[Sun Mar 11 07:56:40 2012] Detection parameters:
  Position = (309.1, 205.9) = 23 36 55.87 -55 52 21.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 82.5 +/- 16.6
  Background counts = 73.0
  Rate = 0.005 +/- 0.0009

[Sun Mar 11 07:56:40 2012] Off-axis axis estimate = 6.75'
[Sun Mar 11 08:54:15 2012] Using EEF radius (= 9.81 ")to estimate initial spatial extent for simple fitting
[Sun Mar 11 08:54:15 2012] Initial guess for spatial extent in simple fitting = 9.81"
[Sun Mar 11 08:54:15 2012] source mask rpix=2.3, npix_max = 30, mask sum = 36, frac = 1.187
[Sun Mar 11 08:54:15 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 9.81"
[Sun Mar 11 09:36:20 2012] fullrun_mos2_xmm0505381301_pi300-10000_cl_pass0_src10.ximg exists
[Sun Mar 11 09:36:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505381301_pi300-10000_cl_pass0_src10.csv
[Sun Mar 11 09:36:20 2012] fullrun_mos2_xmm0505381301_pi300-10000_cl_pass0_src10_1.ximg exists
[Sun Mar 11 09:36:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505381301_pi300-10000_cl_pass0_src10.csv
[Sun Mar 11 09:36:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505381301_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505381301_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 11 09:36:21 2012] fullrun_mos2_xmm0505381301_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Sun Mar 11 09:36:21 2012] fullrun_mos2_xmm0505381301_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Sun Mar 11 09:36:21 2012] Fit fullrun_mos2_xmm0505381301_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Sun Mar 11 09:36:31 2012] Spatial fit model total counts = 213.468000, observed total counts = 207.000000
[Sun Mar 11 09:36:31 2012] Offset between fit and detection position for source 21 = 1.074672 pixels
[Sun Mar 11 09:36:31 2012] 211.019630 total counts/ 203.683000 bgd. counts: snr = 0.514066
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 1.074672 pixels
  Position = (308.0, 206.0) = 23 36 56.42 -55 52 21.2
  Extent = 3.2 (2.5-6.6)", rotation angle = 0
  Source counts = 7.3 +/- 14.5
  Background counts = 203.7
  Rate = 0.0005 +/- 0.001
  Deleting source due to low Poisson probability