[Thu Dec 22 22:35:54 2011] Detection parameters:
  Position = (396.3, 371.8) = 23 22 48.42 -54 55 16.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 45.7 +/- 8.9
  Background counts = 5.7
  Rate = 0.008 +/- 0.002

[Thu Dec 22 22:35:56 2011] Off-axis axis estimate = 8.87'
[Fri Dec 23 00:19:13 2011] Using EEF radius (= 10.86 ")to estimate initial spatial extent for simple fitting
[Fri Dec 23 00:19:13 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Dec 23 00:19:13 2011] Initial guess for spatial extent in simple fitting = 10.86"
[Fri Dec 23 00:19:13 2011] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.002
[Fri Dec 23 00:19:13 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 10.86"
[Fri Dec 23 00:56:59 2011] fullrun_mos2_xmm0505382401_pi300-10000_cl_pass0_src2.ximg exists
[Fri Dec 23 00:56:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505382401_pi300-10000_cl_pass0_src2.csv
[Fri Dec 23 00:56:59 2011] fullrun_mos2_xmm0505382401_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri Dec 23 00:56:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505382401_pi300-10000_cl_pass0_src2.csv
[Fri Dec 23 00:56:59 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505382401_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505382401_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 23 00:56:59 2011] fullrun_mos2_xmm0505382401_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri Dec 23 00:56:59 2011] fullrun_mos2_xmm0505382401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Dec 23 00:56:59 2011] Fit fullrun_mos2_xmm0505382401_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Fri Dec 23 00:57:17 2011] Spatial fit model total counts = 113.998000, observed total counts = 114.000000
[Fri Dec 23 00:57:17 2011] Offset between fit and detection position for source 6 = 0.305741 pixels
[Fri Dec 23 00:57:17 2011] 114.032200 total counts/ 85.914100 bgd. counts: snr = 3.033568
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.305741 pixels
  Position = (396.0, 371.8) = 23 22 48.58 -54 55 15.7
  Extent = 4.2 (3.2-6.1)", rotation angle = 0
  Source counts = 28.1 +/- 10.7
  Background counts = 85.9
  Rate = 0.003 +/- 0.001
[Fri Dec 23 00:57:17 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 00:57:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 00:57:17 2011] Assessing source extent using major axis lower bound
[Fri Dec 23 00:57:17 2011] Source does appear to be extended
[Fri Dec 23 00:57:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 23 02:37:17 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Dec 23 02:37:17 2011] Initial guess for spatial extent in simple fitting = 4.19"
[Fri Dec 23 02:37:17 2011] source mask rpix=1.0, npix_max = 8, mask sum = 6, frac = 0.700
[Fri Dec 23 02:37:17 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 4.19"
[Fri Dec 23 03:11:45 2011] fullrun_mos2_xmm0505382401_pi300-10000_cl_pass1_src2.ximg exists
[Fri Dec 23 03:11:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505382401_pi300-10000_cl_pass1_src2.csv
[Fri Dec 23 03:11:45 2011] fullrun_mos2_xmm0505382401_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri Dec 23 03:11:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505382401_pi300-10000_cl_pass1_src2.csv
[Fri Dec 23 03:11:45 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505382401_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505382401_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 23 03:11:45 2011] fullrun_mos2_xmm0505382401_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri Dec 23 03:11:45 2011] fullrun_mos2_xmm0505382401_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Dec 23 03:11:45 2011] Fit fullrun_mos2_xmm0505382401_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Fri Dec 23 03:12:05 2011] Spatial fit model total counts = 112.768000, observed total counts = 114.000000
[Fri Dec 23 03:12:05 2011] Offset between fit and detection position for source 6 = 0.021665 pixels
[Fri Dec 23 03:12:05 2011] 113.712300 total counts/ 86.877600 bgd. counts: snr = 2.879008
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.021665 pixels
  Position = (396.0, 371.8) = 23 22 48.59 -54 55 15.7
  Extent = 4.2 (3.2-6.0)", rotation angle = 0
  Source counts = 26.8 +/- 10.7
  Background counts = 86.9
  Rate = 0.003 +/- 0.001
[Fri Dec 23 03:12:05 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 03:12:05 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 03:12:05 2011] Assessing source extent using major axis lower bound
[Fri Dec 23 03:12:05 2011] Source does appear to be extended
[Fri Dec 23 03:12:05 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 23 03:50:48 2011] XMMSAS src. selection expression = ellipse(34403.190230, 32299.433560, 254.287807, 254.287807, 0.000000, X, Y)
[Fri Dec 23 03:50:48 2011] Writing source region out to fullrun_mos2_xmm0505382401_pi300-10000_pass1_cl_src6_src.reg
[Fri Dec 23 03:50:48 2011] Extracting stamp from image fullrun_mos2_xmm0505382401_pi300-10000_cl_sm2.00.img.gz, (381, 357) - (411, 386)
[Fri Dec 23 03:50:48 2011] XMMSAS bgd. selection expression = annulus(34403.190230, 32299.433560, 423.813012, 847.626024, X, Y)
[Fri Dec 23 03:50:48 2011] Writing fullrun_mos2_xmm0505382401_pi300-10000_pass1_cl_src6.gif
[Fri Dec 23 03:51:58 2011] Mean detx,y = (-2025.78, 8491.78) 
[Fri Dec 23 03:52:02 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec 23 03:52:22 2011] Binned source spectrum to 10 counts/bin
[Fri Dec 23 03:52:23 2011] Setting source spectrum file to fullrun_mos2_xmm0505382401_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Fri Dec 23 03:52:23 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0505382401_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Fri Dec 23 03:58:05 2011] Not generating rmf since there are only 26 counts
[Fri Dec 23 03:58:05 2011] rmf not generated due to insufficient counts
[Fri Dec 23 03:59:31 2011] Updating aperture counts using extracted products
[Fri Dec 23 03:59:31 2011] Error reading totcts from fullrun_mos2_xmm0505382401_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Fri Dec 23 03:59:33 2011] Calculating source flux in energy range 0.30-8.00
[Fri Dec 23 03:59:33 2011] Using photon index=1.80, rate=0.00263, arf fullrun_mos2_xmm0505382401_pi300-10000_pass1_cl_src6.arf
[Fri Dec 23 03:59:33 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Dec 23 03:59:33 2011] Updating source flux to 6e-14
[Fri Dec 23 03:59:37 2011] Source 6 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Dec 23 03:59:38 2011] xmm0505382401/analysis//spectral/fullrun_mos2_xmm0505382401_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete