[Wed Mar 21 17:13:11 2012] Detection parameters:
  Position = (265.3, 190.6) = 23 34 29.71 -55 8 47.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 39.6 +/- 7.7
  Background counts = 4.0
  Rate = 0.004 +/- 0.0008

[Wed Mar 21 17:13:11 2012] Off-axis axis estimate = 8.18'
[Wed Mar 21 18:15:13 2012] Using EEF radius (= 10.52 ")to estimate initial spatial extent for simple fitting
[Wed Mar 21 18:15:13 2012] Initial guess for spatial extent in simple fitting = 10.52"
[Wed Mar 21 18:15:13 2012] source mask rpix=2.4, npix_max = 34, mask sum = 30, frac = 0.881
[Wed Mar 21 18:15:13 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 10.52"
[Wed Mar 21 18:41:48 2012] fullrun_mos2_xmm0505382801_pi300-10000_cl_pass0_src8.ximg exists
[Wed Mar 21 18:41:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505382801_pi300-10000_cl_pass0_src8.csv
[Wed Mar 21 18:41:48 2012] fullrun_mos2_xmm0505382801_pi300-10000_cl_pass0_src8_1.ximg exists
[Wed Mar 21 18:41:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505382801_pi300-10000_cl_pass0_src8.csv
[Wed Mar 21 18:41:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505382801_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505382801_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 18:41:48 2012] fullrun_mos2_xmm0505382801_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Wed Mar 21 18:41:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505382801_pi300-10000_cl_pass0_tfrozen_src8.csv
[Wed Mar 21 18:41:48 2012] fullrun_mos2_xmm0505382801_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Wed Mar 21 18:41:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505382801_pi300-10000_cl_pass0_tfrozen_src8.csv
[Wed Mar 21 18:41:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505382801_pi300-10000_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505382801_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 18:42:01 2012] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 13.173096 pixels away
[Wed Mar 21 18:42:01 2012] Vigneting correction estimate = 1.000000
[Wed Mar 21 18:42:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 21 18:42:01 2012] Assessing source extent using major
[Wed Mar 21 18:42:01 2012] Source does appear to be extended
[Wed Mar 21 18:42:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 21 19:40:23 2012] Using EEF radius (= 10.52 ")to estimate initial spatial extent for simple fitting
[Wed Mar 21 19:40:23 2012] Initial guess for spatial extent in simple fitting = 10.52"
[Wed Mar 21 19:40:23 2012] source mask rpix=2.4, npix_max = 34, mask sum = 30, frac = 0.881
[Wed Mar 21 19:40:23 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 10.52"
[Wed Mar 21 20:06:50 2012] fullrun_mos2_xmm0505382801_pi300-10000_cl_pass1_src8.ximg exists
[Wed Mar 21 20:06:50 2012] fullrun_mos2_xmm0505382801_pi300-10000_cl_pass1_src8_1.ximg exists
[Wed Mar 21 20:06:50 2012] Fit fullrun_mos2_xmm0505382801_pi300-10000_cl_pass1_src8 appears to have run properly
[Wed Mar 21 20:06:50 2012] fullrun_mos2_xmm0505382801_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Wed Mar 21 20:06:50 2012] fullrun_mos2_xmm0505382801_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Wed Mar 21 20:06:50 2012] Fit fullrun_mos2_xmm0505382801_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Wed Mar 21 20:07:04 2012] Spatial fit model total counts = 72.382000, observed total counts = 69.000000
[Wed Mar 21 20:07:04 2012] Offset between fit and detection position for source 11 = 0.585038 pixels
[Wed Mar 21 20:07:04 2012] 74.615500 total counts/ 57.153400 bgd. counts: snr = 2.309806
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.585038 pixels
  Position = (265.0, 190.1) = 23 34 29.89 -55 8 46.7
  Extent = 2.6" x 2.6", rotation angle = 0
  Source counts = 17.5 +/- 8.6
  Background counts = 57.2
  Rate = 0.002 +/- 0.0008
[Wed Mar 21 20:07:04 2012] Vigneting correction estimate = 1.000000
[Wed Mar 21 20:07:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 21 20:07:04 2012] Assessing source extent using major
[Wed Mar 21 20:07:04 2012] Source does appear to be extended
[Wed Mar 21 20:07:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 21 20:43:53 2012] XMMSAS src. selection expression = ellipse(23003.626300, 16494.252800, 157.761605, 157.761605, 0.000000, X, Y)
[Wed Mar 21 20:43:53 2012] Writing source region out to fullrun_mos2_xmm0505382801_pi300-10000_pass1_cl_src11_src.reg
[Wed Mar 21 20:43:53 2012] Extracting stamp from image fullrun_mos2_xmm0505382801_pi300-10000_cl_sm2.00.img.gz, (256, 181) - (274, 199)
[Wed Mar 21 20:43:53 2012] XMMSAS bgd. selection expression = annulus(23003.626300, 16494.252800, 262.936008, 525.872015, X, Y)
[Wed Mar 21 20:43:53 2012] Writing fullrun_mos2_xmm0505382801_pi300-10000_pass1_cl_src11.gif
[Wed Mar 21 20:47:09 2012] Mean detx,y = (213.78, -11450.30) 
[Wed Mar 21 20:47:11 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 21 20:47:27 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 21 20:47:27 2012] Setting source spectrum file to fullrun_mos2_xmm0505382801_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Wed Mar 21 20:47:27 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505382801_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Wed Mar 21 20:49:36 2012] Not generating rmf since there are only 17 counts
[Wed Mar 21 20:49:36 2012] rmf not generated due to insufficient counts
[Wed Mar 21 20:50:26 2012] Updating aperture counts using extracted products
[Wed Mar 21 20:50:26 2012] Error reading totcts from fullrun_mos2_xmm0505382801_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Wed Mar 21 20:50:26 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 21 20:50:26 2012] Using photon index=1.80, rate=0.00171, arf fullrun_mos2_xmm0505382801_pi300-10000_pass1_cl_src11.arf
[Wed Mar 21 20:50:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 21 20:50:26 2012] Updating source flux to 7.1e-14
[Wed Mar 21 20:50:29 2012] Source 11 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Mar 21 20:50:30 2012] xmm0505382801/analysis//spectral/fullrun_mos2_xmm0505382801_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete