[Fri Mar  9 13:53:44 2012] Detection parameters:
  Position = (211.7, 161.4) = 23 20 25.27 -54 47 22.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 31.9 +/- 7.7
  Background counts = 6.5
  Rate = 0.002 +/- 0.0004

[Fri Mar  9 13:53:44 2012] Off-axis axis estimate = 11.76'
[Fri Mar  9 16:08:54 2012] Using EEF radius (= 12.31 ")to estimate initial spatial extent for simple fitting
[Fri Mar  9 16:08:54 2012] Initial guess for spatial extent in simple fitting = 12.31"
[Fri Mar  9 16:08:54 2012] source mask rpix=2.8, npix_max = 44, mask sum = 49, frac = 1.105
[Fri Mar  9 16:08:54 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 12.31"
[Fri Mar  9 16:51:12 2012] fullrun_mos2_xmm0505383001_pi300-10000_cl_pass0_src17.ximg exists
[Fri Mar  9 16:51:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505383001_pi300-10000_cl_pass0_src17.csv
[Fri Mar  9 16:51:12 2012] fullrun_mos2_xmm0505383001_pi300-10000_cl_pass0_src17_1.ximg exists
[Fri Mar  9 16:51:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505383001_pi300-10000_cl_pass0_src17.csv
[Fri Mar  9 16:51:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505383001_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505383001_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 16:51:13 2012] fullrun_mos2_xmm0505383001_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Fri Mar  9 16:51:13 2012] fullrun_mos2_xmm0505383001_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Fri Mar  9 16:51:13 2012] Fit fullrun_mos2_xmm0505383001_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Fri Mar  9 16:51:35 2012] Source 17 is offset by -1.310885 and 4.445188 pixels which is larger than
2 X fitted extent = 1.498101 x 1.498101, not incorporating fit results
[Fri Mar  9 16:51:35 2012] Spatial fit model total counts = 82.963300, observed total counts = 83.000000
[Fri Mar  9 16:51:35 2012] Offset between fit and detection position for source 17 = 0.149124 pixels
[Fri Mar  9 16:51:35 2012] 81.927400 total counts/ 57.680000 bgd. counts: snr = 3.192659
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.149124 pixels
  Position = (211.8, 161.3) = 23 20 25.22 -54 47 23.7
  Extent = 5.6 (4.1-7.2)", rotation angle = 0
  Source counts = 24.2 +/- 9.1
  Background counts = 57.7
  Rate = 0.001 +/- 0.0005
[Fri Mar  9 16:51:35 2012] Vigneting correction estimate = 1.000000
[Fri Mar  9 16:51:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar  9 16:51:35 2012] Assessing source extent using major axis lower bound
[Fri Mar  9 16:51:35 2012] Source does appear to be extended
[Fri Mar  9 16:51:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar  9 18:56:04 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Mar  9 18:56:04 2012] Initial guess for spatial extent in simple fitting = 5.56"
[Fri Mar  9 18:56:04 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.948
[Fri Mar  9 18:56:04 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 5.56"
[Fri Mar  9 19:32:49 2012] fullrun_mos2_xmm0505383001_pi300-10000_cl_pass1_src17.ximg exists
[Fri Mar  9 19:32:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505383001_pi300-10000_cl_pass1_src17.csv
[Fri Mar  9 19:32:49 2012] fullrun_mos2_xmm0505383001_pi300-10000_cl_pass1_src17_1.ximg exists
[Fri Mar  9 19:32:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505383001_pi300-10000_cl_pass1_src17.csv
[Fri Mar  9 19:32:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505383001_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505383001_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 19:32:49 2012] fullrun_mos2_xmm0505383001_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Fri Mar  9 19:32:49 2012] fullrun_mos2_xmm0505383001_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Fri Mar  9 19:32:49 2012] Fit fullrun_mos2_xmm0505383001_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Fri Mar  9 19:33:09 2012] Spatial fit model total counts = 77.474300, observed total counts = 77.000000
[Fri Mar  9 19:33:09 2012] Offset between fit and detection position for source 17 = 0.018493 pixels
[Fri Mar  9 19:33:09 2012] 76.743100 total counts/ 52.726300 bgd. counts: snr = 3.307512
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.018493 pixels
  Position = (211.8, 161.3) = 23 20 25.23 -54 47 23.7
  Extent = 5.5 (4.1-7.3)", rotation angle = 0
  Source counts = 24.0 +/- 8.8
  Background counts = 52.7
  Rate = 0.001 +/- 0.0005
[Fri Mar  9 19:33:09 2012] Vigneting correction estimate = 1.000000
[Fri Mar  9 19:33:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar  9 19:33:09 2012] Assessing source extent using major axis lower bound
[Fri Mar  9 19:33:09 2012] Source does appear to be extended
[Fri Mar  9 19:33:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar  9 20:43:38 2012] XMMSAS src. selection expression = ellipse(18374.480200, 13986.562200, 328.857609, 328.857609, 0.000000, X, Y)
[Fri Mar  9 20:43:38 2012] Writing source region out to fullrun_mos2_xmm0505383001_pi300-10000_pass1_cl_src17_src.reg
[Fri Mar  9 20:43:38 2012] Extracting stamp from image fullrun_mos2_xmm0505383001_pi300-10000_cl_sm2.00.img.gz, (193, 142) - (231, 180)
[Fri Mar  9 20:43:38 2012] XMMSAS bgd. selection expression = annulus(18374.480200, 13986.562200, 548.096016, 1096.192032, X, Y) && !ellipse(17495.314972, 12484.969360, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Mar  9 20:43:38 2012] Writing fullrun_mos2_xmm0505383001_pi300-10000_pass1_cl_src17.gif
[Fri Mar  9 20:47:39 2012] Mean detx,y = (-2516.09, -15257.75) 
[Fri Mar  9 20:47:40 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar  9 20:47:47 2012] Binned source spectrum to 10 counts/bin
[Fri Mar  9 20:47:47 2012] Setting source spectrum file to fullrun_mos2_xmm0505383001_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Fri Mar  9 20:47:47 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505383001_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Fri Mar  9 20:50:20 2012] Not generating rmf since there are only 24 counts
[Fri Mar  9 20:50:20 2012] rmf not generated due to insufficient counts
[Fri Mar  9 20:51:05 2012] Updating aperture counts using extracted products
[Fri Mar  9 20:51:05 2012] Error reading totcts from fullrun_mos2_xmm0505383001_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Fri Mar  9 20:51:05 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar  9 20:51:05 2012] Using photon index=1.80, rate=0.0014, arf fullrun_mos2_xmm0505383001_pi300-10000_pass1_cl_src17.arf
[Fri Mar  9 20:51:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar  9 20:51:05 2012] Updating source flux to 4.6e-14
[Fri Mar  9 20:51:21 2012] Flag b found in src. 17 procflags, skipping spectral fitting
[Fri Mar  9 20:51:21 2012] Source 17 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Mar  9 20:51:22 2012] xmm0505383001/analysis//spectral/fullrun_mos2_xmm0505383001_pi300-10000_pass1_cl_src17_pl.csv not found, spectral fit skipped or did not complete