[Thu Apr  5 23:34:05 2012] Detection parameters:
  Position = (249.6, 262.1) = 23 33 15.93 -55 26 20.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 27.0 +/- 6.6
  Background counts = 4.4
  Rate = 0.004 +/- 0.001

[Thu Apr  5 23:34:05 2012] Off-axis axis estimate = 4.41'
[Fri Apr  6 00:03:33 2012] Using EEF radius (= 8.63 ")to estimate initial spatial extent for simple fitting
[Fri Apr  6 00:03:33 2012] Initial guess for spatial extent in simple fitting = 8.63"
[Fri Apr  6 00:03:33 2012] source mask rpix=2.0, npix_max = 24, mask sum = 19, frac = 0.769
[Fri Apr  6 00:03:33 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 8.63"
[Fri Apr  6 00:17:25 2012] fullrun_mos2_xmm0505381901_pi300-10000_cl_pass0_src8.ximg exists
[Fri Apr  6 00:17:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505381901_pi300-10000_cl_pass0_src8.csv
[Fri Apr  6 00:17:25 2012] fullrun_mos2_xmm0505381901_pi300-10000_cl_pass0_src8_1.ximg exists
[Fri Apr  6 00:17:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505381901_pi300-10000_cl_pass0_src8.csv
[Fri Apr  6 00:17:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505381901_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505381901_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Apr  6 00:17:25 2012] fullrun_mos2_xmm0505381901_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Fri Apr  6 00:17:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505381901_pi300-10000_cl_pass0_tfrozen_src8.csv
[Fri Apr  6 00:17:25 2012] fullrun_mos2_xmm0505381901_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Fri Apr  6 00:17:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505381901_pi300-10000_cl_pass0_tfrozen_src8.csv
[Fri Apr  6 00:17:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505381901_pi300-10000_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505381901_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Apr  6 00:17:34 2012] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 11.456664 pixels away
[Fri Apr  6 00:17:34 2012] Vigneting correction estimate = 1.000000
[Fri Apr  6 00:17:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Apr  6 00:17:34 2012] Assessing source extent using major
[Fri Apr  6 00:17:34 2012] Source does appear to be extended
[Fri Apr  6 00:17:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Apr  6 00:46:40 2012] Using EEF radius (= 8.63 ")to estimate initial spatial extent for simple fitting
[Fri Apr  6 00:46:40 2012] Initial guess for spatial extent in simple fitting = 8.63"
[Fri Apr  6 00:46:40 2012] source mask rpix=2.0, npix_max = 24, mask sum = 19, frac = 0.769
[Fri Apr  6 00:46:40 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 8.63"
[Fri Apr  6 00:59:51 2012] fullrun_mos2_xmm0505381901_pi300-10000_cl_pass1_src8.ximg exists
[Fri Apr  6 00:59:51 2012] fullrun_mos2_xmm0505381901_pi300-10000_cl_pass1_src8_1.ximg exists
[Fri Apr  6 00:59:51 2012] Fit fullrun_mos2_xmm0505381901_pi300-10000_cl_pass1_src8 appears to have run properly
[Fri Apr  6 00:59:51 2012] fullrun_mos2_xmm0505381901_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Fri Apr  6 00:59:51 2012] fullrun_mos2_xmm0505381901_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Fri Apr  6 00:59:51 2012] Fit fullrun_mos2_xmm0505381901_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Fri Apr  6 00:59:56 2012] Spatial fit model total counts = 70.118500, observed total counts = 67.000000
[Fri Apr  6 00:59:56 2012] Offset between fit and detection position for source 13 = 0.772167 pixels
[Fri Apr  6 00:59:56 2012] 70.222400 total counts/ 52.711200 bgd. counts: snr = 2.411929
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.772167 pixels
  Position = (249.6, 261.3) = 23 33 15.98 -55 26 19.7
  Extent = 3.8 (2.2-9.6)", rotation angle = 0
  Source counts = 17.5 +/- 8.4
  Background counts = 52.7
  Rate = 0.002 +/- 0.0008
[Fri Apr  6 00:59:56 2012] Vigneting correction estimate = 1.000000
[Fri Apr  6 00:59:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Apr  6 00:59:56 2012] Assessing source extent using major axis lower bound
[Fri Apr  6 00:59:56 2012] Source does appear to be extended
[Fri Apr  6 00:59:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Apr  6 01:11:50 2012] XMMSAS src. selection expression = ellipse(21663.386600, 22687.679200, 230.517007, 230.517007, 0.000000, X, Y)
[Fri Apr  6 01:11:50 2012] Writing source region out to fullrun_mos2_xmm0505381901_pi300-10000_pass1_cl_src13_src.reg
[Fri Apr  6 01:11:50 2012] Extracting stamp from image fullrun_mos2_xmm0505381901_pi300-10000_cl_sm2.00.img.gz, (236, 248) - (263, 275)
[Fri Apr  6 01:11:50 2012] XMMSAS bgd. selection expression = annulus(21663.386600, 22687.679200, 384.195011, 768.390022, X, Y)
[Fri Apr  6 01:11:50 2012] Writing fullrun_mos2_xmm0505381901_pi300-10000_pass1_cl_src13.gif
[Fri Apr  6 01:12:56 2012] Mean detx,y = (3503.55, -6430.15) 
[Fri Apr  6 01:12:56 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Apr  6 01:13:02 2012] Binned source spectrum to 10 counts/bin
[Fri Apr  6 01:13:02 2012] Setting source spectrum file to fullrun_mos2_xmm0505381901_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Fri Apr  6 01:13:02 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505381901_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Fri Apr  6 01:14:24 2012] Not generating rmf since there are only 17 counts
[Fri Apr  6 01:14:24 2012] rmf not generated due to insufficient counts
[Fri Apr  6 01:15:01 2012] Updating aperture counts using extracted products
[Fri Apr  6 01:15:01 2012] Error reading totcts from fullrun_mos2_xmm0505381901_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Fri Apr  6 01:15:01 2012] Calculating source flux in energy range 0.30-8.00
[Fri Apr  6 01:15:01 2012] Using photon index=1.80, rate=0.00173, arf fullrun_mos2_xmm0505381901_pi300-10000_pass1_cl_src13.arf
[Fri Apr  6 01:15:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Apr  6 01:15:01 2012] Updating source flux to 4.3e-14
[Fri Apr  6 01:15:03 2012] Source 13 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Apr  6 01:15:04 2012] xmm0505381901/analysis//spectral/fullrun_mos2_xmm0505381901_pi300-10000_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete