[Wed Dec 28 10:59:02 2011] Detection parameters:
  Position = (472.9, 366.3) = 23 30 6.28 -54 55 53.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 113.9 +/- 17.5
  Background counts = 63.8
  Rate = 0.006 +/- 0.0009

[Wed Dec 28 10:59:03 2011] Off-axis axis estimate = 13.57'
[Wed Dec 28 11:06:09 2011] Using EEF radius (= 13.21 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 11:06:09 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Dec 28 11:06:09 2011] Initial guess for spatial extent in simple fitting = 13.21"
[Wed Dec 28 11:06:09 2011] source mask rpix=3.0, npix_max = 50, mask sum = 49, frac = 0.979
[Wed Dec 28 11:06:09 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 13.21"
[Wed Dec 28 11:30:54 2011] fullrun_pn_xmm0505382701_pi300-10000_cl_pass0_src1.ximg exists
[Wed Dec 28 11:30:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505382701_pi300-10000_cl_pass0_src1.csv
[Wed Dec 28 11:30:54 2011] fullrun_pn_xmm0505382701_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Dec 28 11:30:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505382701_pi300-10000_cl_pass0_src1.csv
[Wed Dec 28 11:30:54 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505382701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505382701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 11:30:55 2011] fullrun_pn_xmm0505382701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Dec 28 11:30:55 2011] fullrun_pn_xmm0505382701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Dec 28 11:30:55 2011] Fit fullrun_pn_xmm0505382701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Dec 28 11:58:48 2011] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 18.335230 pixels away
[Wed Dec 28 11:58:48 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 11:58:48 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 11:58:48 2011] Assessing source extent using major
[Wed Dec 28 11:58:48 2011] Source does appear to be extended
[Wed Dec 28 11:58:48 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 11:59:06 2011] Using EEF radius (= 13.21 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 11:59:06 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Dec 28 11:59:06 2011] Initial guess for spatial extent in simple fitting = 13.21"
[Wed Dec 28 11:59:06 2011] source mask rpix=3.0, npix_max = 50, mask sum = 49, frac = 0.979
[Wed Dec 28 11:59:06 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 13.21"
[Wed Dec 28 12:23:16 2011] fullrun_pn_xmm0505382701_pi300-10000_cl_pass1_src1.ximg exists
[Wed Dec 28 12:23:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505382701_pi300-10000_cl_pass1_src1.csv
[Wed Dec 28 12:23:16 2011] fullrun_pn_xmm0505382701_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Dec 28 12:23:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505382701_pi300-10000_cl_pass1_src1.csv
[Wed Dec 28 12:23:16 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505382701_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505382701_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 12:23:16 2011] fullrun_pn_xmm0505382701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Dec 28 12:23:16 2011] fullrun_pn_xmm0505382701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Dec 28 12:23:16 2011] Fit fullrun_pn_xmm0505382701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Dec 28 12:47:56 2011] Spatial fit model total counts = 419.998000, observed total counts = 420.000000
[Wed Dec 28 12:47:56 2011] Offset between fit and detection position for source 1 = 0.563591 pixels
[Wed Dec 28 12:47:56 2011] 417.154000 total counts/ 353.106000 bgd. counts: snr = 3.408419
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.563591 pixels
  Position = (472.7, 366.8) = 23 30 6.38 -54 55 51.6
  Extent = 8.5 (5.5-14.5)", rotation angle = 0
  Source counts = 64.0 +/- 20.4
  Background counts = 353.1
  Rate = 0.006 +/- 0.002
[Wed Dec 28 12:47:56 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 12:47:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 12:47:56 2011] Assessing source extent using major axis lower bound
[Wed Dec 28 12:47:56 2011] Source does appear to be extended
[Wed Dec 28 12:47:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 12:48:11 2011] XMMSAS src. selection expression = ellipse(41077.665620, 31864.781600, 511.350015, 511.350015, 0.000000, X, Y)
[Wed Dec 28 12:48:11 2011] Writing source region out to fullrun_pn_xmm0505382701_pi300-10000_pass1_cl_src1_src.reg
[Wed Dec 28 12:48:11 2011] Extracting stamp from image fullrun_pn_xmm0505382701_pi300-10000_cl_sm2.00.img.gz, (443, 337) - (502, 396)
[Wed Dec 28 12:48:11 2011] XMMSAS bgd. selection expression = annulus(41077.665620, 31864.781600, 852.250025, 1704.500049, X, Y)
[Wed Dec 28 12:48:11 2011] Writing fullrun_pn_xmm0505382701_pi300-10000_pass1_cl_src1.gif
[Wed Dec 28 12:48:30 2011] Mean detx,y = (9569.19, -10851.71) 
[Wed Dec 28 12:48:37 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Dec 28 12:49:54 2011] Binned source spectrum to 10 counts/bin
[Wed Dec 28 12:49:55 2011] Setting source spectrum file to fullrun_pn_xmm0505382701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Dec 28 12:49:55 2011] Setting bgd. spectrum file to fullrun_pn_xmm0505382701_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Dec 28 12:57:41 2011] Not generating rmf since there are only 64 counts
[Wed Dec 28 12:57:41 2011] rmf not generated due to insufficient counts
[Wed Dec 28 13:18:57 2011] Updating aperture counts using extracted products
[Wed Dec 28 13:18:58 2011] Error reading totcts from fullrun_pn_xmm0505382701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Dec 28 13:19:01 2011] Calculating source flux in energy range 0.30-8.00
[Wed Dec 28 13:19:01 2011] Using photon index=1.80, rate=0.00629, arf fullrun_pn_xmm0505382701_pi300-10000_pass1_cl_src1.arf
[Wed Dec 28 13:19:01 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Dec 28 13:19:01 2011] Updating source flux to 3.9e-14
[Wed Dec 28 13:19:32 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Dec 28 13:19:33 2011] xmm0505382701/analysis//spectral/fullrun_pn_xmm0505382701_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete