[Thu Feb 16 12:24:19 2012] Detection parameters:
  Position = (293.9, 263.1) = 23 38 14.28 -55 26 17.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 50.6 +/- 9.2
  Background counts = 5.8
  Rate = 0.006 +/- 0.001

[Thu Feb 16 12:24:20 2012] Off-axis axis estimate = 2.58'
[Thu Feb 16 12:41:42 2012] Using EEF radius (= 7.72 ")to estimate initial spatial extent for simple fitting
[Thu Feb 16 12:41:42 2012] Initial guess for spatial extent in simple fitting = 7.72"
[Thu Feb 16 12:41:42 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.773
[Thu Feb 16 12:41:42 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 7.72"
[Thu Feb 16 12:50:43 2012] fullrun_mos1_xmm0505382101_pi300-10000_cl_pass0_src4.ximg exists
[Thu Feb 16 12:50:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505382101_pi300-10000_cl_pass0_src4.csv
[Thu Feb 16 12:50:43 2012] fullrun_mos1_xmm0505382101_pi300-10000_cl_pass0_src4_1.ximg exists
[Thu Feb 16 12:50:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505382101_pi300-10000_cl_pass0_src4.csv
[Thu Feb 16 12:50:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505382101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505382101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 12:50:43 2012] fullrun_mos1_xmm0505382101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Thu Feb 16 12:50:43 2012] fullrun_mos1_xmm0505382101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Thu Feb 16 12:50:43 2012] Fit fullrun_mos1_xmm0505382101_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Thu Feb 16 13:00:02 2012] Spatial fit model total counts = 92.636200, observed total counts = 93.000000
[Thu Feb 16 13:00:02 2012] Offset between fit and detection position for source 6 = 0.108689 pixels
[Thu Feb 16 13:00:02 2012] 93.318100 total counts/ 61.481200 bgd. counts: snr = 4.060314
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.108689 pixels
  Position = (294.0, 263.1) = 23 38 14.23 -55 26 17.5
  Extent = 4.0 (2.9-6.4)", rotation angle = 0
  Source counts = 31.8 +/- 9.7
  Background counts = 61.5
  Rate = 0.003 +/- 0.0009
[Thu Feb 16 13:00:02 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 13:00:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 13:00:02 2012] Assessing source extent using major axis lower bound
[Thu Feb 16 13:00:02 2012] Source does appear to be extended
[Thu Feb 16 13:00:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 13:13:59 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Feb 16 13:13:59 2012] Initial guess for spatial extent in simple fitting = 3.98"
[Thu Feb 16 13:13:59 2012] source mask rpix=0.9, npix_max = 8, mask sum = 4, frac = 0.499
[Thu Feb 16 13:13:59 2012] Skipping simple spatial due to low active detector fraction
[Thu Feb 16 13:30:34 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 13:30:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 13:30:34 2012] Assessing source extent using major axis lower bound
[Thu Feb 16 13:30:34 2012] Source does appear to be extended
[Thu Feb 16 13:30:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 13:39:38 2012] XMMSAS src. selection expression = ellipse(25529.195412, 22838.861800, 239.079007, 239.079007, 0.000000, X, Y)
[Thu Feb 16 13:39:38 2012] Writing source region out to fullrun_mos1_xmm0505382101_pi300-10000_pass1_cl_src6_src.reg
[Thu Feb 16 13:39:38 2012] Extracting stamp from image fullrun_mos1_xmm0505382101_pi300-10000_cl_sm2.00.img.gz, (280, 249) - (308, 277)
[Thu Feb 16 13:39:38 2012] XMMSAS bgd. selection expression = annulus(25529.195412, 22838.861800, 398.465011, 796.930023, X, Y)
[Thu Feb 16 13:39:38 2012] Writing fullrun_mos1_xmm0505382101_pi300-10000_pass1_cl_src6.gif
[Thu Feb 16 13:40:08 2012] Mean detx,y = (-4380.56, -515.13) 
[Thu Feb 16 13:40:09 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb 16 13:40:15 2012] Binned source spectrum to 10 counts/bin
[Thu Feb 16 13:40:15 2012] Setting source spectrum file to fullrun_mos1_xmm0505382101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Thu Feb 16 13:40:15 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505382101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Thu Feb 16 13:41:29 2012] Not generating rmf since there are only 31 counts
[Thu Feb 16 13:41:29 2012] rmf not generated due to insufficient counts
[Thu Feb 16 13:44:07 2012] Updating aperture counts using extracted products
[Thu Feb 16 13:44:07 2012] Error reading totcts from fullrun_mos1_xmm0505382101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Thu Feb 16 13:44:07 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 16 13:44:07 2012] Using photon index=1.80, rate=0.00312, arf fullrun_mos1_xmm0505382101_pi300-10000_pass1_cl_src6.arf
[Thu Feb 16 13:44:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb 16 13:44:07 2012] Updating source flux to 5.2e-14
[Thu Feb 16 13:44:08 2012] Source 6 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Feb 16 13:44:09 2012] xmm0505382101/analysis//spectral/fullrun_mos1_xmm0505382101_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete