[Sat Nov 26 02:56:29 2011] Detection parameters:
  Position = (320.8, 154.8) = 23 27 21.46 -54 48 30.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 87.6 +/- 14.1
  Background counts = 35.1
  Rate = 0.009 +/- 0.001

[Sat Nov 26 02:56:29 2011] Off-axis axis estimate = 10.54'
[Sat Nov 26 04:04:36 2011] Using EEF radius (= 11.70 ")to estimate initial spatial extent for simple fitting
[Sat Nov 26 04:04:36 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Nov 26 04:04:36 2011] Initial guess for spatial extent in simple fitting = 11.70"
[Sat Nov 26 04:04:36 2011] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.885
[Sat Nov 26 04:04:36 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 11.70"
[Sat Nov 26 04:12:31 2011] fullrun_mos2_xmm0505383301_pi300-10000_cl_pass0_src1.ximg exists
[Sat Nov 26 04:12:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505383301_pi300-10000_cl_pass0_src1.csv
[Sat Nov 26 04:12:31 2011] fullrun_mos2_xmm0505383301_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Nov 26 04:12:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505383301_pi300-10000_cl_pass0_src1.csv
[Sat Nov 26 04:12:31 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505383301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505383301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Nov 26 04:12:31 2011] fullrun_mos2_xmm0505383301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Nov 26 04:12:31 2011] fullrun_mos2_xmm0505383301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Nov 26 04:12:31 2011] Fit fullrun_mos2_xmm0505383301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Nov 26 04:12:43 2011] Spatial fit model total counts = 165.998000, observed total counts = 166.000000
[Sat Nov 26 04:12:43 2011] Offset between fit and detection position for source 4 = 0.447302 pixels
[Sat Nov 26 04:12:43 2011] 165.526100 total counts/ 108.769000 bgd. counts: snr = 5.442114
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.447302 pixels
  Position = (320.6, 155.2) = 23 27 21.55 -54 48 27.8
  Extent = 10.1 (3.4-15.4)", rotation angle = 0
  Source counts = 56.8 +/- 12.9
  Background counts = 108.8
  Rate = 0.003 +/- 0.0008
[Sat Nov 26 04:12:43 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 04:12:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 04:12:43 2011] Assessing source extent using major axis lower bound
[Sat Nov 26 04:12:43 2011] Source does appear to be extended
[Sat Nov 26 04:12:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Nov 26 05:09:54 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Nov 26 05:09:54 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Nov 26 05:09:54 2011] Initial guess for spatial extent in simple fitting = 10.11"
[Sat Nov 26 05:09:54 2011] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.940
[Sat Nov 26 05:09:54 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 10.11"
[Sat Nov 26 05:16:30 2011] fullrun_mos2_xmm0505383301_pi300-10000_cl_pass1_src1.ximg exists
[Sat Nov 26 05:16:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505383301_pi300-10000_cl_pass1_src1.csv
[Sat Nov 26 05:16:30 2011] fullrun_mos2_xmm0505383301_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Nov 26 05:16:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505383301_pi300-10000_cl_pass1_src1.csv
[Sat Nov 26 05:16:30 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505383301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505383301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Nov 26 05:16:30 2011] fullrun_mos2_xmm0505383301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Nov 26 05:16:30 2011] fullrun_mos2_xmm0505383301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Nov 26 05:16:30 2011] Fit fullrun_mos2_xmm0505383301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Nov 26 05:16:44 2011] Spatial fit model total counts = 151.474000, observed total counts = 151.000000
[Sat Nov 26 05:16:44 2011] Offset between fit and detection position for source 4 = 0.534657 pixels
[Sat Nov 26 05:16:44 2011] 151.951500 total counts/ 122.494000 bgd. counts: snr = 2.661574
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.534657 pixels
  Position = (321.0, 154.8) = 23 27 21.37 -54 48 29.6
  Extent = 4.6 (2.7-9.9)", rotation angle = 0
  Source counts = 29.5 +/- 12.3
  Background counts = 122.5
  Rate = 0.002 +/- 0.0008
[Sat Nov 26 05:16:44 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 05:16:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 05:16:44 2011] Assessing source extent using major axis lower bound
[Sat Nov 26 05:16:44 2011] Source does appear to be extended
[Sat Nov 26 05:16:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Nov 26 05:51:42 2011] XMMSAS src. selection expression = ellipse(27874.276200, 13417.230800, 275.316608, 275.316608, 0.000000, X, Y)
[Sat Nov 26 05:51:42 2011] Writing source region out to fullrun_mos2_xmm0505383301_pi300-10000_pass1_cl_src4_src.reg
[Sat Nov 26 05:51:42 2011] Extracting stamp from image fullrun_mos2_xmm0505383301_pi300-10000_cl_sm2.00.img.gz, (305, 139) - (337, 171)
[Sat Nov 26 05:51:42 2011] XMMSAS bgd. selection expression = annulus(27874.276200, 13417.230800, 458.861013, 917.722026, X, Y)
[Sat Nov 26 05:51:42 2011] Writing fullrun_mos2_xmm0505383301_pi300-10000_pass1_cl_src4.gif
[Sat Nov 26 05:51:45 2011] Mean detx,y = (-6074.10, -11997.80) 
[Sat Nov 26 05:51:48 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Nov 26 05:52:00 2011] Binned source spectrum to 10 counts/bin
[Sat Nov 26 05:52:01 2011] Setting source spectrum file to fullrun_mos2_xmm0505383301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sat Nov 26 05:52:01 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0505383301_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sat Nov 26 05:53:07 2011] Not generating rmf since there are only 29 counts
[Sat Nov 26 05:53:07 2011] rmf not generated due to insufficient counts
[Sat Nov 26 05:54:05 2011] Updating aperture counts using extracted products
[Sat Nov 26 05:54:05 2011] Error reading totcts from fullrun_mos2_xmm0505383301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sat Nov 26 05:54:06 2011] Calculating source flux in energy range 0.30-8.00
[Sat Nov 26 05:54:06 2011] Using photon index=1.80, rate=0.0018, arf fullrun_mos2_xmm0505383301_pi300-10000_pass1_cl_src4.arf
[Sat Nov 26 05:54:06 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Nov 26 05:54:06 2011] Updating source flux to 5.7e-14
[Sat Nov 26 05:54:08 2011] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Nov 26 05:54:09 2011] xmm0505383301/analysis//spectral/fullrun_mos2_xmm0505383301_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete