping spectral fitting
[Thu May 31 18:50:44 2012] xmm0505383401/analysis//spectral/fullrun_mos1_xmm0505383401_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete