[Thu Feb 23 10:28:55 2012] Detection parameters:
  Position = (166.7, 221.1) = 23 30 2.00 -55 6 23.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4050.9 +/- 75.0
  Background counts = 15.9
  Rate = 0.4 +/- 0.007

[Thu Feb 23 10:28:56 2012] Off-axis axis estimate = 11.08'
[Thu Feb 23 10:31:33 2012] Using EEF radius (= 11.97 ")to estimate initial spatial extent for simple fitting
[Thu Feb 23 10:31:33 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Feb 23 10:31:33 2012] Initial guess for spatial extent in simple fitting = 11.97"
[Thu Feb 23 10:31:33 2012] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.993
[Thu Feb 23 10:31:33 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.97"
[Thu Feb 23 11:22:26 2012] fullrun_pn_xmm0505382601_pi300-10000_cl_pass0_src1.ximg exists
[Thu Feb 23 11:22:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505382601_pi300-10000_cl_pass0_src1.csv
[Thu Feb 23 11:22:26 2012] fullrun_pn_xmm0505382601_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Feb 23 11:22:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505382601_pi300-10000_cl_pass0_src1.csv
[Thu Feb 23 11:22:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505382601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505382601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 23 11:22:26 2012] fullrun_pn_xmm0505382601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Feb 23 11:22:26 2012] fullrun_pn_xmm0505382601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Feb 23 11:22:26 2012] Fit fullrun_pn_xmm0505382601_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Feb 23 12:15:59 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 14.403537 pixels away
[Thu Feb 23 12:15:59 2012] Vigneting correction estimate = 1.000000
[Thu Feb 23 12:15:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 23 12:15:59 2012] Assessing source extent using major
[Thu Feb 23 12:15:59 2012] Source does appear to be extended
[Thu Feb 23 12:15:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 23 12:16:22 2012] Using EEF radius (= 11.97 ")to estimate initial spatial extent for simple fitting
[Thu Feb 23 12:16:22 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Feb 23 12:16:22 2012] Initial guess for spatial extent in simple fitting = 11.97"
[Thu Feb 23 12:16:22 2012] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.993
[Thu Feb 23 12:16:22 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 11.97"
[Thu Feb 23 13:06:01 2012] fullrun_pn_xmm0505382601_pi300-10000_cl_pass1_src1.ximg exists
[Thu Feb 23 13:06:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505382601_pi300-10000_cl_pass1_src1.csv
[Thu Feb 23 13:06:01 2012] fullrun_pn_xmm0505382601_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Feb 23 13:06:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505382601_pi300-10000_cl_pass1_src1.csv
[Thu Feb 23 13:06:01 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505382601_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505382601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 23 13:06:01 2012] fullrun_pn_xmm0505382601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Feb 23 13:06:01 2012] fullrun_pn_xmm0505382601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Feb 23 13:06:01 2012] Fit fullrun_pn_xmm0505382601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Feb 23 14:05:47 2012] Spatial fit model total counts = 4108.000000, observed total counts = 4108.000000
[Thu Feb 23 14:05:47 2012] Offset between fit and detection position for source 1 = 0.282531 pixels
[Thu Feb 23 14:05:47 2012] 4125.869000 total counts/ 850.759000 bgd. counts: snr = 112.285225
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.282531 pixels
  Position = (166.9, 221.3) = 23 30 1.91 -55 6 23.5
  Extent = 7.7 (7.5-7.9)", rotation angle = 0
  Source counts = 3275.1 +/- 64.2
  Background counts = 850.8
  Rate = 0.3 +/- 0.006
[Thu Feb 23 14:05:47 2012] Vigneting correction estimate = 1.000000
[Thu Feb 23 14:05:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 23 14:05:47 2012] Assessing source extent using major axis lower bound
[Thu Feb 23 14:05:47 2012] Source does appear to be extended
[Thu Feb 23 14:05:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 23 14:06:09 2012] Counts = 3275.110000, rescaling region sizes by 2.000000
[Thu Feb 23 14:06:09 2012] XMMSAS src. selection expression = ellipse(14468.242800, 19204.102800, 918.260426, 918.260426, 0.000000, X, Y)
[Thu Feb 23 14:06:09 2012] Writing source region out to fullrun_pn_xmm0505382601_pi300-10000_pass1_cl_src1_src.reg
[Thu Feb 23 14:06:09 2012] Extracting stamp from image fullrun_pn_xmm0505382601_pi300-10000_cl_sm2.00.img.gz, (114, 169) - (220, 274)
[Thu Feb 23 14:06:09 2012] XMMSAS bgd. selection expression = annulus(14468.242800, 19204.102800, 3060.868088, 6121.736176, X, Y) && !ellipse(19901.737946, 18560.369354, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17965.866700, 22853.966600, 368.544811, 368.544811, 0.000000, X, Y)
[Thu Feb 23 14:06:09 2012] Writing fullrun_pn_xmm0505382601_pi300-10000_pass1_cl_src1.gif
[Thu Feb 23 14:06:22 2012] Mean detx,y = (-8171.23, 12671.73) 
[Thu Feb 23 14:06:28 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb 23 14:09:06 2012] Binned source spectrum to 10 counts/bin
[Thu Feb 23 14:09:06 2012] Setting source spectrum file to fullrun_pn_xmm0505382601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Feb 23 14:09:06 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505382601_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Feb 23 15:07:39 2012] Updating aperture counts using extracted products
[Thu Feb 23 15:07:39 2012] Error reading totcts from fullrun_pn_xmm0505382601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Feb 23 15:07:41 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 23 15:07:41 2012] Using photon index=1.80, rate=0.3, arf fullrun_pn_xmm0505382601_pi300-10000_pass1_cl_src1.arf
[Thu Feb 23 15:07:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb 23 15:07:41 2012] Updating source flux to 2.1e-12
[Thu Feb 23 15:08:43 2012] Reading fit data from xmm0505382601/analysis//spectral/fullrun_pn_xmm0505382601_pi300-10000_pass1_cl_src1_pl.csv
[Thu Feb 23 15:08:43 2012] Spectral fit parameter nH value = 1.92622e+14
[Thu Feb 23 15:08:43 2012] Spectral fit parameter PhoIndex value = 2.06949
[Thu Feb 23 15:08:43 2012] Failed to get F(0.3-8.0) from xmm0505382601/analysis//spectral/fullrun_pn_xmm0505382601_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Feb 23 15:08:43 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 23 15:08:43 2012] Using Nh = 1.9e+14, photon index=2.07, rate=0.3, arf fullrun_pn_xmm0505382601_pi300-10000_pass1_cl_src1.arf
[Thu Feb 23 15:08:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb 23 15:08:43 2012] Updating source flux to 1.7e-12