[Tue Mar 20 04:05:51 2012] Detection parameters:
  Position = (209.5, 141.5) = 23 23 3.42 -54 49 16.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 28.0 +/- 6.6
  Background counts = 3.2
  Rate = 0.003 +/- 0.0006

[Tue Mar 20 04:05:51 2012] Off-axis axis estimate = 13.08'
[Tue Mar 20 04:41:11 2012] Using EEF radius (= 12.97 ")to estimate initial spatial extent for simple fitting
[Tue Mar 20 04:41:11 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Mar 20 04:41:11 2012] Initial guess for spatial extent in simple fitting = 12.97"
[Tue Mar 20 04:41:11 2012] source mask rpix=3.0, npix_max = 48, mask sum = 28, frac = 0.578
[Tue Mar 20 04:41:11 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 12.97"
[Tue Mar 20 05:03:06 2012] fullrun_mos2_xmm0505383101_pi300-10000_cl_pass0_src9.ximg exists
[Tue Mar 20 05:03:06 2012] fullrun_mos2_xmm0505383101_pi300-10000_cl_pass0_src9_1.ximg exists
[Tue Mar 20 05:03:06 2012] Fit fullrun_mos2_xmm0505383101_pi300-10000_cl_pass0_src9 appears to have run properly
[Tue Mar 20 05:03:06 2012] fullrun_mos2_xmm0505383101_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Tue Mar 20 05:03:06 2012] fullrun_mos2_xmm0505383101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Tue Mar 20 05:03:06 2012] Fit fullrun_mos2_xmm0505383101_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Tue Mar 20 05:03:18 2012] Spatial fit model total counts = 43.924400, observed total counts = 40.000000
[Tue Mar 20 05:03:18 2012] Offset between fit and detection position for source 9 = 0.571399 pixels
[Tue Mar 20 05:03:18 2012] 47.483400 total counts/ 20.635600 bgd. counts: snr = 5.910172
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.571399 pixels
  Position = (209.9, 141.1) = 23 23 3.20 -54 49 17.2
  Extent = 6.5 (4.2-8.4)", rotation angle = 0
  Source counts = 26.8 +/- 6.9
  Background counts = 20.6
  Rate = 0.003 +/- 0.0007
[Tue Mar 20 05:03:18 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 05:03:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 05:03:18 2012] Assessing source extent using major axis lower bound
[Tue Mar 20 05:03:18 2012] Source does appear to be extended
[Tue Mar 20 05:03:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 20 05:38:52 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 20 05:38:52 2012] Initial guess for spatial extent in simple fitting = 6.51"
[Tue Mar 20 05:38:52 2012] source mask rpix=1.5, npix_max = 15, mask sum = 12, frac = 0.753
[Tue Mar 20 05:38:52 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 6.51"
[Tue Mar 20 05:53:53 2012] fullrun_mos2_xmm0505383101_pi300-10000_cl_pass1_src9.ximg exists
[Tue Mar 20 05:53:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505383101_pi300-10000_cl_pass1_src9.csv
[Tue Mar 20 05:53:53 2012] fullrun_mos2_xmm0505383101_pi300-10000_cl_pass1_src9_1.ximg exists
[Tue Mar 20 05:53:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505383101_pi300-10000_cl_pass1_src9.csv
[Tue Mar 20 05:53:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505383101_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505383101_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 05:53:53 2012] fullrun_mos2_xmm0505383101_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Tue Mar 20 05:53:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505383101_pi300-10000_cl_pass1_tfrozen_src9.csv
[Tue Mar 20 05:53:53 2012] fullrun_mos2_xmm0505383101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Tue Mar 20 05:53:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505383101_pi300-10000_cl_pass1_tfrozen_src9.csv
[Tue Mar 20 05:53:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505383101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505383101_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 05:53:59 2012] Spatial fit model total counts = 39.885600, observed total counts = 33.000000
[Tue Mar 20 05:53:59 2012] Poor agreement between spatial fit and data for source 9
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Mar 20 05:53:59 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 05:53:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 05:53:59 2012] Assessing source extent using major axis lower bound
[Tue Mar 20 05:53:59 2012] Source does appear to be extended
[Tue Mar 20 05:53:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 20 06:10:03 2012] XMMSAS src. selection expression = ellipse(18211.838800, 12227.004400, 390.361811, 390.361811, 0.000000, X, Y)
[Tue Mar 20 06:10:03 2012] Writing source region out to fullrun_mos2_xmm0505383101_pi300-10000_pass1_cl_src9_src.reg
[Tue Mar 20 06:10:03 2012] Extracting stamp from image fullrun_mos2_xmm0505383101_pi300-10000_cl_sm2.00.img.gz, (187, 119) - (232, 164)
[Tue Mar 20 06:10:03 2012] XMMSAS bgd. selection expression = annulus(18211.838800, 12227.004400, 650.603019, 1301.206037, X, Y) && !ellipse(19172.850400, 12938.822100, 495.933614, 495.933614, 0.000000, X, Y)
[Tue Mar 20 06:10:03 2012] Writing fullrun_mos2_xmm0505383101_pi300-10000_pass1_cl_src9.gif
[Tue Mar 20 06:12:36 2012] Mean detx,y = (-399.12, -17206.88) 
[Tue Mar 20 06:12:38 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Mar 20 06:12:51 2012] Binned source spectrum to 10 counts/bin
[Tue Mar 20 06:12:52 2012] Setting source spectrum file to fullrun_mos2_xmm0505383101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Tue Mar 20 06:12:52 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505383101_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Tue Mar 20 06:13:46 2012] Not generating rmf since there are only 26 counts
[Tue Mar 20 06:13:46 2012] rmf not generated due to insufficient counts
[Tue Mar 20 06:14:12 2012] Updating aperture counts using extracted products
[Tue Mar 20 06:14:12 2012] Error reading totcts from fullrun_mos2_xmm0505383101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Tue Mar 20 06:14:12 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 20 06:14:12 2012] Using photon index=1.80, rate=0.00264, arf fullrun_mos2_xmm0505383101_pi300-10000_pass1_cl_src9.arf
[Tue Mar 20 06:14:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 20 06:14:12 2012] Updating source flux to 1.9e-13
[Tue Mar 20 06:14:14 2012] Flag p found in src. 9 procflags, skipping spectral fitting
[Tue Mar 20 06:14:14 2012] Source 9 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Mar 20 06:14:15 2012] xmm0505383101/analysis//spectral/fullrun_mos2_xmm0505383101_pi300-10000_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete