[Thu Dec 22 12:24:57 2011] Detection parameters: Position = (309.7, 486.6) = 23 20 53.19 -54 46 47.6 Extent = 21.7" x 21.7", rotation angle = 0 degrees Source counts = 38.8 +/- 9.5 Background counts = 76.4 Rate = 0.002 +/- 0.0005 [Thu Dec 22 12:24:57 2011] Off-axis axis estimate = 13.67' [Thu Dec 22 13:04:10 2011] Using EEF radius (= 13.26 ")to estimate initial spatial extent for simple fitting [Thu Dec 22 13:04:10 2011] Initial guess for spatial extent in simple fitting = 13.26" [Thu Dec 22 13:04:10 2011] source mask rpix=3.0, npix_max = 50, mask sum = 48, frac = 0.953 [Thu Dec 22 13:04:10 2011] Giving source the simple spatial ID 19 for pass 0, mean size = 13.26" [Thu Dec 22 14:44:32 2011] fullrun_mos1_xmm0505382301_pi300-10000_cl_pass0_src19.ximg exists [Thu Dec 22 14:44:32 2011] fullrun_mos1_xmm0505382301_pi300-10000_cl_pass0_src19_1.ximg exists [Thu Dec 22 14:44:32 2011] Fit fullrun_mos1_xmm0505382301_pi300-10000_cl_pass0_src19 appears to have run properly [Thu Dec 22 14:44:32 2011] fullrun_mos1_xmm0505382301_pi300-10000_cl_pass0_tfrozen_src19.ximg exists [Thu Dec 22 14:44:32 2011] fullrun_mos1_xmm0505382301_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists [Thu Dec 22 14:44:32 2011] Fit fullrun_mos1_xmm0505382301_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly [Thu Dec 22 15:05:31 2011] Spatial fit model total counts = 120.274000, observed total counts = 123.000000 [Thu Dec 22 15:05:31 2011] Offset between fit and detection position for source 18 = 0.953655 pixels [Thu Dec 22 15:05:31 2011] 111.044800 total counts/ 64.482700 bgd. counts: snr = 5.798437 Spatial fit parameters: Offset between fit and detection position for source 18 = 0.953655 pixels Position = (310.7, 486.6) = 23 20 52.72 -54 46 57.6 Extent = 26.5 (18.1-53.0)" x 8.0 (5.5-10.8)", rotation angle = 47 (31-57) degrees Source counts = 46.6 +/- 10.5 Background counts = 64.5 Rate = 0.003 +/- 0.0006 [Thu Dec 22 15:05:31 2011] Vigneting correction estimate = 1.000000 [Thu Dec 22 15:05:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu Dec 22 15:05:31 2011] Assessing source extent using major axis lower bound [Thu Dec 22 15:05:31 2011] Source does appear to be extended [Thu Dec 22 15:05:31 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.68 [Thu Dec 22 15:05:31 2011] Source is asymmetric [Thu Dec 22 15:41:02 2011] Using previous fit value to estimate initial spatial extent for simple fitting [Thu Dec 22 15:41:02 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Thu Dec 22 15:41:02 2011] Initial guess for spatial extent in simple fitting = 17.24" [Thu Dec 22 15:41:02 2011] source mask rpix=4.0, npix_max = 79, mask sum = 78, frac = 0.979 [Thu Dec 22 15:41:02 2011] Giving source the simple spatial ID 16 for pass 1, mean size = 17.24" [Thu Dec 22 16:53:17 2011] fullrun_mos1_xmm0505382301_pi300-10000_cl_pass1_src16.ximg exists [Thu Dec 22 16:53:17 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0505382301_pi300-10000_cl_pass1_src16.csv [Thu Dec 22 16:53:17 2011] fullrun_mos1_xmm0505382301_pi300-10000_cl_pass1_src16_1.ximg exists [Thu Dec 22 16:53:17 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0505382301_pi300-10000_cl_pass1_src16.csv [Thu Dec 22 16:53:17 2011] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0505382301_pi300-10000_cl_pass1_src16_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0505382301_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu Dec 22 16:53:17 2011] fullrun_mos1_xmm0505382301_pi300-10000_cl_pass1_tfrozen_src16.ximg exists [Thu Dec 22 16:53:17 2011] fullrun_mos1_xmm0505382301_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists [Thu Dec 22 16:53:17 2011] Fit fullrun_mos1_xmm0505382301_pi300-10000_cl_pass1_tfrozen_src16 appears to have run properly [Thu Dec 22 17:11:35 2011] Warning, spatial fit 14 centroid is now closest to src. 7 [Thu Dec 22 17:11:35 2011] Warning, spatial fit 16 centroid is now closest to src. 15 [Thu Dec 22 17:11:35 2011] Vigneting correction estimate = 1.000000 [Thu Dec 22 17:11:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu Dec 22 17:11:35 2011] Assessing source extent using major axis lower bound [Thu Dec 22 17:11:35 2011] Source does appear to be extended [Thu Dec 22 17:11:35 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.68 [Thu Dec 22 17:11:35 2011] Source is asymmetric [Thu Dec 22 17:35:07 2011] XMMSAS src. selection expression = ellipse(26980.108400, 42288.566200, 1591.374046, 477.602414, 46.977769, X, Y) [Thu Dec 22 17:35:07 2011] Writing source region out to fullrun_mos1_xmm0505382301_pi300-10000_pass1_cl_src18_src.reg [Thu Dec 22 17:35:07 2011] Extracting stamp from image fullrun_mos1_xmm0505382301_pi300-10000_cl_sm2.00.img.gz, (219, 395) - (402, 578) [Thu Dec 22 17:35:07 2011] XMMSAS bgd. selection expression = annulus(26980.108400, 42288.566200, 2652.290076, 5304.580153, X, Y) && !ellipse(29116.197200, 39622.428600, 604.824817, 604.824817, 0.000000, X, Y) && !ellipse(26610.646000, 39018.256200, 379.200811, 379.200811, 0.000000, X, Y) && !ellipse(30906.716820, 40236.140200, 966.240028, 266.351208, 23.409000, X, Y) && !ellipse(32007.476000, 42444.496000, 2183.600063, 2183.600063, 0.000000, X, Y) && !ellipse(29675.476929, 40585.855194, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33005.502289, 42473.042053, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31029.082000, 42179.878000, 2130.752061, 2130.752061, 0.000000, X, Y) [Thu Dec 22 17:35:07 2011] Writing fullrun_mos1_xmm0505382301_pi300-10000_pass1_cl_src18.gif [Thu Dec 22 17:44:31 2011] Mean detx,y = (12171.97, -9847.34) [Thu Dec 22 17:44:33 2011] Setting backscal keywords in source and bgd. spectrum [Thu Dec 22 17:45:52 2011] Binned source spectrum to 10 counts/bin [Thu Dec 22 17:45:52 2011] Setting source spectrum file to fullrun_mos1_xmm0505382301_pi300-10000_pass1_cl_src18_src_b10.pi.gz [Thu Dec 22 17:45:52 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0505382301_pi300-10000_pass1_cl_src18_bgd.pi.gz [Thu Dec 22 17:48:35 2011] Not generating rmf since there are only 46 counts [Thu Dec 22 17:48:35 2011] rmf not generated due to insufficient counts [Thu Dec 22 17:53:08 2011] Updating aperture counts using extracted products [Thu Dec 22 17:53:08 2011] Error reading totcts from fullrun_mos1_xmm0505382301_pi300-10000_pass1_cl_src18_src_b10.pi.gz [Thu Dec 22 17:53:09 2011] Calculating source flux in energy range 0.30-8.00 [Thu Dec 22 17:53:09 2011] Using photon index=1.80, rate=0.00279, arf fullrun_mos1_xmm0505382301_pi300-10000_pass1_cl_src18.arf [Thu Dec 22 17:53:09 2011] Assuming count rate is from the 0.30-10.00 bandpass [Thu Dec 22 17:53:09 2011] Updating source flux to 8.1e-14 [Thu Dec 22 17:53:11 2011] Source 18 has fewer than 100.000000 counts, skipping spectral fitting [Thu Dec 22 17:53:12 2011] xmm0505382301/analysis//spectral/fullrun_mos1_xmm0505382301_pi300-10000_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete