[Thu Dec 22 22:35:54 2011] Detection parameters:
  Position = (432.0, 331.0) = 23 22 30.31 -54 58 14.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 33.3 +/- 7.6
  Background counts = 4.8
  Rate = 0.006 +/- 0.001

[Thu Dec 22 22:35:56 2011] Off-axis axis estimate = 9.97'
[Fri Dec 23 00:19:13 2011] Using EEF radius (= 11.41 ")to estimate initial spatial extent for simple fitting
[Fri Dec 23 00:19:13 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Dec 23 00:19:13 2011] Initial guess for spatial extent in simple fitting = 11.41"
[Fri Dec 23 00:19:13 2011] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.922
[Fri Dec 23 00:19:13 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 11.41"
[Fri Dec 23 00:56:59 2011] fullrun_mos2_xmm0505382401_pi300-10000_cl_pass0_src3.ximg exists
[Fri Dec 23 00:56:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505382401_pi300-10000_cl_pass0_src3.csv
[Fri Dec 23 00:56:59 2011] fullrun_mos2_xmm0505382401_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Dec 23 00:56:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505382401_pi300-10000_cl_pass0_src3.csv
[Fri Dec 23 00:56:59 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505382401_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505382401_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 23 00:56:59 2011] fullrun_mos2_xmm0505382401_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Dec 23 00:56:59 2011] fullrun_mos2_xmm0505382401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Dec 23 00:56:59 2011] Fit fullrun_mos2_xmm0505382401_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Dec 23 00:57:17 2011] Spatial fit model total counts = 86.996800, observed total counts = 87.000000
[Fri Dec 23 00:57:17 2011] Offset between fit and detection position for source 7 = 0.277958 pixels
[Fri Dec 23 00:57:17 2011] 90.220100 total counts/ 70.095500 bgd. counts: snr = 2.403711
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.277958 pixels
  Position = (431.9, 330.8) = 23 22 30.40 -54 58 13.6
  Extent = 4.8 (3.4-8.8)", rotation angle = 0
  Source counts = 20.1 +/- 9.5
  Background counts = 70.1
  Rate = 0.002 +/- 0.0009
[Fri Dec 23 00:57:17 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 00:57:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 00:57:17 2011] Assessing source extent using major axis lower bound
[Fri Dec 23 00:57:17 2011] Source does appear to be extended
[Fri Dec 23 00:57:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 23 02:37:17 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Dec 23 02:37:17 2011] Initial guess for spatial extent in simple fitting = 4.76"
[Fri Dec 23 02:37:17 2011] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.885
[Fri Dec 23 02:37:17 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 4.76"
[Fri Dec 23 03:11:45 2011] fullrun_mos2_xmm0505382401_pi300-10000_cl_pass1_src3.ximg exists
[Fri Dec 23 03:11:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505382401_pi300-10000_cl_pass1_src3.csv
[Fri Dec 23 03:11:45 2011] fullrun_mos2_xmm0505382401_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Dec 23 03:11:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505382401_pi300-10000_cl_pass1_src3.csv
[Fri Dec 23 03:11:45 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505382401_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505382401_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 23 03:11:45 2011] fullrun_mos2_xmm0505382401_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Dec 23 03:11:45 2011] fullrun_mos2_xmm0505382401_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Dec 23 03:11:45 2011] Fit fullrun_mos2_xmm0505382401_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Dec 23 03:12:05 2011] Warning, spatial fit 3 centroid is now closest to src. 10
[Fri Dec 23 03:12:05 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 03:12:05 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 03:12:05 2011] Assessing source extent using major axis lower bound
[Fri Dec 23 03:12:05 2011] Source does appear to be extended
[Fri Dec 23 03:12:05 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 23 03:50:48 2011] XMMSAS src. selection expression = ellipse(37525.241280, 28730.662200, 285.678608, 285.678608, 0.000000, X, Y)
[Fri Dec 23 03:50:48 2011] Writing source region out to fullrun_mos2_xmm0505382401_pi300-10000_pass1_cl_src7_src.reg
[Fri Dec 23 03:50:48 2011] Extracting stamp from image fullrun_mos2_xmm0505382401_pi300-10000_cl_sm2.00.img.gz, (415, 314) - (448, 347)
[Fri Dec 23 03:50:48 2011] XMMSAS bgd. selection expression = annulus(37525.241280, 28730.662200, 476.131014, 952.262027, X, Y)
[Fri Dec 23 03:50:48 2011] Writing fullrun_mos2_xmm0505382401_pi300-10000_pass1_cl_src7.gif
[Fri Dec 23 03:52:29 2011] Mean detx,y = (-6632.03, 7388.73) 
[Fri Dec 23 03:52:33 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec 23 03:53:04 2011] Binned source spectrum to 10 counts/bin
[Fri Dec 23 03:53:04 2011] Setting source spectrum file to fullrun_mos2_xmm0505382401_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Fri Dec 23 03:53:04 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0505382401_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Fri Dec 23 03:58:10 2011] Not generating rmf since there are only 20 counts
[Fri Dec 23 03:58:10 2011] rmf not generated due to insufficient counts
[Fri Dec 23 03:59:31 2011] Updating aperture counts using extracted products
[Fri Dec 23 03:59:31 2011] Error reading totcts from fullrun_mos2_xmm0505382401_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Fri Dec 23 03:59:33 2011] Calculating source flux in energy range 0.30-8.00
[Fri Dec 23 03:59:33 2011] Using photon index=1.80, rate=0.00197, arf fullrun_mos2_xmm0505382401_pi300-10000_pass1_cl_src7.arf
[Fri Dec 23 03:59:33 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Dec 23 03:59:33 2011] Updating source flux to 5.2e-14
[Fri Dec 23 03:59:37 2011] Source 7 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Dec 23 03:59:38 2011] xmm0505382401/analysis//spectral/fullrun_mos2_xmm0505382401_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete