[Tue Mar 13 13:01:30 2012] Detection parameters:
  Position = (266.8, 220.8) = 23 19 46.12 -55 28 38.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 127.9 +/- 13.8
  Background counts = 5.4
  Rate = 0.01 +/- 0.001

[Tue Mar 13 13:01:31 2012] Off-axis axis estimate = 6.08'
[Tue Mar 13 14:59:25 2012] Using EEF radius (= 9.47 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 14:59:25 2012] Initial guess for spatial extent in simple fitting = 9.47"
[Tue Mar 13 14:59:25 2012] source mask rpix=2.2, npix_max = 28, mask sum = 23, frac = 0.803
[Tue Mar 13 14:59:25 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 9.47"
[Tue Mar 13 15:41:10 2012] fullrun_mos2_xmm0505381401_pi300-10000_cl_pass0_src1.ximg exists
[Tue Mar 13 15:41:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505381401_pi300-10000_cl_pass0_src1.csv
[Tue Mar 13 15:41:10 2012] fullrun_mos2_xmm0505381401_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Mar 13 15:41:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505381401_pi300-10000_cl_pass0_src1.csv
[Tue Mar 13 15:41:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505381401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505381401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 15:41:11 2012] fullrun_mos2_xmm0505381401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Mar 13 15:41:11 2012] fullrun_mos2_xmm0505381401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Mar 13 15:41:11 2012] Fit fullrun_mos2_xmm0505381401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Mar 13 15:41:31 2012] Spatial fit model total counts = 185.115000, observed total counts = 177.000000
[Tue Mar 13 15:41:31 2012] Offset between fit and detection position for source 1 = 0.148998 pixels
[Tue Mar 13 15:41:31 2012] 183.336900 total counts/ 68.418900 bgd. counts: snr = 13.893127
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.148998 pixels
  Position = (266.9, 220.7) = 23 19 46.07 -55 28 39.1
  Extent = 7.5 (6.2-8.9)", rotation angle = 0
  Source counts = 114.9 +/- 13.5
  Background counts = 68.4
  Rate = 0.008 +/- 0.001
[Tue Mar 13 15:41:31 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 15:41:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 15:41:31 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 15:41:31 2012] Source does appear to be extended
[Tue Mar 13 15:41:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 17:22:07 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 13 17:22:07 2012] Initial guess for spatial extent in simple fitting = 7.50"
[Tue Mar 13 17:22:07 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.809
[Tue Mar 13 17:22:07 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.50"
[Tue Mar 13 17:56:05 2012] fullrun_mos2_xmm0505381401_pi300-10000_cl_pass1_src1.ximg exists
[Tue Mar 13 17:56:05 2012] fullrun_mos2_xmm0505381401_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Mar 13 17:56:05 2012] Fit fullrun_mos2_xmm0505381401_pi300-10000_cl_pass1_src1 appears to have run properly
[Tue Mar 13 17:56:05 2012] fullrun_mos2_xmm0505381401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Mar 13 17:56:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505381401_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue Mar 13 17:56:05 2012] fullrun_mos2_xmm0505381401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Mar 13 17:56:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505381401_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue Mar 13 17:56:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505381401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505381401_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 17:56:23 2012] Warning, spatial fit 1 centroid is now closest to src. 13
[Tue Mar 13 17:56:23 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 17:56:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 17:56:23 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 17:56:23 2012] Source does appear to be extended
[Tue Mar 13 17:56:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 18:48:17 2012] XMMSAS src. selection expression = ellipse(23173.796800, 19154.441800, 449.769810, 449.769810, 0.000000, X, Y)
[Tue Mar 13 18:48:17 2012] Writing source region out to fullrun_mos2_xmm0505381401_pi300-10000_pass1_cl_src1_src.reg
[Tue Mar 13 18:48:17 2012] Extracting stamp from image fullrun_mos2_xmm0505381401_pi300-10000_cl_sm2.00.img.gz, (241, 195) - (293, 247)
[Tue Mar 13 18:48:17 2012] XMMSAS bgd. selection expression = annulus(23173.796800, 19154.441800, 749.616350, 1499.232699, X, Y)
[Tue Mar 13 18:48:17 2012] Writing fullrun_mos2_xmm0505381401_pi300-10000_pass1_cl_src1.gif
[Tue Mar 13 18:48:20 2012] Mean detx,y = (-2139.11, -8125.14) 
[Tue Mar 13 18:48:22 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Mar 13 18:48:38 2012] Binned source spectrum to 10 counts/bin
[Tue Mar 13 18:48:39 2012] Setting source spectrum file to fullrun_mos2_xmm0505381401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Mar 13 18:48:39 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505381401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Mar 13 19:01:46 2012] Updating aperture counts using extracted products
[Tue Mar 13 19:01:47 2012] Error reading totcts from fullrun_mos2_xmm0505381401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Mar 13 19:01:48 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 19:01:48 2012] Using photon index=1.80, rate=0.00809, arf fullrun_mos2_xmm0505381401_pi300-10000_pass1_cl_src1.arf
[Tue Mar 13 19:01:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 19:01:48 2012] Updating source flux to 1.2e-13
[Tue Mar 13 19:02:04 2012] Reading fit data from xmm0505381401/analysis//spectral/fullrun_mos2_xmm0505381401_pi300-10000_pass1_cl_src1_pl.csv
[Tue Mar 13 19:02:04 2012] Spectral fit parameter nH value = 1.39085e+21
[Tue Mar 13 19:02:04 2012] Spectral fit parameter PhoIndex value = 2.41934
[Tue Mar 13 19:02:04 2012] Failed to get F(0.3-8.0) from xmm0505381401/analysis//spectral/fullrun_mos2_xmm0505381401_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Mar 13 19:02:04 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 19:02:04 2012] Using Nh = 1.4e+21, photon index=2.42, rate=0.00809, arf fullrun_mos2_xmm0505381401_pi300-10000_pass1_cl_src1.arf
[Tue Mar 13 19:02:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 19:02:04 2012] Updating source flux to 1e-13