[Thu Dec 22 22:35:23 2011] Detection parameters:
  Position = (368.4, 453.2) = 23 23 2.58 -54 49 21.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 35.9 +/- 7.9
  Background counts = 3.9
  Rate = 0.004 +/- 0.0008

[Thu Dec 22 22:35:24 2011] Off-axis axis estimate = 12.31'
[Thu Dec 22 23:36:16 2011] Using EEF radius (= 12.58 ")to estimate initial spatial extent for simple fitting
[Thu Dec 22 23:36:16 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Dec 22 23:36:16 2011] Initial guess for spatial extent in simple fitting = 12.58"
[Thu Dec 22 23:36:16 2011] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.064
[Thu Dec 22 23:36:16 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 12.58"
[Fri Dec 23 00:19:13 2011] fullrun_mos1_xmm0505382401_pi300-10000_cl_pass0_src5.ximg exists
[Fri Dec 23 00:19:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505382401_pi300-10000_cl_pass0_src5.csv
[Fri Dec 23 00:19:13 2011] fullrun_mos1_xmm0505382401_pi300-10000_cl_pass0_src5_1.ximg exists
[Fri Dec 23 00:19:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505382401_pi300-10000_cl_pass0_src5.csv
[Fri Dec 23 00:19:13 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505382401_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505382401_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 23 00:19:13 2011] fullrun_mos1_xmm0505382401_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Fri Dec 23 00:19:13 2011] fullrun_mos1_xmm0505382401_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Fri Dec 23 00:19:13 2011] Fit fullrun_mos1_xmm0505382401_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Fri Dec 23 00:57:13 2011] Spatial fit model total counts = 84.477600, observed total counts = 86.000000
[Fri Dec 23 00:57:13 2011] Offset between fit and detection position for source 3 = 0.840385 pixels
[Fri Dec 23 00:57:13 2011] 85.678700 total counts/ 49.302600 bgd. counts: snr = 5.180614
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.840385 pixels
  Position = (367.7, 453.5) = 23 23 2.96 -54 49 20.5
  Extent = 9.7 (5.8-12.5)", rotation angle = 0
  Source counts = 36.4 +/- 9.3
  Background counts = 49.3
  Rate = 0.004 +/- 0.0009
[Fri Dec 23 00:57:13 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 00:57:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 00:57:13 2011] Assessing source extent using major axis lower bound
[Fri Dec 23 00:57:13 2011] Source does appear to be extended
[Fri Dec 23 00:57:13 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 23 01:58:31 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Dec 23 01:58:31 2011] Initial guess for spatial extent in simple fitting = 9.72"
[Fri Dec 23 01:58:31 2011] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.836
[Fri Dec 23 01:58:31 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 9.72"
[Fri Dec 23 02:37:17 2011] fullrun_mos1_xmm0505382401_pi300-10000_cl_pass1_src5.ximg exists
[Fri Dec 23 02:37:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505382401_pi300-10000_cl_pass1_src5.csv
[Fri Dec 23 02:37:17 2011] fullrun_mos1_xmm0505382401_pi300-10000_cl_pass1_src5_1.ximg exists
[Fri Dec 23 02:37:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505382401_pi300-10000_cl_pass1_src5.csv
[Fri Dec 23 02:37:17 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505382401_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505382401_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 23 02:37:17 2011] fullrun_mos1_xmm0505382401_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Fri Dec 23 02:37:17 2011] fullrun_mos1_xmm0505382401_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Fri Dec 23 02:37:17 2011] Fit fullrun_mos1_xmm0505382401_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Fri Dec 23 03:11:59 2011] Warning, spatial fit 5 centroid is now closest to src. 8
[Fri Dec 23 03:11:59 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 03:11:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 03:11:59 2011] Assessing source extent using major axis lower bound
[Fri Dec 23 03:11:59 2011] Source does appear to be extended
[Fri Dec 23 03:11:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 23 03:45:08 2011] XMMSAS src. selection expression = ellipse(31940.695800, 39408.474000, 583.245017, 583.245017, 0.000000, X, Y)
[Fri Dec 23 03:45:08 2011] Writing source region out to fullrun_mos1_xmm0505382401_pi300-10000_pass1_cl_src3_src.reg
[Fri Dec 23 03:45:08 2011] Extracting stamp from image fullrun_mos1_xmm0505382401_pi300-10000_cl_sm2.00.img.gz, (334, 420) - (401, 487)
[Fri Dec 23 03:45:08 2011] XMMSAS bgd. selection expression = annulus(31940.695800, 39408.474000, 972.075028, 1944.150056, X, Y) && !ellipse(33430.921820, 38106.748800, 511.567215, 511.567215, 0.000000, X, Y) && !ellipse(32959.822200, 40152.774400, 414.405612, 414.405612, 0.000000, X, Y)
[Fri Dec 23 03:45:08 2011] Writing fullrun_mos1_xmm0505382401_pi300-10000_pass1_cl_src3.gif
[Fri Dec 23 03:46:43 2011] Mean detx,y = (13115.29, -4206.86) 
[Fri Dec 23 03:46:46 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec 23 03:47:02 2011] Binned source spectrum to 10 counts/bin
[Fri Dec 23 03:47:02 2011] Setting source spectrum file to fullrun_mos1_xmm0505382401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Dec 23 03:47:02 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0505382401_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri Dec 23 03:50:10 2011] Not generating rmf since there are only 36 counts
[Fri Dec 23 03:50:10 2011] rmf not generated due to insufficient counts
[Fri Dec 23 03:59:29 2011] Updating aperture counts using extracted products
[Fri Dec 23 03:59:29 2011] Error reading totcts from fullrun_mos1_xmm0505382401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Dec 23 03:59:30 2011] Calculating source flux in energy range 0.30-8.00
[Fri Dec 23 03:59:30 2011] Using photon index=1.80, rate=0.00357, arf fullrun_mos1_xmm0505382401_pi300-10000_pass1_cl_src3.arf
[Fri Dec 23 03:59:30 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Dec 23 03:59:30 2011] Updating source flux to 8.2e-14
[Fri Dec 23 03:59:36 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Dec 23 03:59:37 2011] xmm0505382401/analysis//spectral/fullrun_mos1_xmm0505382401_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete