[Tue Mar 20 04:05:50 2012] Detection parameters:
  Position = (220.3, 149.3) = 23 22 57.94 -54 48 39.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 33.6 +/- 7.5
  Background counts = 3.5
  Rate = 0.003 +/- 0.0007

[Tue Mar 20 04:05:51 2012] Off-axis axis estimate = 12.21'
[Tue Mar 20 04:41:11 2012] Using EEF radius (= 12.53 ")to estimate initial spatial extent for simple fitting
[Tue Mar 20 04:41:11 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Mar 20 04:41:11 2012] Initial guess for spatial extent in simple fitting = 12.53"
[Tue Mar 20 04:41:11 2012] source mask rpix=2.9, npix_max = 45, mask sum = 48, frac = 1.050
[Tue Mar 20 04:41:11 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 12.53"
[Tue Mar 20 05:03:06 2012] fullrun_mos2_xmm0505383101_pi300-10000_cl_pass0_src5.ximg exists
[Tue Mar 20 05:03:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505383101_pi300-10000_cl_pass0_src5.csv
[Tue Mar 20 05:03:06 2012] fullrun_mos2_xmm0505383101_pi300-10000_cl_pass0_src5_1.ximg exists
[Tue Mar 20 05:03:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505383101_pi300-10000_cl_pass0_src5.csv
[Tue Mar 20 05:03:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505383101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505383101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 05:03:06 2012] fullrun_mos2_xmm0505383101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Tue Mar 20 05:03:06 2012] fullrun_mos2_xmm0505383101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Tue Mar 20 05:03:06 2012] Fit fullrun_mos2_xmm0505383101_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Tue Mar 20 05:03:18 2012] Spatial fit model total counts = 73.374100, observed total counts = 67.000000
[Tue Mar 20 05:03:18 2012] Offset between fit and detection position for source 4 = 0.617783 pixels
[Tue Mar 20 05:03:18 2012] 72.469800 total counts/ 48.501400 bgd. counts: snr = 3.441612
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.617783 pixels
  Position = (220.9, 149.3) = 23 22 57.63 -54 48 41.7
  Extent = 6.2 (4.5-10.7)", rotation angle = 0
  Source counts = 24.0 +/- 8.5
  Background counts = 48.5
  Rate = 0.002 +/- 0.0008
[Tue Mar 20 05:03:18 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 05:03:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 05:03:18 2012] Assessing source extent using major axis lower bound
[Tue Mar 20 05:03:18 2012] Source does appear to be extended
[Tue Mar 20 05:03:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 20 05:38:52 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 20 05:38:52 2012] Initial guess for spatial extent in simple fitting = 6.20"
[Tue Mar 20 05:38:52 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.079
[Tue Mar 20 05:38:52 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 6.20"
[Tue Mar 20 05:53:52 2012] fullrun_mos2_xmm0505383101_pi300-10000_cl_pass1_src5.ximg exists
[Tue Mar 20 05:53:53 2012] fullrun_mos2_xmm0505383101_pi300-10000_cl_pass1_src5_1.ximg exists
[Tue Mar 20 05:53:53 2012] Fit fullrun_mos2_xmm0505383101_pi300-10000_cl_pass1_src5 appears to have run properly
[Tue Mar 20 05:53:53 2012] fullrun_mos2_xmm0505383101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Tue Mar 20 05:53:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505383101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Tue Mar 20 05:53:53 2012] fullrun_mos2_xmm0505383101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Tue Mar 20 05:53:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505383101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Tue Mar 20 05:53:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505383101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505383101_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 05:53:59 2012] Warning, spatial fit 5 centroid is now closest to src. 8
[Tue Mar 20 05:53:59 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 05:53:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 05:53:59 2012] Assessing source extent using major axis lower bound
[Tue Mar 20 05:53:59 2012] Source does appear to be extended
[Tue Mar 20 05:53:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 20 06:10:03 2012] XMMSAS src. selection expression = ellipse(19172.850400, 12938.822100, 371.950211, 371.950211, 0.000000, X, Y)
[Tue Mar 20 06:10:03 2012] Writing source region out to fullrun_mos2_xmm0505383101_pi300-10000_pass1_cl_src4_src.reg
[Tue Mar 20 06:10:03 2012] Extracting stamp from image fullrun_mos2_xmm0505383101_pi300-10000_cl_sm2.00.img.gz, (200, 128) - (242, 171)
[Tue Mar 20 06:10:03 2012] XMMSAS bgd. selection expression = annulus(19172.850400, 12938.822100, 619.917018, 1239.834036, X, Y) && !ellipse(18211.838800, 12227.004400, 520.482415, 520.482415, 0.000000, X, Y)
[Tue Mar 20 06:10:03 2012] Writing fullrun_mos2_xmm0505383101_pi300-10000_pass1_cl_src4.gif
[Tue Mar 20 06:11:54 2012] Mean detx,y = (-759.38, -16136.66) 
[Tue Mar 20 06:11:55 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Mar 20 06:12:05 2012] Binned source spectrum to 10 counts/bin
[Tue Mar 20 06:12:05 2012] Setting source spectrum file to fullrun_mos2_xmm0505383101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Tue Mar 20 06:12:05 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505383101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Tue Mar 20 06:13:29 2012] Not generating rmf since there are only 23 counts
[Tue Mar 20 06:13:29 2012] rmf not generated due to insufficient counts
[Tue Mar 20 06:14:11 2012] Updating aperture counts using extracted products
[Tue Mar 20 06:14:12 2012] Error reading totcts from fullrun_mos2_xmm0505383101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Tue Mar 20 06:14:12 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 20 06:14:12 2012] Using photon index=1.80, rate=0.00236, arf fullrun_mos2_xmm0505383101_pi300-10000_pass1_cl_src4.arf
[Tue Mar 20 06:14:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 20 06:14:12 2012] Updating source flux to 7.3e-14
[Tue Mar 20 06:14:14 2012] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Mar 20 06:14:15 2012] xmm0505383101/analysis//spectral/fullrun_mos2_xmm0505383101_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete