[Thu Feb 16 12:24:19 2012] Detection parameters:
  Position = (270.3, 319.6) = 23 38 26.30 -55 22 10.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 27.0 +/- 7.0
  Background counts = 5.4
  Rate = 0.003 +/- 0.0008

[Thu Feb 16 12:24:20 2012] Off-axis axis estimate = 2.55'
[Thu Feb 16 12:41:42 2012] Using EEF radius (= 7.70 ")to estimate initial spatial extent for simple fitting
[Thu Feb 16 12:41:42 2012] Initial guess for spatial extent in simple fitting = 7.70"
[Thu Feb 16 12:41:42 2012] source mask rpix=1.8, npix_max = 20, mask sum = 25, frac = 1.212
[Thu Feb 16 12:41:42 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 7.70"
[Thu Feb 16 12:50:43 2012] fullrun_mos1_xmm0505382101_pi300-10000_cl_pass0_src7.ximg exists
[Thu Feb 16 12:50:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505382101_pi300-10000_cl_pass0_src7.csv
[Thu Feb 16 12:50:43 2012] fullrun_mos1_xmm0505382101_pi300-10000_cl_pass0_src7_1.ximg exists
[Thu Feb 16 12:50:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505382101_pi300-10000_cl_pass0_src7.csv
[Thu Feb 16 12:50:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505382101_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505382101_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 12:50:43 2012] fullrun_mos1_xmm0505382101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Thu Feb 16 12:50:43 2012] fullrun_mos1_xmm0505382101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Thu Feb 16 12:50:43 2012] Fit fullrun_mos1_xmm0505382101_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Thu Feb 16 13:00:02 2012] Source 5 is offset by -4.072049 and -7.438513 pixels which is larger than
2 X fitted extent = 0.885623 x 0.885623, not incorporating fit results
[Thu Feb 16 13:00:02 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 13:00:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 13:00:02 2012] Assessing source extent using major
[Thu Feb 16 13:00:02 2012] Source does appear to be extended
[Thu Feb 16 13:00:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 13:13:59 2012] Using EEF radius (= 7.70 ")to estimate initial spatial extent for simple fitting
[Thu Feb 16 13:13:59 2012] Initial guess for spatial extent in simple fitting = 7.70"
[Thu Feb 16 13:13:59 2012] source mask rpix=1.8, npix_max = 20, mask sum = 25, frac = 1.212
[Thu Feb 16 13:13:59 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 7.70"
[Thu Feb 16 13:22:29 2012] fullrun_mos1_xmm0505382101_pi300-10000_cl_pass1_src6.ximg exists
[Thu Feb 16 13:22:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505382101_pi300-10000_cl_pass1_src6.csv
[Thu Feb 16 13:22:29 2012] fullrun_mos1_xmm0505382101_pi300-10000_cl_pass1_src6_1.ximg exists
[Thu Feb 16 13:22:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505382101_pi300-10000_cl_pass1_src6.csv
[Thu Feb 16 13:22:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505382101_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505382101_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 13:22:29 2012] fullrun_mos1_xmm0505382101_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Thu Feb 16 13:22:29 2012] fullrun_mos1_xmm0505382101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Thu Feb 16 13:22:29 2012] Fit fullrun_mos1_xmm0505382101_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Thu Feb 16 13:30:34 2012] Spatial fit model total counts = 70.999900, observed total counts = 71.000000
[Thu Feb 16 13:30:34 2012] Offset between fit and detection position for source 5 = 0.044757 pixels
[Thu Feb 16 13:30:34 2012] 68.550600 total counts/ 50.284500 bgd. counts: snr = 2.575899
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.044757 pixels
  Position = (270.4, 319.7) = 23 38 26.29 -55 22 11.2
  Extent = 4.5 (2.8-6.3)", rotation angle = 0
  Source counts = 18.3 +/- 8.3
  Background counts = 50.3
  Rate = 0.002 +/- 0.0008
[Thu Feb 16 13:30:34 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 13:30:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 13:30:34 2012] Assessing source extent using major axis lower bound
[Thu Feb 16 13:30:34 2012] Source does appear to be extended
[Thu Feb 16 13:30:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 13:39:38 2012] XMMSAS src. selection expression = ellipse(23472.307400, 27764.113400, 267.609608, 267.609608, 0.000000, X, Y)
[Thu Feb 16 13:39:38 2012] Writing source region out to fullrun_mos1_xmm0505382101_pi300-10000_pass1_cl_src5_src.reg
[Thu Feb 16 13:39:38 2012] Extracting stamp from image fullrun_mos1_xmm0505382101_pi300-10000_cl_sm2.00.img.gz, (255, 304) - (286, 335)
[Thu Feb 16 13:39:38 2012] XMMSAS bgd. selection expression = annulus(23472.307400, 27764.113400, 446.016013, 892.032026, X, Y)
[Thu Feb 16 13:39:38 2012] Writing fullrun_mos1_xmm0505382101_pi300-10000_pass1_cl_src5.gif
[Thu Feb 16 13:40:42 2012] Mean detx,y = (-669.21, -4336.79) 
[Thu Feb 16 13:40:43 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb 16 13:40:49 2012] Binned source spectrum to 10 counts/bin
[Thu Feb 16 13:40:49 2012] Setting source spectrum file to fullrun_mos1_xmm0505382101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu Feb 16 13:40:49 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505382101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Thu Feb 16 13:41:44 2012] Not generating rmf since there are only 18 counts
[Thu Feb 16 13:41:44 2012] rmf not generated due to insufficient counts
[Thu Feb 16 13:44:07 2012] Updating aperture counts using extracted products
[Thu Feb 16 13:44:07 2012] Error reading totcts from fullrun_mos1_xmm0505382101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu Feb 16 13:44:07 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 16 13:44:07 2012] Using photon index=1.80, rate=0.00179, arf fullrun_mos1_xmm0505382101_pi300-10000_pass1_cl_src5.arf
[Thu Feb 16 13:44:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb 16 13:44:07 2012] Updating source flux to 2.9e-14
[Thu Feb 16 13:44:08 2012] Flag b found in src. 5 procflags, skipping spectral fitting
[Thu Feb 16 13:44:08 2012] Source 5 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Feb 16 13:44:09 2012] xmm0505382101/analysis//spectral/fullrun_mos1_xmm0505382101_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete