[Tue Mar 13 13:00:51 2012] Detection parameters:
  Position = (334.4, 203.9) = 23 19 11.52 -55 29 52.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 37.2 +/- 7.8
  Background counts = 6.0
  Rate = 0.004 +/- 0.0008

[Tue Mar 13 13:00:51 2012] Off-axis axis estimate = 7.33'
[Tue Mar 13 14:14:59 2012] Using EEF radius (= 10.09 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 14:14:59 2012] Initial guess for spatial extent in simple fitting = 10.09"
[Tue Mar 13 14:14:59 2012] source mask rpix=2.3, npix_max = 31, mask sum = 29, frac = 0.911
[Tue Mar 13 14:14:59 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 10.09"
[Tue Mar 13 14:59:25 2012] fullrun_mos1_xmm0505381401_pi300-10000_cl_pass0_src7.ximg exists
[Tue Mar 13 14:59:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505381401_pi300-10000_cl_pass0_src7.csv
[Tue Mar 13 14:59:25 2012] fullrun_mos1_xmm0505381401_pi300-10000_cl_pass0_src7_1.ximg exists
[Tue Mar 13 14:59:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505381401_pi300-10000_cl_pass0_src7.csv
[Tue Mar 13 14:59:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505381401_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505381401_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 14:59:25 2012] fullrun_mos1_xmm0505381401_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Tue Mar 13 14:59:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505381401_pi300-10000_cl_pass0_tfrozen_src7.csv
[Tue Mar 13 14:59:25 2012] fullrun_mos1_xmm0505381401_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Tue Mar 13 14:59:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505381401_pi300-10000_cl_pass0_tfrozen_src7.csv
[Tue Mar 13 14:59:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505381401_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505381401_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 15:41:27 2012] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 12.793135 pixels away
[Tue Mar 13 15:41:27 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 15:41:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 15:41:27 2012] Assessing source extent using major
[Tue Mar 13 15:41:27 2012] Source does appear to be extended
[Tue Mar 13 15:41:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 16:47:12 2012] Using EEF radius (= 10.09 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 16:47:12 2012] Initial guess for spatial extent in simple fitting = 10.09"
[Tue Mar 13 16:47:12 2012] source mask rpix=2.3, npix_max = 31, mask sum = 29, frac = 0.911
[Tue Mar 13 16:47:12 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 10.09"
[Tue Mar 13 17:22:06 2012] fullrun_mos1_xmm0505381401_pi300-10000_cl_pass1_src7.ximg exists
[Tue Mar 13 17:22:06 2012] fullrun_mos1_xmm0505381401_pi300-10000_cl_pass1_src7_1.ximg exists
[Tue Mar 13 17:22:06 2012] Fit fullrun_mos1_xmm0505381401_pi300-10000_cl_pass1_src7 appears to have run properly
[Tue Mar 13 17:22:06 2012] fullrun_mos1_xmm0505381401_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Tue Mar 13 17:22:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505381401_pi300-10000_cl_pass1_tfrozen_src7.csv
[Tue Mar 13 17:22:06 2012] fullrun_mos1_xmm0505381401_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Tue Mar 13 17:22:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505381401_pi300-10000_cl_pass1_tfrozen_src7.csv
[Tue Mar 13 17:22:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505381401_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505381401_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 17:56:18 2012] Spatial fit model total counts = 94.670900, observed total counts = 95.000000
[Tue Mar 13 17:56:18 2012] Offset between fit and detection position for source 13 = 0.787634 pixels
[Tue Mar 13 17:56:18 2012] 95.650700 total counts/ 82.113100 bgd. counts: snr = 1.493948
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.787634 pixels
  Position = (334.2, 203.2) = 23 19 11.64 -55 29 55.3
  Extent = 3.6" x 2.6", rotation angle = 319
  Source counts = 13.5 +/- 9.8
  Background counts = 82.1
  Rate = 0.001 +/- 0.0007
  Deleting source due to low Poisson probability