[Fri Jul 13 07:46:21 2012] Detection parameters:
  Position = (240.0, 302.7) = 23 32 7.87 -55 45 20.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 87.8 +/- 11.6
  Background counts = 4.3
  Rate = 0.01 +/- 0.002

[Fri Jul 13 07:46:21 2012] Off-axis axis estimate = 4.25'
[Fri Jul 13 08:18:32 2012] Using EEF radius (= 8.55 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 08:18:32 2012] Initial guess for spatial extent in simple fitting = 8.55"
[Fri Jul 13 08:18:32 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.028
[Fri Jul 13 08:18:32 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 8.55"
[Fri Jul 13 08:36:39 2012] fullrun_mos2_xmm0505381101_pi300-10000_cl_pass0_src4.ximg exists
[Fri Jul 13 08:36:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505381101_pi300-10000_cl_pass0_src4.csv
[Fri Jul 13 08:36:39 2012] fullrun_mos2_xmm0505381101_pi300-10000_cl_pass0_src4_1.ximg exists
[Fri Jul 13 08:36:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505381101_pi300-10000_cl_pass0_src4.csv
[Fri Jul 13 08:36:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505381101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505381101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 08:36:39 2012] fullrun_mos2_xmm0505381101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Fri Jul 13 08:36:39 2012] fullrun_mos2_xmm0505381101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Fri Jul 13 08:36:39 2012] Fit fullrun_mos2_xmm0505381101_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Fri Jul 13 08:36:47 2012] Spatial fit model total counts = 106.276000, observed total counts = 106.000000
[Fri Jul 13 08:36:47 2012] Offset between fit and detection position for source 6 = 0.151572 pixels
[Fri Jul 13 08:36:47 2012] 104.420900 total counts/ 41.988200 bgd. counts: snr = 9.634928
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.151572 pixels
  Position = (240.0, 302.6) = 23 32 7.90 -55 45 21.5
  Extent = 4.9 (3.9-6.1)", rotation angle = 0
  Source counts = 62.4 +/- 10.2
  Background counts = 42.0
  Rate = 0.006 +/- 0.001
[Fri Jul 13 08:36:47 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 08:36:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 08:36:47 2012] Assessing source extent using major axis lower bound
[Fri Jul 13 08:36:47 2012] Source does appear to be extended
[Fri Jul 13 08:36:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 09:06:48 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 13 09:06:48 2012] Initial guess for spatial extent in simple fitting = 4.88"
[Fri Jul 13 09:06:48 2012] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.140
[Fri Jul 13 09:06:48 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 4.88"
[Fri Jul 13 09:25:09 2012] fullrun_mos2_xmm0505381101_pi300-10000_cl_pass1_src4.ximg exists
[Fri Jul 13 09:25:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505381101_pi300-10000_cl_pass1_src4.csv
[Fri Jul 13 09:25:09 2012] fullrun_mos2_xmm0505381101_pi300-10000_cl_pass1_src4_1.ximg exists
[Fri Jul 13 09:25:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505381101_pi300-10000_cl_pass1_src4.csv
[Fri Jul 13 09:25:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505381101_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505381101_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 09:25:09 2012] fullrun_mos2_xmm0505381101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Fri Jul 13 09:25:09 2012] fullrun_mos2_xmm0505381101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Fri Jul 13 09:25:09 2012] Fit fullrun_mos2_xmm0505381101_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Fri Jul 13 09:25:18 2012] Warning, spatial fit 4 centroid is now closest to src. 3
[Fri Jul 13 09:25:18 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 09:25:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 09:25:18 2012] Assessing source extent using major axis lower bound
[Fri Jul 13 09:25:18 2012] Source does appear to be extended
[Fri Jul 13 09:25:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 09:50:12 2012] XMMSAS src. selection expression = ellipse(20828.524640, 26275.827400, 292.902608, 292.902608, 0.000000, X, Y)
[Fri Jul 13 09:50:12 2012] Writing source region out to fullrun_mos2_xmm0505381101_pi300-10000_pass1_cl_src6_src.reg
[Fri Jul 13 09:50:12 2012] Extracting stamp from image fullrun_mos2_xmm0505381101_pi300-10000_cl_sm2.00.img.gz, (223, 286) - (257, 319)
[Fri Jul 13 09:50:12 2012] XMMSAS bgd. selection expression = annulus(20828.524640, 26275.827400, 488.171014, 976.342028, X, Y)
[Fri Jul 13 09:50:12 2012] Writing fullrun_mos2_xmm0505381101_pi300-10000_pass1_cl_src6.gif
[Fri Jul 13 09:50:44 2012] Mean detx,y = (4385.12, -5607.71) 
[Fri Jul 13 09:50:44 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 13 09:50:48 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 13 09:50:49 2012] Setting source spectrum file to fullrun_mos2_xmm0505381101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Fri Jul 13 09:50:49 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505381101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Fri Jul 13 09:56:16 2012] Not generating rmf since there are only 62 counts
[Fri Jul 13 09:56:16 2012] rmf not generated due to insufficient counts
[Fri Jul 13 09:57:44 2012] Updating aperture counts using extracted products
[Fri Jul 13 09:57:44 2012] Error reading totcts from fullrun_mos2_xmm0505381101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Fri Jul 13 09:57:45 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 13 09:57:45 2012] Using photon index=1.80, rate=0.00617, arf fullrun_mos2_xmm0505381101_pi300-10000_pass1_cl_src6.arf
[Fri Jul 13 09:57:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 13 09:57:45 2012] Updating source flux to 9.7e-14
[Fri Jul 13 09:58:00 2012] Source 6 has fewer than 100.000000 counts, skipping spectral fitting