[Wed Jan  4 05:21:32 2012] Detection parameters:
  Position = (326.7, 331.8) = 23 18 6.43 -54 57 48.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 489.9 +/- 27.4
  Background counts = 24.0
  Rate = 0.04 +/- 0.002

[Wed Jan  4 05:21:33 2012] Off-axis axis estimate = 3.17'
[Wed Jan  4 05:23:38 2012] Using EEF radius (= 8.01 ")to estimate initial spatial extent for simple fitting
[Wed Jan  4 05:23:38 2012] Initial guess for spatial extent in simple fitting = 8.01"
[Wed Jan  4 05:23:38 2012] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.139
[Wed Jan  4 05:23:38 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 8.01"
[Wed Jan  4 06:08:37 2012] fullrun_pn_xmm0505382201_pi300-10000_cl_pass0_src5.ximg exists
[Wed Jan  4 06:08:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505382201_pi300-10000_cl_pass0_src5.csv
[Wed Jan  4 06:08:37 2012] fullrun_pn_xmm0505382201_pi300-10000_cl_pass0_src5_1.ximg exists
[Wed Jan  4 06:08:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505382201_pi300-10000_cl_pass0_src5.csv
[Wed Jan  4 06:08:37 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505382201_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505382201_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan  4 06:08:37 2012] fullrun_pn_xmm0505382201_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Wed Jan  4 06:08:37 2012] fullrun_pn_xmm0505382201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Wed Jan  4 06:08:37 2012] Fit fullrun_pn_xmm0505382201_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Wed Jan  4 06:44:37 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 11.485180 pixels away
[Wed Jan  4 06:44:37 2012] Vigneting correction estimate = 1.000000
[Wed Jan  4 06:44:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan  4 06:44:37 2012] Assessing source extent using major
[Wed Jan  4 06:44:37 2012] Source does appear to be extended
[Wed Jan  4 06:44:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan  4 06:44:49 2012] Using EEF radius (= 8.01 ")to estimate initial spatial extent for simple fitting
[Wed Jan  4 06:44:49 2012] Initial guess for spatial extent in simple fitting = 8.01"
[Wed Jan  4 06:44:49 2012] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.139
[Wed Jan  4 06:44:49 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 8.01"
[Wed Jan  4 07:31:10 2012] fullrun_pn_xmm0505382201_pi300-10000_cl_pass1_src5.ximg exists
[Wed Jan  4 07:31:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505382201_pi300-10000_cl_pass1_src5.csv
[Wed Jan  4 07:31:10 2012] fullrun_pn_xmm0505382201_pi300-10000_cl_pass1_src5_1.ximg exists
[Wed Jan  4 07:31:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505382201_pi300-10000_cl_pass1_src5.csv
[Wed Jan  4 07:31:10 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505382201_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505382201_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan  4 07:31:10 2012] fullrun_pn_xmm0505382201_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Wed Jan  4 07:31:10 2012] fullrun_pn_xmm0505382201_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Wed Jan  4 07:31:10 2012] Fit fullrun_pn_xmm0505382201_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Wed Jan  4 08:14:41 2012] Spatial fit model total counts = 585.898000, observed total counts = 589.000000
[Wed Jan  4 08:14:41 2012] Offset between fit and detection position for source 5 = 0.268163 pixels
[Wed Jan  4 08:14:41 2012] 584.678000 total counts/ 237.910000 bgd. counts: snr = 22.481882
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.268163 pixels
  Position = (326.5, 331.7) = 23 18 6.56 -54 57 48.3
  Extent = 5.6 (5.2-6.2)", rotation angle = 0
  Source counts = 346.8 +/- 24.2
  Background counts = 237.9
  Rate = 0.02 +/- 0.002
[Wed Jan  4 08:14:41 2012] Vigneting correction estimate = 1.000000
[Wed Jan  4 08:14:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan  4 08:14:41 2012] Assessing source extent using major axis lower bound
[Wed Jan  4 08:14:41 2012] Source does appear to be extended
[Wed Jan  4 08:14:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan  4 08:14:53 2012] XMMSAS src. selection expression = ellipse(28354.587800, 28809.752200, 338.585410, 338.585410, 0.000000, X, Y)
[Wed Jan  4 08:14:53 2012] Writing source region out to fullrun_pn_xmm0505382201_pi300-10000_pass1_cl_src5_src.reg
[Wed Jan  4 08:14:53 2012] Extracting stamp from image fullrun_pn_xmm0505382201_pi300-10000_cl_sm2.00.img.gz, (307, 312) - (346, 351)
[Wed Jan  4 08:14:53 2012] XMMSAS bgd. selection expression = annulus(28354.587800, 28809.752200, 564.309016, 1128.618032, X, Y)
[Wed Jan  4 08:14:53 2012] Writing fullrun_pn_xmm0505382201_pi300-10000_pass1_cl_src5.gif
[Wed Jan  4 08:17:15 2012] Mean detx,y = (-1597.61, -2274.01) 
[Wed Jan  4 08:17:18 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan  4 08:17:44 2012] Binned source spectrum to 10 counts/bin
[Wed Jan  4 08:17:45 2012] Setting source spectrum file to fullrun_pn_xmm0505382201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed Jan  4 08:17:45 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505382201_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Wed Jan  4 09:05:21 2012] Updating aperture counts using extracted products
[Wed Jan  4 09:05:21 2012] Error reading totcts from fullrun_pn_xmm0505382201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed Jan  4 09:05:22 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan  4 09:05:22 2012] Using photon index=1.80, rate=0.0235, arf fullrun_pn_xmm0505382201_pi300-10000_pass1_cl_src5.arf
[Wed Jan  4 09:05:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan  4 09:05:22 2012] Updating source flux to 8.3e-14
[Wed Jan  4 09:06:19 2012] Reading fit data from xmm0505382201/analysis//spectral/fullrun_pn_xmm0505382201_pi300-10000_pass1_cl_src5_pl.csv
[Wed Jan  4 09:06:19 2012] Spectral fit parameter nH value = 2.22528e+14
[Wed Jan  4 09:06:19 2012] Spectral fit parameter PhoIndex value = 2.20029
[Wed Jan  4 09:06:19 2012] Failed to get F(0.3-8.0) from xmm0505382201/analysis//spectral/fullrun_pn_xmm0505382201_pi300-10000_pass1_cl_src5_pl.csv, possibly due to different flux energy range selected
[Wed Jan  4 09:06:19 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan  4 09:06:19 2012] Using Nh = 2.2e+14, photon index=2.20, rate=0.0235, arf fullrun_pn_xmm0505382201_pi300-10000_pass1_cl_src5.arf
[Wed Jan  4 09:06:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan  4 09:06:19 2012] Updating source flux to 6.4e-14