[Thu Dec 22 12:24:57 2011] Detection parameters:
  Position = (388.0, 464.3) = 23 20 13.79 -54 48 34.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 43.6 +/- 11.1
  Background counts = 21.9
  Rate = 0.002 +/- 0.0006

[Thu Dec 22 12:24:57 2011] Off-axis axis estimate = 13.66'
[Thu Dec 22 13:04:10 2011] Using EEF radius (= 13.26 ")to estimate initial spatial extent for simple fitting
[Thu Dec 22 13:04:10 2011] Initial guess for spatial extent in simple fitting = 13.26"
[Thu Dec 22 13:04:10 2011] source mask rpix=3.0, npix_max = 50, mask sum = 51, frac = 1.013
[Thu Dec 22 13:04:10 2011] Giving source the simple spatial ID 18 for pass 0, mean size = 13.26"
[Thu Dec 22 14:44:32 2011] fullrun_mos1_xmm0505382301_pi300-10000_cl_pass0_src18.ximg exists
[Thu Dec 22 14:44:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505382301_pi300-10000_cl_pass0_src18.csv
[Thu Dec 22 14:44:32 2011] fullrun_mos1_xmm0505382301_pi300-10000_cl_pass0_src18_1.ximg exists
[Thu Dec 22 14:44:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505382301_pi300-10000_cl_pass0_src18.csv
[Thu Dec 22 14:44:32 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505382301_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505382301_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 22 14:44:32 2011] fullrun_mos1_xmm0505382301_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Thu Dec 22 14:44:32 2011] fullrun_mos1_xmm0505382301_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Thu Dec 22 14:44:32 2011] Fit fullrun_mos1_xmm0505382301_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly
[Thu Dec 22 15:05:31 2011] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 12.632361 pixels away
[Thu Dec 22 15:05:31 2011] Vigneting correction estimate = 1.000000
[Thu Dec 22 15:05:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 22 15:05:31 2011] Assessing source extent using major
[Thu Dec 22 15:05:31 2011] Source does appear to be extended
[Thu Dec 22 15:05:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 22 15:41:02 2011] Using EEF radius (= 13.26 ")to estimate initial spatial extent for simple fitting
[Thu Dec 22 15:41:02 2011] Initial guess for spatial extent in simple fitting = 13.26"
[Thu Dec 22 15:41:02 2011] source mask rpix=3.0, npix_max = 50, mask sum = 51, frac = 1.013
[Thu Dec 22 15:41:02 2011] Giving source the simple spatial ID 15 for pass 1, mean size = 13.26"
[Thu Dec 22 16:53:17 2011] fullrun_mos1_xmm0505382301_pi300-10000_cl_pass1_src15.ximg exists
[Thu Dec 22 16:53:17 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0505382301_pi300-10000_cl_pass1_src15.csv
[Thu Dec 22 16:53:17 2011] fullrun_mos1_xmm0505382301_pi300-10000_cl_pass1_src15_1.ximg exists
[Thu Dec 22 16:53:17 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0505382301_pi300-10000_cl_pass1_src15.csv
[Thu Dec 22 16:53:17 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505382301_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505382301_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 22 16:53:17 2011] fullrun_mos1_xmm0505382301_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Thu Dec 22 16:53:17 2011] fullrun_mos1_xmm0505382301_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Thu Dec 22 16:53:17 2011] Fit fullrun_mos1_xmm0505382301_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Thu Dec 22 17:11:35 2011] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 12.420328 pixels away
[Thu Dec 22 17:11:35 2011] Vigneting correction estimate = 1.000000
[Thu Dec 22 17:11:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 22 17:11:35 2011] Assessing source extent using major
[Thu Dec 22 17:11:35 2011] Source does appear to be extended
[Thu Dec 22 17:11:35 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 22 17:35:07 2011] XMMSAS src. selection expression = ellipse(33708.862030, 40342.054474, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Dec 22 17:35:07 2011] Writing source region out to fullrun_mos1_xmm0505382301_pi300-10000_pass1_cl_src16_src.reg
[Thu Dec 22 17:35:07 2011] Extracting stamp from image fullrun_mos1_xmm0505382301_pi300-10000_cl_sm2.00.img.gz, (351, 427) - (426, 502)
[Thu Dec 22 17:35:07 2011] XMMSAS bgd. selection expression = annulus(33708.862030, 40342.054474, 1087.500000, 2175.000000, X, Y) && !ellipse(30906.716820, 40236.140200, 966.240028, 266.351208, 23.409000, X, Y) && !ellipse(32007.476000, 42444.496000, 2183.600063, 2183.600063, 0.000000, X, Y) && !ellipse(33005.502289, 42473.042053, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31029.082000, 42179.878000, 2130.752061, 2130.752061, 0.000000, X, Y)
[Thu Dec 22 17:35:07 2011] Writing fullrun_mos1_xmm0505382301_pi300-10000_pass1_cl_src16.gif
[Thu Dec 22 17:44:01 2011] Mean detx,y = (14931.24, -3152.13) 
[Thu Dec 22 17:44:03 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Dec 22 17:44:26 2011] Binned source spectrum to 10 counts/bin
[Thu Dec 22 17:44:26 2011] Setting source spectrum file to fullrun_mos1_xmm0505382301_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Thu Dec 22 17:44:26 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0505382301_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Thu Dec 22 17:48:30 2011] Not generating rmf since there are only 43 counts
[Thu Dec 22 17:48:30 2011] rmf not generated due to insufficient counts
[Thu Dec 22 17:53:08 2011] Updating aperture counts using extracted products
[Thu Dec 22 17:53:08 2011] Error reading totcts from fullrun_mos1_xmm0505382301_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Thu Dec 22 17:53:09 2011] Calculating source flux in energy range 0.30-8.00
[Thu Dec 22 17:53:09 2011] Using photon index=1.80, rate=0.00219, arf fullrun_mos1_xmm0505382301_pi300-10000_pass1_cl_src16.arf
[Thu Dec 22 17:53:09 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Dec 22 17:53:09 2011] Updating source flux to 5.5e-14
[Thu Dec 22 17:53:11 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Dec 22 17:53:12 2011] xmm0505382301/analysis//spectral/fullrun_mos1_xmm0505382301_pi300-10000_pass1_cl_src16_pl.csv not found, spectral fit skipped or did not complete