[Wed Jan  4 05:21:51 2012] Detection parameters:
  Position = (472.3, 192.8) = 23 16 52.54 -55 7 52.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 215.4 +/- 18.7
  Background counts = 16.1
  Rate = 0.01 +/- 0.0009

[Wed Jan  4 05:21:52 2012] Off-axis axis estimate = 14.75'
[Wed Jan  4 06:08:38 2012] Using EEF radius (= 13.80 ")to estimate initial spatial extent for simple fitting
[Wed Jan  4 06:08:38 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jan  4 06:08:38 2012] Initial guess for spatial extent in simple fitting = 13.80"
[Wed Jan  4 06:08:38 2012] source mask rpix=3.2, npix_max = 53, mask sum = 40, frac = 0.741
[Wed Jan  4 06:08:38 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 13.80"
[Wed Jan  4 06:25:48 2012] fullrun_mos1_xmm0505382201_pi300-10000_cl_pass0_src3.ximg exists
[Wed Jan  4 06:25:48 2012] fullrun_mos1_xmm0505382201_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed Jan  4 06:25:48 2012] Fit fullrun_mos1_xmm0505382201_pi300-10000_cl_pass0_src3 appears to have run properly
[Wed Jan  4 06:25:48 2012] fullrun_mos1_xmm0505382201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed Jan  4 06:25:48 2012] fullrun_mos1_xmm0505382201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Jan  4 06:25:48 2012] Fit fullrun_mos1_xmm0505382201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Jan  4 06:44:39 2012] Spatial fit model total counts = 245.773000, observed total counts = 246.000000
[Wed Jan  4 06:44:39 2012] Offset between fit and detection position for source 1 = 0.202636 pixels
[Wed Jan  4 06:44:39 2012] 244.182000 total counts/ 142.183000 bgd. counts: snr = 8.554056
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.202636 pixels
  Position = (472.1, 192.7) = 23 16 52.64 -55 7 50.9
  Extent = 4.5 (3.7-5.5)", rotation angle = 0
  Source counts = 102.0 +/- 15.6
  Background counts = 142.2
  Rate = 0.006 +/- 0.0009
[Wed Jan  4 06:44:39 2012] Vigneting correction estimate = 1.000000
[Wed Jan  4 06:44:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan  4 06:44:39 2012] Assessing source extent using major axis lower bound
[Wed Jan  4 06:44:39 2012] Source does appear to be extended
[Wed Jan  4 06:44:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan  4 07:31:11 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jan  4 07:31:11 2012] Initial guess for spatial extent in simple fitting = 4.48"
[Wed Jan  4 07:31:11 2012] source mask rpix=1.0, npix_max = 9, mask sum = 8, frac = 0.855
[Wed Jan  4 07:31:11 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 4.48"
[Wed Jan  4 07:50:28 2012] fullrun_mos1_xmm0505382201_pi300-10000_cl_pass1_src3.ximg exists
[Wed Jan  4 07:50:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505382201_pi300-10000_cl_pass1_src3.csv
[Wed Jan  4 07:50:28 2012] fullrun_mos1_xmm0505382201_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed Jan  4 07:50:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505382201_pi300-10000_cl_pass1_src3.csv
[Wed Jan  4 07:50:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505382201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505382201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan  4 07:50:28 2012] fullrun_mos1_xmm0505382201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed Jan  4 07:50:28 2012] fullrun_mos1_xmm0505382201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Jan  4 07:50:28 2012] Fit fullrun_mos1_xmm0505382201_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Jan  4 08:14:43 2012] Spatial fit model total counts = 205.809000, observed total counts = 206.000000
[Wed Jan  4 08:14:43 2012] Offset between fit and detection position for source 1 = 0.004270 pixels
[Wed Jan  4 08:14:43 2012] 203.616600 total counts/ 103.857000 bgd. counts: snr = 9.788966
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.004270 pixels
  Position = (472.1, 192.7) = 23 16 52.64 -55 7 50.9
  Extent = 4.3 (3.6-5.4)", rotation angle = 0
  Source counts = 99.8 +/- 14.3
  Background counts = 103.9
  Rate = 0.006 +/- 0.0009
[Wed Jan  4 08:14:43 2012] Vigneting correction estimate = 1.000000
[Wed Jan  4 08:14:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan  4 08:14:43 2012] Assessing source extent using major axis lower bound
[Wed Jan  4 08:14:43 2012] Source does appear to be extended
[Wed Jan  4 08:14:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan  4 08:45:35 2012] XMMSAS src. selection expression = ellipse(41021.921020, 16720.538800, 259.690207, 259.690207, 0.000000, X, Y)
[Wed Jan  4 08:45:35 2012] Writing source region out to fullrun_mos1_xmm0505382201_pi300-10000_pass1_cl_src1_src.reg
[Wed Jan  4 08:45:35 2012] Extracting stamp from image fullrun_mos1_xmm0505382201_pi300-10000_cl_sm2.00.img.gz, (457, 178) - (487, 208)
[Wed Jan  4 08:45:35 2012] XMMSAS bgd. selection expression = annulus(41021.921020, 16720.538800, 432.817012, 865.634025, X, Y)
[Wed Jan  4 08:45:35 2012] Writing fullrun_mos1_xmm0505382201_pi300-10000_pass1_cl_src1.gif
[Wed Jan  4 08:46:02 2012] Mean detx,y = (3837.90, 15525.64) 
[Wed Jan  4 08:46:04 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan  4 08:46:11 2012] Binned source spectrum to 10 counts/bin
[Wed Jan  4 08:46:11 2012] Setting source spectrum file to fullrun_mos1_xmm0505382201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jan  4 08:46:11 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505382201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Jan  4 08:55:36 2012] Not generating rmf since there are only 99 counts
[Wed Jan  4 08:55:36 2012] rmf not generated due to insufficient counts
[Wed Jan  4 09:05:22 2012] Updating aperture counts using extracted products
[Wed Jan  4 09:05:22 2012] Error reading totcts from fullrun_mos1_xmm0505382201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jan  4 09:05:23 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan  4 09:05:23 2012] Using photon index=1.80, rate=0.00605, arf fullrun_mos1_xmm0505382201_pi300-10000_pass1_cl_src1.arf
[Wed Jan  4 09:05:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan  4 09:05:23 2012] Updating source flux to 1.9e-13
[Wed Jan  4 09:05:25 2012] Source 1 has fewer than 100.000000 counts, skipping spectral fitting