[Mon Dec 19 10:11:13 2011] Detection parameters:
  Position = (224.4, 273.8) = 23 22 47.48 -55 25 5.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 45.7 +/- 8.0
  Background counts = 3.3
  Rate = 0.008 +/- 0.001

[Mon Dec 19 10:11:14 2011] Off-axis axis estimate = 5.66'
[Mon Dec 19 10:56:06 2011] Using EEF radius (= 9.26 ")to estimate initial spatial extent for simple fitting
[Mon Dec 19 10:56:06 2011] Initial guess for spatial extent in simple fitting = 9.26"
[Mon Dec 19 10:56:06 2011] source mask rpix=2.1, npix_max = 27, mask sum = 24, frac = 0.869
[Mon Dec 19 10:56:06 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 9.26"
[Mon Dec 19 11:20:51 2011] fullrun_mos2_xmm0505381501_pi300-10000_cl_pass0_src1.ximg exists
[Mon Dec 19 11:20:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505381501_pi300-10000_cl_pass0_src1.csv
[Mon Dec 19 11:20:51 2011] fullrun_mos2_xmm0505381501_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Dec 19 11:20:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505381501_pi300-10000_cl_pass0_src1.csv
[Mon Dec 19 11:20:51 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505381501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505381501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 19 11:20:52 2011] fullrun_mos2_xmm0505381501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Dec 19 11:20:52 2011] fullrun_mos2_xmm0505381501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Dec 19 11:20:52 2011] Fit fullrun_mos2_xmm0505381501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Dec 19 11:20:59 2011] Spatial fit model total counts = 67.998000, observed total counts = 68.000000
[Mon Dec 19 11:20:59 2011] Offset between fit and detection position for source 1 = 0.344532 pixels
[Mon Dec 19 11:20:59 2011] 67.216200 total counts/ 34.227600 bgd. counts: snr = 5.638657
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.344532 pixels
  Position = (224.3, 274.2) = 23 22 47.52 -55 25 8.2
  Extent = 4.5 (3.5-5.9)", rotation angle = 0
  Source counts = 33.0 +/- 8.2
  Background counts = 34.2
  Rate = 0.003 +/- 0.0008
[Mon Dec 19 11:20:59 2011] Vigneting correction estimate = 1.000000
[Mon Dec 19 11:20:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 19 11:20:59 2011] Assessing source extent using major axis lower bound
[Mon Dec 19 11:20:59 2011] Source does appear to be extended
[Mon Dec 19 11:20:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 19 12:02:38 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Dec 19 12:02:38 2011] Initial guess for spatial extent in simple fitting = 4.54"
[Mon Dec 19 12:02:38 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.945
[Mon Dec 19 12:02:38 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 4.54"
[Mon Dec 19 12:22:30 2011] fullrun_mos2_xmm0505381501_pi300-10000_cl_pass1_src1.ximg exists
[Mon Dec 19 12:22:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505381501_pi300-10000_cl_pass1_src1.csv
[Mon Dec 19 12:22:30 2011] fullrun_mos2_xmm0505381501_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Dec 19 12:22:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505381501_pi300-10000_cl_pass1_src1.csv
[Mon Dec 19 12:22:30 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505381501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505381501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 19 12:22:31 2011] fullrun_mos2_xmm0505381501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Dec 19 12:22:31 2011] fullrun_mos2_xmm0505381501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Dec 19 12:22:31 2011] Fit fullrun_mos2_xmm0505381501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Dec 19 12:22:42 2011] Warning, spatial fit 1 centroid is now closest to src. 7
[Mon Dec 19 12:22:42 2011] Vigneting correction estimate = 1.000000
[Mon Dec 19 12:22:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 19 12:22:42 2011] Assessing source extent using major axis lower bound
[Mon Dec 19 12:22:42 2011] Source does appear to be extended
[Mon Dec 19 12:22:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 19 12:34:37 2011] XMMSAS src. selection expression = ellipse(19469.343600, 23805.615800, 272.236208, 272.236208, 0.000000, X, Y)
[Mon Dec 19 12:34:37 2011] Writing source region out to fullrun_mos2_xmm0505381501_pi300-10000_pass1_cl_src1_src.reg
[Mon Dec 19 12:34:37 2011] Extracting stamp from image fullrun_mos2_xmm0505381501_pi300-10000_cl_sm2.00.img.gz, (209, 259) - (240, 290)
[Mon Dec 19 12:34:37 2011] XMMSAS bgd. selection expression = annulus(19469.343600, 23805.615800, 453.727013, 907.454026, X, Y)
[Mon Dec 19 12:34:37 2011] Writing fullrun_mos2_xmm0505381501_pi300-10000_pass1_cl_src1.gif
[Mon Dec 19 12:34:38 2011] Mean detx,y = (5252.67, -7057.19) 
[Mon Dec 19 12:34:39 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Dec 19 12:34:49 2011] Binned source spectrum to 10 counts/bin
[Mon Dec 19 12:34:49 2011] Setting source spectrum file to fullrun_mos2_xmm0505381501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Dec 19 12:34:49 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0505381501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Dec 19 12:38:13 2011] Not generating rmf since there are only 32 counts
[Mon Dec 19 12:38:13 2011] rmf not generated due to insufficient counts
[Mon Dec 19 12:39:15 2011] Updating aperture counts using extracted products
[Mon Dec 19 12:39:15 2011] Error reading totcts from fullrun_mos2_xmm0505381501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Dec 19 12:39:16 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec 19 12:39:16 2011] Using photon index=1.80, rate=0.00326, arf fullrun_mos2_xmm0505381501_pi300-10000_pass1_cl_src1.arf
[Mon Dec 19 12:39:16 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec 19 12:39:16 2011] Updating source flux to 7.1e-14
[Mon Dec 19 12:39:19 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Dec 19 12:39:20 2011] xmm0505381501/analysis//spectral/fullrun_mos2_xmm0505381501_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete