[Sat Nov 26 02:56:29 2011] Detection parameters:
  Position = (180.8, 310.0) = 23 28 31.61 -54 37 12.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 133.2 +/- 16.7
  Background counts = 36.4
  Rate = 0.007 +/- 0.0008

[Sat Nov 26 02:56:29 2011] Off-axis axis estimate = 8.57'
[Sat Nov 26 04:04:36 2011] Using EEF radius (= 10.71 ")to estimate initial spatial extent for simple fitting
[Sat Nov 26 04:04:36 2011] Initial guess for spatial extent in simple fitting = 10.71"
[Sat Nov 26 04:04:36 2011] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.025
[Sat Nov 26 04:04:36 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 10.71"
[Sat Nov 26 04:12:31 2011] fullrun_mos2_xmm0505383301_pi300-10000_cl_pass0_src3.ximg exists
[Sat Nov 26 04:12:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505383301_pi300-10000_cl_pass0_src3.csv
[Sat Nov 26 04:12:31 2011] fullrun_mos2_xmm0505383301_pi300-10000_cl_pass0_src3_1.ximg exists
[Sat Nov 26 04:12:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505383301_pi300-10000_cl_pass0_src3.csv
[Sat Nov 26 04:12:31 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505383301_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505383301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Nov 26 04:12:31 2011] fullrun_mos2_xmm0505383301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sat Nov 26 04:12:31 2011] fullrun_mos2_xmm0505383301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Nov 26 04:12:31 2011] Fit fullrun_mos2_xmm0505383301_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sat Nov 26 04:12:43 2011] Spatial fit model total counts = 167.000000, observed total counts = 167.000000
[Sat Nov 26 04:12:43 2011] Offset between fit and detection position for source 1 = 0.110341 pixels
[Sat Nov 26 04:12:43 2011] 167.403500 total counts/ 72.592900 bgd. counts: snr = 11.127813
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.110341 pixels
  Position = (180.8, 310.1) = 23 28 31.60 -54 37 12.9
  Extent = 7.6 (6.4-9.2)", rotation angle = 0
  Source counts = 94.8 +/- 12.9
  Background counts = 72.6
  Rate = 0.006 +/- 0.0008
[Sat Nov 26 04:12:43 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 04:12:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 04:12:43 2011] Assessing source extent using major axis lower bound
[Sat Nov 26 04:12:43 2011] Source does appear to be extended
[Sat Nov 26 04:12:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Nov 26 05:09:54 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Nov 26 05:09:54 2011] Initial guess for spatial extent in simple fitting = 7.61"
[Sat Nov 26 05:09:54 2011] source mask rpix=1.7, npix_max = 20, mask sum = 16, frac = 0.790
[Sat Nov 26 05:09:54 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 7.61"
[Sat Nov 26 05:16:30 2011] fullrun_mos2_xmm0505383301_pi300-10000_cl_pass1_src3.ximg exists
[Sat Nov 26 05:16:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505383301_pi300-10000_cl_pass1_src3.csv
[Sat Nov 26 05:16:30 2011] fullrun_mos2_xmm0505383301_pi300-10000_cl_pass1_src3_1.ximg exists
[Sat Nov 26 05:16:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505383301_pi300-10000_cl_pass1_src3.csv
[Sat Nov 26 05:16:30 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505383301_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505383301_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Nov 26 05:16:30 2011] fullrun_mos2_xmm0505383301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sat Nov 26 05:16:30 2011] fullrun_mos2_xmm0505383301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sat Nov 26 05:16:30 2011] Fit fullrun_mos2_xmm0505383301_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sat Nov 26 05:16:44 2011] Warning, spatial fit 3 centroid is now closest to src. 3
[Sat Nov 26 05:16:44 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 05:16:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 05:16:44 2011] Assessing source extent using major axis lower bound
[Sat Nov 26 05:16:44 2011] Source does appear to be extended
[Sat Nov 26 05:16:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Nov 26 05:51:42 2011] XMMSAS src. selection expression = ellipse(15684.745480, 26933.461400, 456.616213, 456.616213, 0.000000, X, Y)
[Sat Nov 26 05:51:42 2011] Writing source region out to fullrun_mos2_xmm0505383301_pi300-10000_pass1_cl_src1_src.reg
[Sat Nov 26 05:51:42 2011] Extracting stamp from image fullrun_mos2_xmm0505383301_pi300-10000_cl_sm2.00.img.gz, (155, 284) - (207, 336)
[Sat Nov 26 05:51:42 2011] XMMSAS bgd. selection expression = annulus(15684.745480, 26933.461400, 761.027022, 1522.054044, X, Y)
[Sat Nov 26 05:51:42 2011] Writing fullrun_mos2_xmm0505383301_pi300-10000_pass1_cl_src1.gif
[Sat Nov 26 05:52:26 2011] Mean detx,y = (10818.03, -5214.85) 
[Sat Nov 26 05:52:29 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Nov 26 05:52:41 2011] Binned source spectrum to 10 counts/bin
[Sat Nov 26 05:52:41 2011] Setting source spectrum file to fullrun_mos2_xmm0505383301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Nov 26 05:52:41 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0505383301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Nov 26 05:53:13 2011] Not generating rmf since there are only 94 counts
[Sat Nov 26 05:53:13 2011] rmf not generated due to insufficient counts
[Sat Nov 26 05:54:06 2011] Updating aperture counts using extracted products
[Sat Nov 26 05:54:06 2011] Error reading totcts from fullrun_mos2_xmm0505383301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Nov 26 05:54:06 2011] Calculating source flux in energy range 0.30-8.00
[Sat Nov 26 05:54:06 2011] Using photon index=1.80, rate=0.0058, arf fullrun_mos2_xmm0505383301_pi300-10000_pass1_cl_src1.arf
[Sat Nov 26 05:54:06 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Nov 26 05:54:06 2011] Updating source flux to 1.3e-13
[Sat Nov 26 05:54:08 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Nov 26 05:54:09 2011] xmm0505383301/analysis//spectral/fullrun_mos2_xmm0505383301_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete