[Tue Mar 13 13:00:51 2012] Detection parameters:
  Position = (204.4, 313.9) = 23 20 17.90 -55 21 52.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 46.9 +/- 8.7
  Background counts = 5.0
  Rate = 0.006 +/- 0.001

[Tue Mar 13 13:00:51 2012] Off-axis axis estimate = 6.91'
[Tue Mar 13 14:14:59 2012] Using EEF radius (= 9.88 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 14:14:59 2012] Initial guess for spatial extent in simple fitting = 9.88"
[Tue Mar 13 14:14:59 2012] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.976
[Tue Mar 13 14:14:59 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 9.88"
[Tue Mar 13 14:59:25 2012] fullrun_mos1_xmm0505381401_pi300-10000_cl_pass0_src3.ximg exists
[Tue Mar 13 14:59:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505381401_pi300-10000_cl_pass0_src3.csv
[Tue Mar 13 14:59:25 2012] fullrun_mos1_xmm0505381401_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue Mar 13 14:59:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505381401_pi300-10000_cl_pass0_src3.csv
[Tue Mar 13 14:59:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505381401_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505381401_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 14:59:25 2012] fullrun_mos1_xmm0505381401_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue Mar 13 14:59:25 2012] fullrun_mos1_xmm0505381401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Mar 13 14:59:25 2012] Fit fullrun_mos1_xmm0505381401_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Tue Mar 13 15:41:27 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 11.514267 pixels away
[Tue Mar 13 15:41:27 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 15:41:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 15:41:27 2012] Assessing source extent using major
[Tue Mar 13 15:41:27 2012] Source does appear to be extended
[Tue Mar 13 15:41:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 16:47:12 2012] Using EEF radius (= 9.88 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 16:47:12 2012] Initial guess for spatial extent in simple fitting = 9.88"
[Tue Mar 13 16:47:12 2012] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.976
[Tue Mar 13 16:47:12 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 9.88"
[Tue Mar 13 17:22:06 2012] fullrun_mos1_xmm0505381401_pi300-10000_cl_pass1_src3.ximg exists
[Tue Mar 13 17:22:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505381401_pi300-10000_cl_pass1_src3.csv
[Tue Mar 13 17:22:06 2012] fullrun_mos1_xmm0505381401_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue Mar 13 17:22:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505381401_pi300-10000_cl_pass1_src3.csv
[Tue Mar 13 17:22:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505381401_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505381401_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 17:22:06 2012] fullrun_mos1_xmm0505381401_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue Mar 13 17:22:06 2012] fullrun_mos1_xmm0505381401_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Mar 13 17:22:06 2012] Fit fullrun_mos1_xmm0505381401_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Tue Mar 13 17:56:18 2012] Spatial fit model total counts = 88.993000, observed total counts = 89.000000
[Tue Mar 13 17:56:18 2012] Offset between fit and detection position for source 6 = 0.024934 pixels
[Tue Mar 13 17:56:18 2012] 87.707700 total counts/ 59.811500 bgd. counts: snr = 3.607054
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.024934 pixels
  Position = (204.5, 313.9) = 23 20 17.89 -55 21 53.1
  Extent = 3.7 (2.8-5.4)", rotation angle = 0
  Source counts = 27.9 +/- 9.4
  Background counts = 59.8
  Rate = 0.002 +/- 0.0007
[Tue Mar 13 17:56:18 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 17:56:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 17:56:18 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 17:56:18 2012] Source does appear to be extended
[Tue Mar 13 17:56:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 18:41:32 2012] XMMSAS src. selection expression = ellipse(17739.442000, 27263.912400, 221.204406, 221.204406, 0.000000, X, Y)
[Tue Mar 13 18:41:32 2012] Writing source region out to fullrun_mos1_xmm0505381401_pi300-10000_pass1_cl_src6_src.reg
[Tue Mar 13 18:41:32 2012] Extracting stamp from image fullrun_mos1_xmm0505381401_pi300-10000_cl_sm2.00.img.gz, (192, 301) - (217, 327)
[Tue Mar 13 18:41:32 2012] XMMSAS bgd. selection expression = annulus(17739.442000, 27263.912400, 368.674011, 737.348021, X, Y)
[Tue Mar 13 18:41:32 2012] Writing fullrun_mos1_xmm0505381401_pi300-10000_pass1_cl_src6.gif
[Tue Mar 13 18:42:17 2012] Mean detx,y = (-6690.76, -7757.33) 
[Tue Mar 13 18:42:19 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Mar 13 18:42:30 2012] Binned source spectrum to 10 counts/bin
[Tue Mar 13 18:42:31 2012] Setting source spectrum file to fullrun_mos1_xmm0505381401_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Tue Mar 13 18:42:31 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505381401_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Tue Mar 13 18:47:16 2012] Not generating rmf since there are only 27 counts
[Tue Mar 13 18:47:16 2012] rmf not generated due to insufficient counts
[Tue Mar 13 19:01:45 2012] Updating aperture counts using extracted products
[Tue Mar 13 19:01:45 2012] Error reading totcts from fullrun_mos1_xmm0505381401_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Tue Mar 13 19:01:46 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 19:01:46 2012] Using photon index=1.80, rate=0.00197, arf fullrun_mos1_xmm0505381401_pi300-10000_pass1_cl_src6.arf
[Tue Mar 13 19:01:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 19:01:46 2012] Updating source flux to 5.1e-14
[Tue Mar 13 19:01:50 2012] Source 6 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Mar 13 19:01:51 2012] xmm0505381401/analysis//spectral/fullrun_mos1_xmm0505381401_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete