[Sun Mar 11 07:56:15 2012] Detection parameters: Position = (285.6, 481.4) = 23 37 7.93 -55 32 19.1 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 101.2 +/- 18.3 Background counts = 63.0 Rate = 0.004 +/- 0.0008 [Sun Mar 11 07:56:16 2012] Off-axis axis estimate = 13.30' [Sun Mar 11 08:23:22 2012] Using EEF radius (= 13.08 ")to estimate initial spatial extent for simple fitting [Sun Mar 11 08:23:22 2012] Initial guess for spatial extent in simple fitting = 13.08" [Sun Mar 11 08:23:22 2012] source mask rpix=3.0, npix_max = 49, mask sum = 44, frac = 0.895 [Sun Mar 11 08:23:22 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 13.08" [Sun Mar 11 08:54:15 2012] fullrun_mos1_xmm0505381301_pi300-10000_cl_pass0_src12.ximg exists [Sun Mar 11 08:54:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505381301_pi300-10000_cl_pass0_src12.csv [Sun Mar 11 08:54:15 2012] fullrun_mos1_xmm0505381301_pi300-10000_cl_pass0_src12_1.ximg exists [Sun Mar 11 08:54:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505381301_pi300-10000_cl_pass0_src12.csv [Sun Mar 11 08:54:15 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0505381301_pi300-10000_cl_pass0_src12_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0505381301_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Mar 11 08:54:15 2012] fullrun_mos1_xmm0505381301_pi300-10000_cl_pass0_tfrozen_src12.ximg exists [Sun Mar 11 08:54:15 2012] fullrun_mos1_xmm0505381301_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists [Sun Mar 11 08:54:15 2012] Fit fullrun_mos1_xmm0505381301_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly [Sun Mar 11 09:36:27 2012] Spatial fit model total counts = 144.773000, observed total counts = 137.000000 [Sun Mar 11 09:36:27 2012] Offset between fit and detection position for source 6 = 2.360345 pixels [Sun Mar 11 09:36:27 2012] 143.943400 total counts/ 124.822000 bgd. counts: snr = 1.711489 Spatial fit parameters: Offset between fit and detection position for source 6 = 2.360345 pixels Position = (283.3, 481.4) = 23 37 9.14 -55 32 23.1 Extent = 9.0 (3.7-26.2)", rotation angle = 0 Source counts = 19.1 +/- 12.0 Background counts = 124.8 Rate = 0.002 +/- 0.001 Deleting source due to low Poisson probability