[Tue Mar 13 13:00:50 2012] Detection parameters:
  Position = (324.0, 346.2) = 23 19 16.88 -55 19 32.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 71.3 +/- 11.0
  Background counts = 5.9
  Rate = 0.006 +/- 0.0009

[Tue Mar 13 13:00:51 2012] Off-axis axis estimate = 3.93'
[Tue Mar 13 14:14:59 2012] Using EEF radius (= 8.39 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 14:14:59 2012] Initial guess for spatial extent in simple fitting = 8.39"
[Tue Mar 13 14:14:59 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.847
[Tue Mar 13 14:14:59 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 8.39"
[Tue Mar 13 14:59:25 2012] fullrun_mos1_xmm0505381401_pi300-10000_cl_pass0_src5.ximg exists
[Tue Mar 13 14:59:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505381401_pi300-10000_cl_pass0_src5.csv
[Tue Mar 13 14:59:25 2012] fullrun_mos1_xmm0505381401_pi300-10000_cl_pass0_src5_1.ximg exists
[Tue Mar 13 14:59:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505381401_pi300-10000_cl_pass0_src5.csv
[Tue Mar 13 14:59:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505381401_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505381401_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 14:59:25 2012] fullrun_mos1_xmm0505381401_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Tue Mar 13 14:59:25 2012] fullrun_mos1_xmm0505381401_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Tue Mar 13 14:59:25 2012] Fit fullrun_mos1_xmm0505381401_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Tue Mar 13 15:41:27 2012] Source 4 is offset by 7.761600 and -6.132449 pixels which is larger than
2 X fitted extent = 0.964685 x 0.964685, not incorporating fit results
[Tue Mar 13 15:41:27 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 15:41:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 15:41:27 2012] Assessing source extent using major
[Tue Mar 13 15:41:27 2012] Source does appear to be extended
[Tue Mar 13 15:41:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 16:47:12 2012] Using EEF radius (= 8.39 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 16:47:12 2012] Initial guess for spatial extent in simple fitting = 8.39"
[Tue Mar 13 16:47:12 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.847
[Tue Mar 13 16:47:12 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 8.39"
[Tue Mar 13 17:22:06 2012] fullrun_mos1_xmm0505381401_pi300-10000_cl_pass1_src5.ximg exists
[Tue Mar 13 17:22:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505381401_pi300-10000_cl_pass1_src5.csv
[Tue Mar 13 17:22:06 2012] fullrun_mos1_xmm0505381401_pi300-10000_cl_pass1_src5_1.ximg exists
[Tue Mar 13 17:22:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505381401_pi300-10000_cl_pass1_src5.csv
[Tue Mar 13 17:22:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505381401_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505381401_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 17:22:06 2012] fullrun_mos1_xmm0505381401_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Tue Mar 13 17:22:06 2012] fullrun_mos1_xmm0505381401_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Tue Mar 13 17:22:06 2012] Fit fullrun_mos1_xmm0505381401_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Tue Mar 13 17:56:18 2012] Spatial fit model total counts = 206.620000, observed total counts = 202.000000
[Tue Mar 13 17:56:18 2012] Offset between fit and detection position for source 4 = 0.281232 pixels
[Tue Mar 13 17:56:18 2012] 207.384100 total counts/ 153.129000 bgd. counts: snr = 4.384417
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.281232 pixels
  Position = (323.8, 346.3) = 23 19 17.02 -55 19 32.9
  Extent = 7.9 (5.0-11.0)", rotation angle = 0
  Source counts = 54.3 +/- 14.4
  Background counts = 153.1
  Rate = 0.004 +/- 0.001
[Tue Mar 13 17:56:18 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 17:56:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 17:56:18 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 17:56:18 2012] Source does appear to be extended
[Tue Mar 13 17:56:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 18:41:32 2012] XMMSAS src. selection expression = ellipse(28120.602000, 30078.899800, 471.150014, 471.150014, 0.000000, X, Y)
[Tue Mar 13 18:41:32 2012] Writing source region out to fullrun_mos1_xmm0505381401_pi300-10000_pass1_cl_src4_src.reg
[Tue Mar 13 18:41:32 2012] Extracting stamp from image fullrun_mos1_xmm0505381401_pi300-10000_cl_sm2.00.img.gz, (297, 319) - (351, 373)
[Tue Mar 13 18:41:32 2012] XMMSAS bgd. selection expression = annulus(28120.602000, 30078.899800, 785.250023, 1570.500045, X, Y) && !ellipse(27374.648680, 30614.536000, 363.590410, 363.590410, 0.000000, X, Y)
[Tue Mar 13 18:41:32 2012] Writing fullrun_mos1_xmm0505381401_pi300-10000_pass1_cl_src4.gif
[Tue Mar 13 18:42:53 2012] Mean detx,y = (2983.96, -3056.31) 
[Tue Mar 13 18:42:55 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Mar 13 18:43:08 2012] Binned source spectrum to 10 counts/bin
[Tue Mar 13 18:43:08 2012] Setting source spectrum file to fullrun_mos1_xmm0505381401_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Tue Mar 13 18:43:08 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505381401_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Tue Mar 13 18:47:27 2012] Not generating rmf since there are only 54 counts
[Tue Mar 13 18:47:27 2012] rmf not generated due to insufficient counts
[Tue Mar 13 19:01:45 2012] Updating aperture counts using extracted products
[Tue Mar 13 19:01:45 2012] Error reading totcts from fullrun_mos1_xmm0505381401_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Tue Mar 13 19:01:46 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 19:01:46 2012] Using photon index=1.80, rate=0.00383, arf fullrun_mos1_xmm0505381401_pi300-10000_pass1_cl_src4.arf
[Tue Mar 13 19:01:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 19:01:46 2012] Updating source flux to 4.6e-14
[Tue Mar 13 19:01:50 2012] Flag b found in src. 4 procflags, skipping spectral fitting
[Tue Mar 13 19:01:50 2012] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Mar 13 19:01:51 2012] xmm0505381401/analysis//spectral/fullrun_mos1_xmm0505381401_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete