[Thu Dec 22 12:24:57 2011] Detection parameters:
  Position = (360.2, 490.8) = 23 20 27.81 -54 46 38.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 47.0 +/- 9.6
  Background counts = 9.7
  Rate = 0.002 +/- 0.0005

[Thu Dec 22 12:24:57 2011] Off-axis axis estimate = 14.64'
[Thu Dec 22 13:04:10 2011] Using EEF radius (= 13.75 ")to estimate initial spatial extent for simple fitting
[Thu Dec 22 13:04:10 2011] Initial guess for spatial extent in simple fitting = 13.75"
[Thu Dec 22 13:04:10 2011] source mask rpix=3.2, npix_max = 53, mask sum = 49, frac = 0.914
[Thu Dec 22 13:04:10 2011] Giving source the simple spatial ID 16 for pass 0, mean size = 13.75"
[Thu Dec 22 14:44:32 2011] fullrun_mos1_xmm0505382301_pi300-10000_cl_pass0_src16.ximg exists
[Thu Dec 22 14:44:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505382301_pi300-10000_cl_pass0_src16.csv
[Thu Dec 22 14:44:32 2011] fullrun_mos1_xmm0505382301_pi300-10000_cl_pass0_src16_1.ximg exists
[Thu Dec 22 14:44:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505382301_pi300-10000_cl_pass0_src16.csv
[Thu Dec 22 14:44:32 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505382301_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505382301_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 22 14:44:32 2011] fullrun_mos1_xmm0505382301_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Thu Dec 22 14:44:32 2011] fullrun_mos1_xmm0505382301_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Thu Dec 22 14:44:32 2011] Fit fullrun_mos1_xmm0505382301_pi300-10000_cl_pass0_tfrozen_src16 appears to have run properly
[Thu Dec 22 15:05:31 2011] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 19 at 18.908527 pixels away
[Thu Dec 22 15:05:31 2011] Vigneting correction estimate = 1.000000
[Thu Dec 22 15:05:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 22 15:05:31 2011] Assessing source extent using major
[Thu Dec 22 15:05:31 2011] Source does appear to be extended
[Thu Dec 22 15:05:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 22 15:05:31 2011] Source is confused with source 9
[Thu Dec 22 15:41:02 2011] Using EEF radius (= 13.75 ")to estimate initial spatial extent for simple fitting
[Thu Dec 22 15:41:02 2011] Initial guess for spatial extent in simple fitting = 13.75"
[Thu Dec 22 15:41:02 2011] source mask rpix=3.2, npix_max = 53, mask sum = 49, frac = 0.914
[Thu Dec 22 15:41:02 2011] Giving source the simple spatial ID 14 for pass 1, mean size = 13.75"
[Thu Dec 22 16:53:17 2011] fullrun_mos1_xmm0505382301_pi300-10000_cl_pass1_src14.ximg exists
[Thu Dec 22 16:53:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505382301_pi300-10000_cl_pass1_src14.csv
[Thu Dec 22 16:53:17 2011] fullrun_mos1_xmm0505382301_pi300-10000_cl_pass1_src14_1.ximg exists
[Thu Dec 22 16:53:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505382301_pi300-10000_cl_pass1_src14.csv
[Thu Dec 22 16:53:17 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505382301_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505382301_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 22 16:53:17 2011] fullrun_mos1_xmm0505382301_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Thu Dec 22 16:53:17 2011] fullrun_mos1_xmm0505382301_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Thu Dec 22 16:53:17 2011] Fit fullrun_mos1_xmm0505382301_pi300-10000_cl_pass1_tfrozen_src14 appears to have run properly
[Thu Dec 22 17:11:35 2011] Spatial fit model total counts = 125.849000, observed total counts = 130.000000
[Thu Dec 22 17:11:35 2011] Offset between fit and detection position for source 19 = 6.143109 pixels
[Thu Dec 22 17:11:35 2011] Warning, changing simple spatial fit ID from 14 to 10
[Thu Dec 22 17:11:35 2011] 120.550800 total counts/ 49.947600 bgd. counts: snr = 9.990036
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 6.143109 pixels
  Position = (357.2, 485.4) = 23 20 29.31 -54 47 2.9
  Extent = 26.6 (26.6-26.6)", rotation angle = 0
  Source counts = 70.6 +/- 11.0
  Background counts = 49.9
  Rate = 0.004 +/- 0.0007
[Thu Dec 22 17:11:35 2011] Vigneting correction estimate = 1.000000
[Thu Dec 22 17:11:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 22 17:11:35 2011] Assessing source extent using major axis lower bound
[Thu Dec 22 17:11:35 2011] Source does appear to be extended
[Thu Dec 22 17:11:35 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 22 17:35:07 2011] XMMSAS src. selection expression = ellipse(31029.082000, 42179.878000, 1598.064046, 1598.064046, 0.000000, X, Y)
[Thu Dec 22 17:35:07 2011] Writing source region out to fullrun_mos1_xmm0505382301_pi300-10000_pass1_cl_src19_src.reg
[Thu Dec 22 17:35:07 2011] Extracting stamp from image fullrun_mos1_xmm0505382301_pi300-10000_cl_sm2.00.img.gz, (265, 394) - (449, 577)
[Thu Dec 22 17:35:07 2011] XMMSAS bgd. selection expression = annulus(31029.082000, 42179.878000, 2663.440077, 5326.880153, X, Y) && !ellipse(29116.197200, 39622.428600, 604.824817, 604.824817, 0.000000, X, Y) && !ellipse(26610.646000, 39018.256200, 379.200811, 379.200811, 0.000000, X, Y) && !ellipse(30906.716820, 40236.140200, 966.240028, 266.351208, 23.409000, X, Y) && !ellipse(32007.476000, 42444.496000, 2183.600063, 2183.600063, 0.000000, X, Y) && !ellipse(29675.476929, 40585.855194, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33005.502289, 42473.042053, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33708.862030, 40342.054474, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26980.108400, 42288.566200, 2121.832061, 636.803218, 46.977769, X, Y)
[Thu Dec 22 17:35:07 2011] Writing fullrun_mos1_xmm0505382301_pi300-10000_pass1_cl_src19.gif
[Thu Dec 22 17:42:19 2011] Mean detx,y = (14707.01, -5898.49) 
[Thu Dec 22 17:42:21 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Dec 22 17:43:55 2011] Binned source spectrum to 10 counts/bin
[Thu Dec 22 17:43:55 2011] Setting source spectrum file to fullrun_mos1_xmm0505382301_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Thu Dec 22 17:43:55 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0505382301_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Thu Dec 22 17:47:43 2011] Not generating rmf since there are only 70 counts
[Thu Dec 22 17:47:43 2011] rmf not generated due to insufficient counts
[Thu Dec 22 17:53:08 2011] Updating aperture counts using extracted products
[Thu Dec 22 17:53:08 2011] Error reading totcts from fullrun_mos1_xmm0505382301_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Thu Dec 22 17:53:09 2011] Calculating source flux in energy range 0.30-8.00
[Thu Dec 22 17:53:09 2011] Using photon index=1.80, rate=0.00424, arf fullrun_mos1_xmm0505382301_pi300-10000_pass1_cl_src19.arf
[Thu Dec 22 17:53:09 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Dec 22 17:53:09 2011] Updating source flux to 1.1e-13
[Thu Dec 22 17:53:11 2011] Flag c found in src. 19 procflags, skipping spectral fitting
[Thu Dec 22 17:53:11 2011] Source 19 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Dec 22 17:53:12 2011] xmm0505382301/analysis//spectral/fullrun_mos1_xmm0505382301_pi300-10000_pass1_cl_src19_pl.csv not found, spectral fit skipped or did not complete