[Tue Mar 27 10:25:19 2012] Detection parameters:
  Position = (139.3, 353.1) = 23 27 36.94 -54 56 45.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 70.1 +/- 11.0
  Background counts = 6.3
  Rate = 0.003 +/- 0.0005

[Tue Mar 27 10:25:20 2012] Off-axis axis estimate = 12.20'
[Tue Mar 27 11:59:47 2012] Using EEF radius (= 12.53 ")to estimate initial spatial extent for simple fitting
[Tue Mar 27 11:59:47 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Mar 27 11:59:47 2012] Initial guess for spatial extent in simple fitting = 12.53"
[Tue Mar 27 11:59:47 2012] source mask rpix=2.9, npix_max = 45, mask sum = 43, frac = 0.941
[Tue Mar 27 11:59:47 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 12.53"
[Tue Mar 27 12:51:12 2012] fullrun_mos1_xmm0505382501_pi300-10000_cl_pass0_src15.ximg exists
[Tue Mar 27 12:51:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505382501_pi300-10000_cl_pass0_src15.csv
[Tue Mar 27 12:51:12 2012] fullrun_mos1_xmm0505382501_pi300-10000_cl_pass0_src15_1.ximg exists
[Tue Mar 27 12:51:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505382501_pi300-10000_cl_pass0_src15.csv
[Tue Mar 27 12:51:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505382501_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505382501_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 12:51:12 2012] fullrun_mos1_xmm0505382501_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Tue Mar 27 12:51:12 2012] fullrun_mos1_xmm0505382501_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Tue Mar 27 12:51:12 2012] Fit fullrun_mos1_xmm0505382501_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Tue Mar 27 13:59:49 2012] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 17.089628 pixels away
[Tue Mar 27 13:59:49 2012] Vigneting correction estimate = 1.000000
[Tue Mar 27 13:59:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 27 13:59:49 2012] Assessing source extent using major
[Tue Mar 27 13:59:49 2012] Source does appear to be extended
[Tue Mar 27 13:59:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 27 15:20:59 2012] Using EEF radius (= 12.53 ")to estimate initial spatial extent for simple fitting
[Tue Mar 27 15:20:59 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Mar 27 15:20:59 2012] Initial guess for spatial extent in simple fitting = 12.53"
[Tue Mar 27 15:20:59 2012] source mask rpix=2.9, npix_max = 45, mask sum = 43, frac = 0.941
[Tue Mar 27 15:20:59 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 12.53"
[Tue Mar 27 16:11:55 2012] fullrun_mos1_xmm0505382501_pi300-10000_cl_pass1_src15.ximg exists
[Tue Mar 27 16:11:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505382501_pi300-10000_cl_pass1_src15.csv
[Tue Mar 27 16:11:55 2012] fullrun_mos1_xmm0505382501_pi300-10000_cl_pass1_src15_1.ximg exists
[Tue Mar 27 16:11:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505382501_pi300-10000_cl_pass1_src15.csv
[Tue Mar 27 16:11:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505382501_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505382501_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 16:11:55 2012] fullrun_mos1_xmm0505382501_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Tue Mar 27 16:11:55 2012] fullrun_mos1_xmm0505382501_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Tue Mar 27 16:11:55 2012] Fit fullrun_mos1_xmm0505382501_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Tue Mar 27 17:10:46 2012] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 17.089628 pixels away
[Tue Mar 27 17:10:46 2012] Vigneting correction estimate = 1.000000
[Tue Mar 27 17:10:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 27 17:10:47 2012] Assessing source extent using major
[Tue Mar 27 17:10:47 2012] Source does appear to be extended
[Tue Mar 27 17:10:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 27 18:13:19 2012] XMMSAS src. selection expression = ellipse(12067.854965, 30675.276001, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Mar 27 18:13:19 2012] Writing source region out to fullrun_mos1_xmm0505382501_pi300-10000_pass1_cl_src1_src.reg
[Tue Mar 27 18:13:19 2012] Extracting stamp from image fullrun_mos1_xmm0505382501_pi300-10000_cl_sm2.00.img.gz, (102, 316) - (177, 391)
[Tue Mar 27 18:13:19 2012] XMMSAS bgd. selection expression = annulus(12067.854965, 30675.276001, 1087.500000, 2175.000000, X, Y)
[Tue Mar 27 18:13:19 2012] Writing fullrun_mos1_xmm0505382501_pi300-10000_pass1_cl_src1.gif
[Tue Mar 27 18:18:25 2012] Mean detx,y = (-4561.84, -15638.24) 
[Tue Mar 27 18:18:27 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Mar 27 18:18:48 2012] Binned source spectrum to 10 counts/bin
[Tue Mar 27 18:18:48 2012] Setting source spectrum file to fullrun_mos1_xmm0505382501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Mar 27 18:18:48 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505382501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Mar 27 18:32:40 2012] Not generating rmf since there are only 70 counts
[Tue Mar 27 18:32:40 2012] rmf not generated due to insufficient counts
[Tue Mar 27 19:02:19 2012] Updating aperture counts using extracted products
[Tue Mar 27 19:02:19 2012] Error reading totcts from fullrun_mos1_xmm0505382501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Mar 27 19:02:21 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 27 19:02:21 2012] Using photon index=1.80, rate=0.0032, arf fullrun_mos1_xmm0505382501_pi300-10000_pass1_cl_src1.arf
[Tue Mar 27 19:02:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 27 19:02:21 2012] Updating source flux to 1.1e-13
[Tue Mar 27 19:02:26 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting