[Sun Mar 11 07:55:53 2012] Detection parameters:
  Position = (283.5, 358.4) = 23 37 9.04 -55 41 14.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 153.6 +/- 31.7
  Background counts = 519.3
  Rate = 0.01 +/- 0.002

[Sun Mar 11 07:55:54 2012] Off-axis axis estimate = 4.48'
[Sun Mar 11 08:00:09 2012] Using EEF radius (= 8.67 ")to estimate initial spatial extent for simple fitting
[Sun Mar 11 08:00:09 2012] Initial guess for spatial extent in simple fitting = 8.67"
[Sun Mar 11 08:00:09 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.006
[Sun Mar 11 08:00:09 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 8.67"
[Sun Mar 11 08:23:22 2012] fullrun_pn_xmm0505381301_pi300-10000_cl_pass0_src7.ximg exists
[Sun Mar 11 08:23:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505381301_pi300-10000_cl_pass0_src7.csv
[Sun Mar 11 08:23:22 2012] fullrun_pn_xmm0505381301_pi300-10000_cl_pass0_src7_1.ximg exists
[Sun Mar 11 08:23:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505381301_pi300-10000_cl_pass0_src7.csv
[Sun Mar 11 08:23:22 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505381301_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505381301_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 11 08:23:22 2012] fullrun_pn_xmm0505381301_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Sun Mar 11 08:23:22 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0505381301_pi300-10000_cl_pass0_tfrozen_src7.csv
[Sun Mar 11 08:23:22 2012] fullrun_pn_xmm0505381301_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Sun Mar 11 08:23:22 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0505381301_pi300-10000_cl_pass0_tfrozen_src7.csv
[Sun Mar 11 08:23:22 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505381301_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505381301_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 11 09:36:24 2012] Source 8 is offset by 8.507330 and -5.220420 pixels which is larger than
2 X fitted extent = 1.128704 x 1.128704, not incorporating fit results
[Sun Mar 11 09:36:24 2012] Vigneting correction estimate = 1.000000
[Sun Mar 11 09:36:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 11 09:36:24 2012] Assessing source extent using major
[Sun Mar 11 09:36:24 2012] Source does appear to be extended
[Sun Mar 11 09:36:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 11 09:36:38 2012] Using EEF radius (= 8.67 ")to estimate initial spatial extent for simple fitting
[Sun Mar 11 09:36:38 2012] Initial guess for spatial extent in simple fitting = 8.67"
[Sun Mar 11 09:36:38 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.006
[Sun Mar 11 09:36:38 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 8.67"
[Sun Mar 11 10:00:03 2012] fullrun_pn_xmm0505381301_pi300-10000_cl_pass1_src7.ximg exists
[Sun Mar 11 10:00:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505381301_pi300-10000_cl_pass1_src7.csv
[Sun Mar 11 10:00:03 2012] fullrun_pn_xmm0505381301_pi300-10000_cl_pass1_src7_1.ximg exists
[Sun Mar 11 10:00:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505381301_pi300-10000_cl_pass1_src7.csv
[Sun Mar 11 10:00:03 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505381301_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505381301_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 11 10:00:03 2012] fullrun_pn_xmm0505381301_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Sun Mar 11 10:00:03 2012] fullrun_pn_xmm0505381301_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Sun Mar 11 10:00:03 2012] Fit fullrun_pn_xmm0505381301_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Sun Mar 11 11:24:00 2012] Source 8 is offset by 6.068571 and -4.349454 pixels which is larger than
2 X fitted extent = 1.008267 x 1.008267, not incorporating fit results
[Sun Mar 11 11:24:00 2012] Vigneting correction estimate = 1.000000
[Sun Mar 11 11:24:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 11 11:24:00 2012] Assessing source extent using major
[Sun Mar 11 11:24:00 2012] Source does appear to be extended
[Sun Mar 11 11:24:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 11 11:24:22 2012] XMMSAS src. selection expression = ellipse(24619.111694, 31134.123474, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Mar 11 11:24:22 2012] Writing source region out to fullrun_pn_xmm0505381301_pi300-10000_pass1_cl_src8_src.reg
[Sun Mar 11 11:24:22 2012] Extracting stamp from image fullrun_pn_xmm0505381301_pi300-10000_cl_sm2.00.img.gz, (246, 321) - (321, 396)
[Sun Mar 11 11:24:22 2012] XMMSAS bgd. selection expression = annulus(24619.111694, 31134.123474, 1087.500000, 2175.000000, X, Y) && !ellipse(24973.951050, 28204.431396, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22617.118713, 33940.534576, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25725.658875, 29675.304352, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25808.424103, 28757.564270, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Mar 11 11:24:22 2012] Writing fullrun_pn_xmm0505381301_pi300-10000_pass1_cl_src8.gif
[Sun Mar 11 11:44:46 2012] Mean detx,y = (-6017.84, -468.80) 
[Sun Mar 11 11:44:51 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar 11 11:45:32 2012] Binned source spectrum to 10 counts/bin
[Sun Mar 11 11:45:33 2012] Setting source spectrum file to fullrun_pn_xmm0505381301_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Sun Mar 11 11:45:33 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505381301_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Sun Mar 11 11:53:37 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Mar 11 11:53:37 2012] rmf not generated due to insufficient counts
[Sun Mar 11 12:55:37 2012] Updating aperture counts using extracted products
[Sun Mar 11 12:55:37 2012] Error reading totcts from fullrun_pn_xmm0505381301_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Sun Mar 11 12:55:38 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar 11 12:55:38 2012] Using photon index=1.80, rate=0.0119, arf fullrun_pn_xmm0505381301_pi300-10000_pass1_cl_src8.arf
[Sun Mar 11 12:55:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar 11 12:55:38 2012] Updating source flux to 4.3e-14
[Sun Mar 11 12:57:16 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Mar 11 12:57:17 2012] xmm0505381301/analysis//spectral/fullrun_pn_xmm0505381301_pi300-10000_pass1_cl_src8_pl.csv not found, spectral fit skipped or did not complete