[Mon Dec 19 10:11:13 2011] Detection parameters:
  Position = (265.1, 329.0) = 23 22 26.68 -55 21 9.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 22.7 +/- 6.4
  Background counts = 3.6
  Rate = 0.003 +/- 0.0008

[Mon Dec 19 10:11:14 2011] Off-axis axis estimate = 3.28'
[Mon Dec 19 10:56:06 2011] Using EEF radius (= 8.07 ")to estimate initial spatial extent for simple fitting
[Mon Dec 19 10:56:06 2011] Initial guess for spatial extent in simple fitting = 8.07"
[Mon Dec 19 10:56:06 2011] source mask rpix=1.9, npix_max = 22, mask sum = 16, frac = 0.721
[Mon Dec 19 10:56:06 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 8.07"
[Mon Dec 19 11:20:52 2011] fullrun_mos2_xmm0505381501_pi300-10000_cl_pass0_src10.ximg exists
[Mon Dec 19 11:20:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505381501_pi300-10000_cl_pass0_src10.csv
[Mon Dec 19 11:20:52 2011] fullrun_mos2_xmm0505381501_pi300-10000_cl_pass0_src10_1.ximg exists
[Mon Dec 19 11:20:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505381501_pi300-10000_cl_pass0_src10.csv
[Mon Dec 19 11:20:52 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505381501_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505381501_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 19 11:20:52 2011] fullrun_mos2_xmm0505381501_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Mon Dec 19 11:20:52 2011] fullrun_mos2_xmm0505381501_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Mon Dec 19 11:20:52 2011] Fit fullrun_mos2_xmm0505381501_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Mon Dec 19 11:20:59 2011] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 11.238981 pixels away
[Mon Dec 19 11:20:59 2011] Vigneting correction estimate = 1.000000
[Mon Dec 19 11:20:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 19 11:20:59 2011] Assessing source extent using major
[Mon Dec 19 11:20:59 2011] Source does appear to be extended
[Mon Dec 19 11:20:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 19 12:02:38 2011] Using EEF radius (= 8.07 ")to estimate initial spatial extent for simple fitting
[Mon Dec 19 12:02:38 2011] Initial guess for spatial extent in simple fitting = 8.07"
[Mon Dec 19 12:02:38 2011] source mask rpix=1.9, npix_max = 22, mask sum = 16, frac = 0.721
[Mon Dec 19 12:02:38 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 8.07"
[Mon Dec 19 12:22:31 2011] fullrun_mos2_xmm0505381501_pi300-10000_cl_pass1_src10.ximg exists
[Mon Dec 19 12:22:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505381501_pi300-10000_cl_pass1_src10.csv
[Mon Dec 19 12:22:31 2011] fullrun_mos2_xmm0505381501_pi300-10000_cl_pass1_src10_1.ximg exists
[Mon Dec 19 12:22:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505381501_pi300-10000_cl_pass1_src10.csv
[Mon Dec 19 12:22:31 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505381501_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505381501_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 19 12:22:31 2011] fullrun_mos2_xmm0505381501_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Mon Dec 19 12:22:31 2011] fullrun_mos2_xmm0505381501_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Mon Dec 19 12:22:31 2011] Fit fullrun_mos2_xmm0505381501_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Mon Dec 19 12:22:42 2011] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 62.026671 pixels away
[Mon Dec 19 12:22:42 2011] Spatial fit model total counts = 50.999200, observed total counts = 51.000000
[Mon Dec 19 12:22:42 2011] Offset between fit and detection position for source 7 = 0.384570 pixels
[Mon Dec 19 12:22:42 2011] 51.803300 total counts/ 38.063400 bgd. counts: snr = 2.227049
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.384570 pixels
  Position = (264.7, 329.1) = 23 22 26.88 -55 21 9.6
  Extent = 4.3 (2.3-7.1)", rotation angle = 0
  Source counts = 13.7 +/- 7.2
  Background counts = 38.1
  Rate = 0.001 +/- 0.0007
[Mon Dec 19 12:22:42 2011] Vigneting correction estimate = 1.000000
[Mon Dec 19 12:22:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 19 12:22:42 2011] Assessing source extent using major axis lower bound
[Mon Dec 19 12:22:42 2011] Source does appear to be extended
[Mon Dec 19 12:22:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 19 12:34:37 2011] XMMSAS src. selection expression = ellipse(22979.109400, 28583.742200, 257.677207, 257.677207, 0.000000, X, Y)
[Mon Dec 19 12:34:37 2011] Writing source region out to fullrun_mos2_xmm0505381501_pi300-10000_pass1_cl_src7_src.reg
[Mon Dec 19 12:34:37 2011] Extracting stamp from image fullrun_mos2_xmm0505381501_pi300-10000_cl_sm2.00.img.gz, (250, 314) - (279, 344)
[Mon Dec 19 12:34:37 2011] XMMSAS bgd. selection expression = annulus(22979.109400, 28583.742200, 429.462012, 858.924025, X, Y)
[Mon Dec 19 12:34:37 2011] Writing fullrun_mos2_xmm0505381501_pi300-10000_pass1_cl_src7.gif
[Mon Dec 19 12:36:49 2011] Mean detx,y = (5142.65, -1152.65) 
[Mon Dec 19 12:36:52 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Dec 19 12:37:00 2011] Binned source spectrum to 10 counts/bin
[Mon Dec 19 12:37:00 2011] Setting source spectrum file to fullrun_mos2_xmm0505381501_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Mon Dec 19 12:37:00 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0505381501_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Mon Dec 19 12:38:44 2011] Not generating rmf since there are only 13 counts
[Mon Dec 19 12:38:44 2011] rmf not generated due to insufficient counts
[Mon Dec 19 12:39:15 2011] Updating aperture counts using extracted products
[Mon Dec 19 12:39:15 2011] Error reading totcts from fullrun_mos2_xmm0505381501_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Mon Dec 19 12:39:16 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec 19 12:39:16 2011] Using photon index=1.80, rate=0.00136, arf fullrun_mos2_xmm0505381501_pi300-10000_pass1_cl_src7.arf
[Mon Dec 19 12:39:16 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec 19 12:39:16 2011] Updating source flux to 2.1e-14
[Mon Dec 19 12:39:19 2011] Source 7 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Dec 19 12:39:20 2011] xmm0505381501/analysis//spectral/fullrun_mos2_xmm0505381501_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete