[Fri Jul 13 07:45:50 2012] Detection parameters:
  Position = (356.8, 184.7) = 23 31 7.58 -55 53 55.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 358.3 +/- 23.7
  Background counts = 11.8
  Rate = 0.08 +/- 0.005

[Fri Jul 13 07:45:50 2012] Off-axis axis estimate = 9.27'
[Fri Jul 13 07:46:56 2012] Using EEF radius (= 11.06 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 07:46:56 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jul 13 07:46:56 2012] Initial guess for spatial extent in simple fitting = 11.06"
[Fri Jul 13 07:46:56 2012] source mask rpix=2.5, npix_max = 37, mask sum = 36, frac = 0.972
[Fri Jul 13 07:46:56 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.06"
[Fri Jul 13 08:08:29 2012] fullrun_pn_xmm0505381101_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jul 13 08:08:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505381101_pi300-10000_cl_pass0_src1.csv
[Fri Jul 13 08:08:29 2012] fullrun_pn_xmm0505381101_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jul 13 08:08:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505381101_pi300-10000_cl_pass0_src1.csv
[Fri Jul 13 08:08:29 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505381101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505381101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 08:08:29 2012] fullrun_pn_xmm0505381101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jul 13 08:08:29 2012] fullrun_pn_xmm0505381101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jul 13 08:08:29 2012] Fit fullrun_pn_xmm0505381101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Jul 13 08:36:43 2012] Spatial fit model total counts = 472.728000, observed total counts = 473.000000
[Fri Jul 13 08:36:43 2012] Offset between fit and detection position for source 1 = 0.233541 pixels
[Fri Jul 13 08:36:43 2012] 477.297000 total counts/ 231.801000 bgd. counts: snr = 16.124519
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.233541 pixels
  Position = (356.7, 184.4) = 23 31 7.61 -55 53 55.4
  Extent = 5.5 (4.8-6.2)", rotation angle = 0
  Source counts = 245.5 +/- 21.8
  Background counts = 231.8
  Rate = 0.03 +/- 0.003
[Fri Jul 13 08:36:43 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 08:36:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 08:36:43 2012] Assessing source extent using major axis lower bound
[Fri Jul 13 08:36:43 2012] Source does appear to be extended
[Fri Jul 13 08:36:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 08:36:53 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 13 08:36:53 2012] Initial guess for spatial extent in simple fitting = 5.50"
[Fri Jul 13 08:36:53 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.963
[Fri Jul 13 08:36:53 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.50"
[Fri Jul 13 08:56:01 2012] fullrun_pn_xmm0505381101_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jul 13 08:56:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505381101_pi300-10000_cl_pass1_src1.csv
[Fri Jul 13 08:56:01 2012] fullrun_pn_xmm0505381101_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jul 13 08:56:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505381101_pi300-10000_cl_pass1_src1.csv
[Fri Jul 13 08:56:01 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505381101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505381101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 08:56:02 2012] fullrun_pn_xmm0505381101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jul 13 08:56:02 2012] fullrun_pn_xmm0505381101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jul 13 08:56:02 2012] Fit fullrun_pn_xmm0505381101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jul 13 09:25:14 2012] Spatial fit model total counts = 424.896000, observed total counts = 427.000000
[Fri Jul 13 09:25:14 2012] Offset between fit and detection position for source 1 = 0.053296 pixels
[Fri Jul 13 09:25:14 2012] 428.089000 total counts/ 198.698000 bgd. counts: snr = 16.273450
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.053296 pixels
  Position = (356.8, 184.5) = 23 31 7.59 -55 53 55.2
  Extent = 5.1 (4.5-5.7)", rotation angle = 0
  Source counts = 229.4 +/- 20.7
  Background counts = 198.7
  Rate = 0.03 +/- 0.002
[Fri Jul 13 09:25:14 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 09:25:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 09:25:14 2012] Assessing source extent using major axis lower bound
[Fri Jul 13 09:25:14 2012] Source does appear to be extended
[Fri Jul 13 09:25:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 09:25:25 2012] XMMSAS src. selection expression = ellipse(30992.282000, 16000.098800, 305.814609, 305.814609, 0.000000, X, Y)
[Fri Jul 13 09:25:25 2012] Writing source region out to fullrun_pn_xmm0505381101_pi300-10000_pass1_cl_src1_src.reg
[Fri Jul 13 09:25:25 2012] Extracting stamp from image fullrun_pn_xmm0505381101_pi300-10000_cl_sm2.00.img.gz, (339, 167) - (374, 202)
[Fri Jul 13 09:25:25 2012] XMMSAS bgd. selection expression = annulus(30992.282000, 16000.098800, 509.691015, 1019.382029, X, Y)
[Fri Jul 13 09:25:25 2012] Writing fullrun_pn_xmm0505381101_pi300-10000_pass1_cl_src1.gif
[Fri Jul 13 09:25:31 2012] Mean detx,y = (9963.13, 3060.66) 
[Fri Jul 13 09:25:33 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 13 09:25:45 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 13 09:25:45 2012] Setting source spectrum file to fullrun_pn_xmm0505381101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jul 13 09:25:45 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505381101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Jul 13 09:57:40 2012] Updating aperture counts using extracted products
[Fri Jul 13 09:57:40 2012] Error reading totcts from fullrun_pn_xmm0505381101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jul 13 09:57:41 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 13 09:57:41 2012] Using photon index=1.80, rate=0.0274, arf fullrun_pn_xmm0505381101_pi300-10000_pass1_cl_src1.arf
[Fri Jul 13 09:57:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 13 09:57:42 2012] Updating source flux to 1.5e-13
[Fri Jul 13 09:58:37 2012] Reading fit data from xmm0505381101/analysis//spectral/fullrun_pn_xmm0505381101_pi300-10000_pass1_cl_src1_pl.csv
[Fri Jul 13 09:58:37 2012] Spectral fit parameter nH value = 1.11352e+21
[Fri Jul 13 09:58:37 2012] Spectral fit parameter PhoIndex value = 1.74537
[Fri Jul 13 09:58:37 2012] Failed to get F(0.3-8.0) from xmm0505381101/analysis//spectral/fullrun_pn_xmm0505381101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Jul 13 09:58:37 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 13 09:58:37 2012] Using Nh = 1.1e+21, photon index=1.75, rate=0.0274, arf fullrun_pn_xmm0505381101_pi300-10000_pass1_cl_src1.arf
[Fri Jul 13 09:58:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 13 09:58:37 2012] Updating source flux to 2e-13