[Tue Mar 13 13:00:51 2012] Detection parameters:
  Position = (380.5, 211.8) = 23 18 47.94 -55 29 18.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 89.9 +/- 12.2
  Background counts = 6.0
  Rate = 0.009 +/- 0.001

[Tue Mar 13 13:00:51 2012] Off-axis axis estimate = 8.65'
[Tue Mar 13 14:14:59 2012] Using EEF radius (= 10.75 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 14:14:59 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Mar 13 14:14:59 2012] Initial guess for spatial extent in simple fitting = 10.75"
[Tue Mar 13 14:14:59 2012] source mask rpix=2.5, npix_max = 35, mask sum = 30, frac = 0.849
[Tue Mar 13 14:14:59 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.75"
[Tue Mar 13 14:59:25 2012] fullrun_mos1_xmm0505381401_pi300-10000_cl_pass0_src1.ximg exists
[Tue Mar 13 14:59:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505381401_pi300-10000_cl_pass0_src1.csv
[Tue Mar 13 14:59:25 2012] fullrun_mos1_xmm0505381401_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Mar 13 14:59:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505381401_pi300-10000_cl_pass0_src1.csv
[Tue Mar 13 14:59:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505381401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505381401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 14:59:25 2012] fullrun_mos1_xmm0505381401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Mar 13 14:59:25 2012] fullrun_mos1_xmm0505381401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Mar 13 14:59:25 2012] Fit fullrun_mos1_xmm0505381401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Mar 13 15:41:27 2012] Spatial fit model total counts = 214.646000, observed total counts = 215.000000
[Tue Mar 13 15:41:27 2012] Offset between fit and detection position for source 11 = 0.391527 pixels
[Tue Mar 13 15:41:27 2012] 168.205200 total counts/ 100.835000 bgd. counts: snr = 6.709068
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.391527 pixels
  Position = (380.1, 211.7) = 23 18 48.13 -55 29 18.1
  Extent = 6.4 (5.2-8.1)", rotation angle = 0
  Source counts = 67.4 +/- 13.0
  Background counts = 100.8
  Rate = 0.005 +/- 0.0009
[Tue Mar 13 15:41:27 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 15:41:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 15:41:27 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 15:41:27 2012] Source does appear to be extended
[Tue Mar 13 15:41:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 15:41:27 2012] Source is confused with source 10
[Tue Mar 13 16:47:12 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 13 16:47:12 2012] Initial guess for spatial extent in simple fitting = 6.41"
[Tue Mar 13 16:47:12 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.028
[Tue Mar 13 16:47:12 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.41"
[Tue Mar 13 17:22:06 2012] fullrun_mos1_xmm0505381401_pi300-10000_cl_pass1_src1.ximg exists
[Tue Mar 13 17:22:06 2012] fullrun_mos1_xmm0505381401_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Mar 13 17:22:06 2012] Fit fullrun_mos1_xmm0505381401_pi300-10000_cl_pass1_src1 appears to have run properly
[Tue Mar 13 17:22:06 2012] fullrun_mos1_xmm0505381401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Mar 13 17:22:06 2012] fullrun_mos1_xmm0505381401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Mar 13 17:22:06 2012] Fit fullrun_mos1_xmm0505381401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Mar 13 17:56:18 2012] Spatial fit model total counts = 170.000000, observed total counts = 170.000000
[Tue Mar 13 17:56:18 2012] Offset between fit and detection position for source 11 = 0.026902 pixels
[Tue Mar 13 17:56:18 2012] 137.290800 total counts/ 70.939700 bgd. counts: snr = 7.877773
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.026902 pixels
  Position = (380.1, 211.7) = 23 18 48.14 -55 29 18.0
  Extent = 6.4 (5.1-8.1)", rotation angle = 0
  Source counts = 66.4 +/- 11.7
  Background counts = 70.9
  Rate = 0.005 +/- 0.0008
[Tue Mar 13 17:56:18 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 17:56:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 17:56:18 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 17:56:18 2012] Source does appear to be extended
[Tue Mar 13 17:56:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 18:41:32 2012] XMMSAS src. selection expression = ellipse(33020.974620, 18367.901400, 381.980411, 381.980411, 0.000000, X, Y)
[Tue Mar 13 18:41:32 2012] Writing source region out to fullrun_mos1_xmm0505381401_pi300-10000_pass1_cl_src11_src.reg
[Tue Mar 13 18:41:32 2012] Extracting stamp from image fullrun_mos1_xmm0505381401_pi300-10000_cl_sm2.00.img.gz, (358, 190) - (402, 234)
[Tue Mar 13 18:41:32 2012] XMMSAS bgd. selection expression = annulus(33020.974620, 18367.901400, 636.634018, 1273.268037, X, Y) && !ellipse(33521.847076, 18327.213974, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Mar 13 18:41:32 2012] Writing fullrun_mos1_xmm0505381401_pi300-10000_pass1_cl_src11.gif
[Tue Mar 13 18:41:36 2012] Mean detx,y = (-1011.02, 8989.39) 
[Tue Mar 13 18:41:38 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Mar 13 18:41:55 2012] Binned source spectrum to 10 counts/bin
[Tue Mar 13 18:41:55 2012] Setting source spectrum file to fullrun_mos1_xmm0505381401_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Tue Mar 13 18:41:55 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505381401_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Tue Mar 13 18:47:03 2012] Not generating rmf since there are only 66 counts
[Tue Mar 13 18:47:03 2012] rmf not generated due to insufficient counts
[Tue Mar 13 19:01:45 2012] Updating aperture counts using extracted products
[Tue Mar 13 19:01:45 2012] Error reading totcts from fullrun_mos1_xmm0505381401_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Tue Mar 13 19:01:46 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 19:01:46 2012] Using photon index=1.80, rate=0.00468, arf fullrun_mos1_xmm0505381401_pi300-10000_pass1_cl_src11.arf
[Tue Mar 13 19:01:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 19:01:46 2012] Updating source flux to 7.5e-14
[Tue Mar 13 19:01:50 2012] Flag c found in src. 11 procflags, skipping spectral fitting
[Tue Mar 13 19:01:50 2012] Source 11 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Mar 13 19:01:51 2012] xmm0505381401/analysis//spectral/fullrun_mos1_xmm0505381401_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete