[Fri Mar  9 13:53:07 2012] Detection parameters:
  Position = (469.2, 290.6) = 23 18 16.08 -54 37 58.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 39.1 +/- 8.6
  Background counts = 7.8
  Rate = 0.002 +/- 0.0005

[Fri Mar  9 13:53:07 2012] Off-axis axis estimate = 12.39'
[Fri Mar  9 15:27:58 2012] Using EEF radius (= 12.62 ")to estimate initial spatial extent for simple fitting
[Fri Mar  9 15:27:58 2012] Initial guess for spatial extent in simple fitting = 12.62"
[Fri Mar  9 15:27:58 2012] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.058
[Fri Mar  9 15:27:58 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 12.62"
[Fri Mar  9 16:08:54 2012] fullrun_mos1_xmm0505383001_pi300-10000_cl_pass0_src14.ximg exists
[Fri Mar  9 16:08:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505383001_pi300-10000_cl_pass0_src14.csv
[Fri Mar  9 16:08:54 2012] fullrun_mos1_xmm0505383001_pi300-10000_cl_pass0_src14_1.ximg exists
[Fri Mar  9 16:08:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505383001_pi300-10000_cl_pass0_src14.csv
[Fri Mar  9 16:08:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505383001_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505383001_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 16:08:54 2012] fullrun_mos1_xmm0505383001_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Fri Mar  9 16:08:54 2012] fullrun_mos1_xmm0505383001_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Fri Mar  9 16:08:54 2012] Fit fullrun_mos1_xmm0505383001_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Fri Mar  9 16:51:29 2012] Spatial fit model total counts = 124.999000, observed total counts = 125.000000
[Fri Mar  9 16:51:29 2012] Offset between fit and detection position for source 13 = 0.265786 pixels
[Fri Mar  9 16:51:29 2012] 123.820200 total counts/ 102.395000 bgd. counts: snr = 2.117315
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.265786 pixels
  Position = (469.0, 290.5) = 23 18 16.18 -54 38 0.5
  Extent = 4.3 (3.2-7.2)", rotation angle = 0
  Source counts = 21.4 +/- 11.1
  Background counts = 102.4
  Rate = 0.001 +/- 0.0006
[Fri Mar  9 16:51:29 2012] Vigneting correction estimate = 1.000000
[Fri Mar  9 16:51:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar  9 16:51:29 2012] Assessing source extent using major axis lower bound
[Fri Mar  9 16:51:29 2012] Source does appear to be extended
[Fri Mar  9 16:51:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar  9 18:21:20 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Mar  9 18:21:20 2012] Initial guess for spatial extent in simple fitting = 4.31"
[Fri Mar  9 18:21:20 2012] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.012
[Fri Mar  9 18:21:20 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 4.31"
[Fri Mar  9 18:56:04 2012] fullrun_mos1_xmm0505383001_pi300-10000_cl_pass1_src13.ximg exists
[Fri Mar  9 18:56:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505383001_pi300-10000_cl_pass1_src13.csv
[Fri Mar  9 18:56:04 2012] fullrun_mos1_xmm0505383001_pi300-10000_cl_pass1_src13_1.ximg exists
[Fri Mar  9 18:56:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505383001_pi300-10000_cl_pass1_src13.csv
[Fri Mar  9 18:56:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505383001_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505383001_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 18:56:04 2012] fullrun_mos1_xmm0505383001_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Fri Mar  9 18:56:04 2012] fullrun_mos1_xmm0505383001_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Fri Mar  9 18:56:04 2012] Fit fullrun_mos1_xmm0505383001_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Fri Mar  9 19:33:03 2012] Spatial fit model total counts = 110.980000, observed total counts = 112.000000
[Fri Mar  9 19:33:03 2012] Offset between fit and detection position for source 13 = 0.322867 pixels
[Fri Mar  9 19:33:03 2012] 110.860600 total counts/ 100.170000 bgd. counts: snr = 1.068152
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.322867 pixels
  Position = (468.8, 290.7) = 23 18 16.26 -54 37 59.3
  Extent = 1.8 (1.1-4.6)", rotation angle = 0
  Source counts = 10.7 +/- 10.5
  Background counts = 100.2
  Rate = 0.0006 +/- 0.0006
  Deleting source due to low Poisson probability