[Mon May  7 10:15:18 2012] Detection parameters:
  Position = (479.8, 331.7) = 23 35 20.22 -54 58 27.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 42.8 +/- 9.1
  Background counts = 8.9
  Rate = 0.005 +/- 0.001

[Mon May  7 10:15:21 2012] Off-axis axis estimate = 13.37'
[Mon May  7 10:18:03 2012] Using EEF radius (= 13.11 ")to estimate initial spatial extent for simple fitting
[Mon May  7 10:18:03 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May  7 10:18:03 2012] Initial guess for spatial extent in simple fitting = 13.11"
[Mon May  7 10:18:03 2012] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.992
[Mon May  7 10:18:03 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 13.11"
[Mon May  7 11:53:31 2012] fullrun_pn_xmm0505382901_pi300-10000_cl_pass0_src13.ximg exists
[Mon May  7 11:53:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505382901_pi300-10000_cl_pass0_src13.csv
[Mon May  7 11:53:31 2012] fullrun_pn_xmm0505382901_pi300-10000_cl_pass0_src13_1.ximg exists
[Mon May  7 11:53:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505382901_pi300-10000_cl_pass0_src13.csv
[Mon May  7 11:53:31 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505382901_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505382901_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  7 11:53:31 2012] fullrun_pn_xmm0505382901_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Mon May  7 11:53:31 2012] fullrun_pn_xmm0505382901_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Mon May  7 11:53:31 2012] Fit fullrun_pn_xmm0505382901_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Mon May  7 13:26:39 2012] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 17.375563 pixels away
[Mon May  7 13:26:39 2012] Vigneting correction estimate = 1.000000
[Mon May  7 13:26:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  7 13:26:39 2012] Assessing source extent using major
[Mon May  7 13:26:39 2012] Source does appear to be extended
[Mon May  7 13:26:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May  7 13:27:10 2012] Using EEF radius (= 13.11 ")to estimate initial spatial extent for simple fitting
[Mon May  7 13:27:10 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May  7 13:27:10 2012] Initial guess for spatial extent in simple fitting = 13.11"
[Mon May  7 13:27:10 2012] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.992
[Mon May  7 13:27:10 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 13.11"
[Mon May  7 14:58:54 2012] fullrun_pn_xmm0505382901_pi300-10000_cl_pass1_src13.ximg exists
[Mon May  7 14:58:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505382901_pi300-10000_cl_pass1_src13.csv
[Mon May  7 14:58:54 2012] fullrun_pn_xmm0505382901_pi300-10000_cl_pass1_src13_1.ximg exists
[Mon May  7 14:58:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505382901_pi300-10000_cl_pass1_src13.csv
[Mon May  7 14:58:54 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505382901_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505382901_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  7 14:58:55 2012] fullrun_pn_xmm0505382901_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Mon May  7 14:58:55 2012] fullrun_pn_xmm0505382901_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Mon May  7 14:58:55 2012] Fit fullrun_pn_xmm0505382901_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Mon May  7 16:26:38 2012] Spatial fit model total counts = 150.608000, observed total counts = 150.000000
[Mon May  7 16:26:38 2012] Offset between fit and detection position for source 13 = 0.480798 pixels
[Mon May  7 16:26:38 2012] 153.161700 total counts/ 120.093000 bgd. counts: snr = 3.017576
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.480798 pixels
  Position = (479.7, 331.2) = 23 35 20.26 -54 58 29.6
  Extent = 7.2 (3.8-11.6)", rotation angle = 0
  Source counts = 33.1 +/- 12.4
  Background counts = 120.1
  Rate = 0.004 +/- 0.001
[Mon May  7 16:26:38 2012] Vigneting correction estimate = 1.000000
[Mon May  7 16:26:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  7 16:26:38 2012] Assessing source extent using major axis lower bound
[Mon May  7 16:26:38 2012] Source does appear to be extended
[Mon May  7 16:26:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May  7 16:27:07 2012] XMMSAS src. selection expression = ellipse(41684.797400, 28765.057000, 429.400212, 429.400212, 0.000000, X, Y)
[Mon May  7 16:27:07 2012] Writing source region out to fullrun_pn_xmm0505382901_pi300-10000_pass1_cl_src13_src.reg
[Mon May  7 16:27:07 2012] Extracting stamp from image fullrun_pn_xmm0505382901_pi300-10000_cl_sm2.00.img.gz, (455, 307) - (504, 356)
[Mon May  7 16:27:07 2012] XMMSAS bgd. selection expression = annulus(41684.797400, 28765.057000, 715.667021, 1431.334041, X, Y)
[Mon May  7 16:27:07 2012] Writing fullrun_pn_xmm0505382901_pi300-10000_pass1_cl_src13.gif
[Mon May  7 16:40:06 2012] Mean detx,y = (12385.00, -7284.60) 
[Mon May  7 16:40:11 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May  7 16:40:43 2012] Binned source spectrum to 10 counts/bin
[Mon May  7 16:40:43 2012] Setting source spectrum file to fullrun_pn_xmm0505382901_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Mon May  7 16:40:43 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505382901_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Mon May  7 17:16:42 2012] Not generating rmf since there are only 33 counts
[Mon May  7 17:16:42 2012] rmf not generated due to insufficient counts
[Mon May  7 17:47:18 2012] Updating aperture counts using extracted products
[Mon May  7 17:47:18 2012] Error reading totcts from fullrun_pn_xmm0505382901_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Mon May  7 17:47:21 2012] Calculating source flux in energy range 0.30-8.00
[Mon May  7 17:47:21 2012] Using photon index=1.80, rate=0.00387, arf fullrun_pn_xmm0505382901_pi300-10000_pass1_cl_src13.arf
[Mon May  7 17:47:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May  7 17:47:22 2012] Updating source flux to 2.3e-14
[Mon May  7 17:47:31 2012] Source 13 has fewer than 100.000000 counts, skipping spectral fitting